Industrial integration will help the instrumentation industry

With the continuous innovation of market demand and the improvement of people's life and water products, the development of all walks of life has entered a new period. The development of China's instrumentation industry has also entered a new stage. The country has listed the instrumentation industry as the throat industry of today's social development, giving it a grand strategic significance. And with the improvement of global environmental protection, low carbon, green standards, instrumentation industry will inevitably show a rapid development trend, and all we have to do is to ensure that this industry is healthy and orderly in the existing market mechanism. development of.

The second year of the Twelfth Five-Year Plan has already entered. In the past year, the state has already included the development of the instrumentation industry in this plan. The overall requirements for the development of all walks of life in the 12th Five-Year Plan continue to increase. It is an important trend to develop a green economy, use new energy sources, develop new industries, and pay attention to ecological protection. According to the “Planning”, during the 12th Five-Year Plan period, the development strategy of the instrumentation industry is to strengthen innovation, pay close attention to the basics, market orientation, broaden the scope, innovate the system, optimize the structure, and continue to promote and revitalize the industry. Therefore, China's instrumentation industry must rely on the strong spring of the 12th Five-Year Plan to use this time to develop strongly and accelerate the pace of progress and beyond.

As the source of innovation in other industries, the instrumentation industry has extraordinary significance and unparalleled status for the development of a green, low-carbon, modern economy. Looking at the development of China's instrumentation industry, we have to see that compared to the international high-end instrumentation industry, China is still in a position to urgently develop. Some high-end instruments still cannot be produced by ourselves, or are Some aspects of the process are still in the primary manufacturing stage and do not mention the height of scientific research. And my service level in the after-sales service and maintenance of the product is still far from enough.

Although China's instrumentation industry has long been a big gap with foreign countries, it has never stopped the pace of development. Especially in recent years, China’s various emerging industries continue to spur the development momentum. These emerging industries such as the environmental protection industry, new energy industry, microbiology industry, chemical and chemical industry, etc. have produced a great deal of development for instrumentation. Impact, and played a huge role in promoting. At the same time, many intelligent technologies in China are constantly developing. These technologies are constantly helping the instrumentation industry to transform into high-end manufacturing. China Instrument and Instrument Network sees that the development of emerging industries has led to the development of the instrumentation industry, and the development of the instrumentation industry has in turn stimulated the innovation of emerging industries. It is believed that such a virtuous cycle will continue to continue.

The development of the industry is a long-term issue, and it is a matter that requires the coordinated development and mutual integration of various related industries. The development of the instrumentation industry must be strongly supported by other industries, which requires an overall coordinated development of the industry. The development of industries such as petrochemicals, environmental protection industries, and energy development should not be neglected. Only by coordinating, stabilizing, and effective common development can we bring about a breakthrough in a certain industry and make our country's instrumentation industry better and faster. Horizontal development track.

Brake Valve

What to do if the foot brake valve of Liugong loader leaks?
The reason lies in the incomplete exhaust of the brake fluid and the Brake System (provided that there is no physical damage to the brake system) 50C loader adopts the pneumatic brake system of "air-over oil" (power booster) method, The front and rear axles are braked by pushing the pistons in the brake calipers by hydraulic oil. The brake system must be exhausted thoroughly before the whole machine leaves the factory. But after working continuously for a long time, the brake fluid in the Brake Caliper will produce bubbles. If these bubbles cannot be discharged smoothly, it will 100% cause the brake to fail, the brake is weak and weak. At the same time, after stepping on the brake, the brake fluid cup There will be bubbles coming out of it. The main reason is that the air brake system adopts the structure of brake caliper + brake disc to perform service braking. At the same time, the operating cycle of the loader is very short, and the loading and unloading cycle is as fast as tens of seconds. The temperature on the disc is very high. The temperature of 300 degrees Celsius is normal. When it is high, the temperature is 500-600 degrees Celsius. So you can see that the color of the brake disc sometimes turns blue, which is equivalent to quenching the brake disc at high temperature. The high temperature of the brake disc will be transferred to the brake fluid through heat radiation, so after a long time of work, the temperature of the brake fluid will gradually rise! ! So the question is, how high temperature can the general brake fluid withstand? 120? 150 degrees Celsius? This is absolutely related to the quality of the brake fluid.
Solution: The most thorough method is to use a hydraulic brake system and a wet bridge, but this is too expensive and unrealistic. Then it is to replace the good brake fluid and perform exhausting work thoroughly. This requires three people to work together at the same time, one stepping on the brake pedal, one filling the booster oil cup with brake fluid and observing the condition of the brake fluid cup, one standing Vent/exhaust next to the bridge until the brake is applied and the clear brake fluid is drained from the exhaust nozzle on the caliper.
SEM 50F, 650 Brake valve
Liugong loaders ZL50CN, 855N, 856 valve,
SDLG 956L 952H 953 Brake valve,
XCMG Brake valve LW500KL ZL50GN,
Komatsu WA380, WA380-3, WA380-5, WA430-5 Brake valve
DEGONG loader Brake valve
Foton Lovol Loader Brake valve
Lonking 855N loader Brake valve
XGMA 932 936 956 Loader Brake valve
Changlin Loader Brake valve
Shantui SL50W Brake valve

And we have more.


Brake Valve Of Xcmg Loader,Brake Valve,Hand Brake Valve,Comnination Brake Valve

Brake Valve Of Xcmg Loader,Brake Valve,Hand Brake Valve,Comnination Brake Valve

Shandong Tianfu International Trade Co.,Ltd. , https://www.tfloaderparts.com

Posted on