Global ethylene production capacity will reach 180 million tons in 2016

Mark Elramo, vice president of research and analysis at IHS Chemicals, said that due to the rapid growth of new production capacity in the Middle East and Asia, global ethylene production capacity will increase from about 150 million tons/year in 2011 to about 1.8 in 2016. Billion tons/year. Among them, the ethylene production capacity in the Middle East will increase from approximately 26 million tons/year in 2011 to 35 million tons/year in 2016; Asia's ethylene production capacity will increase from approximately 50 million tons/year in 2011 to approximately 65 million in 2016 Tons/year.

Short Radius Elbow

Short radius elbow refers to that the radius of curvature is 1 times of the elbow pipe diameter,also referred to as 1D.

Elbow push hot forming process is the use of special elbow pushing machine, mandrel and the heating device, so that pushing pipe raw material to forward movement in the mold set, be heated in motion, expanding and bending forming process. Elbow push hot deformation characteristics of tube diameter is determined according to the law of constant volume before and after deformation of the metal material, use smaller diameter than the diameter of the elbow, through mandrel to control the deformation process of the blank, to other parts of the compensation due to thinning of the diameter expands, thereby obtaining a uniform wall thickness of the elbow.

Short Radius Elbow,Short Radius,Stainless Steel Short Radius Elbow,Pipe Elbow Radius

CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com