Recently, BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. filed a recall plan with the AQSIQ according to the requirements of the Regulations on the Management of Defective Automobile Product Recall, and decided to recall the following from March 27, 2017. Vehicles, a total of 8604 vehicles:
(1) BMW Brilliance Automotive Co., Ltd. recalled some domestically produced Brilliance BMW 535Li, which was produced during the period from April 13, 2011 to June 30, 2011, totaling 1,179 vehicles;
(2) BMW (China) Automobile Trading Co., Ltd. recalled some of the imported BMW 335i, 535i, 640i, 730Li, 740Li and Z4 produced between December 1, 2010 and April 29, 2011, for a total of 7,425 vehicles.
The recall involved flexible connectors for the rear drive vehicle drive shaft. Due to the manufacturer's manufacturing reasons, the specific batch of connectors is insufficient in strength and may be damaged or broken after long-term use. If the connecting member breaks while the vehicle is running, the vehicle will lose its driving force, increasing the risk of traffic accidents and posing a safety hazard. BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will conduct free inspections for vehicles within the scope of the recall. If the connecting parts installed on the vehicle are defective batch products, they will be replaced free of charge to eliminate potential safety hazards.
BMW Brilliance Automotive Co., Ltd. and BMW (China) Automobile Trading Co., Ltd. will notify customers by registered mail. Users can call the BMW Service Hotline 400-800-6666 for consultation. If you feel abnormal noise or abnormal vibration during driving, please go to the authorized dealer for inspection. Owners can also visit the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) for more information. In addition, you can also call the Quality Hotline of the Defective Product Management Center of the AQSIQ or the quality hotline of the local entry-exit inspection and quarantine institution: 12365 (switch No. 2) to reflect the problems in the implementation of the recall activity or to submit defects.
High Strength Steel Tie Rod are steel structural members made of carbon structural steel and alloy steel, processed by machining, heat treatment and surface anti-corrosion treatment, supplemented by adjusting sleeves, lock and joints etc. The steel tie rod are important components of steel structures for construction of giant, large span buildings and ship docks. They are mainly used for prestressed parts and large span buildings in construction projects. While the strength of the product is improved, but the plasticity index is not reduced, which satisfies the principle of using the same amount of strength in the architectural design. The tie rods, tie bars, tension rods and tension bars steel grades are specified as , grade 785, grade 830, grade 930, grade 1080 etc.
Post Tension Bar,Tie Bar Construction,Post Tension Rods,Post Tension Bar For Bridge
SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdhighstrengthsteelbolts.com