Bluestone crusher works
During work, the bluestone enters the machine from the inlet, the motor drives the large wheel and the eccentric shaft to rotate, and the eccentric shaft is connected with the moving cymbal. The moving cymbal will follow the eccentric shaft to make irregular movement around the fixed fixed fixed on the crusher. The movements are close to the time, and sometimes they are far away. When approaching, the bluestone is squeezed, sheared, and produces a sub-speed moving toward the discharge opening; when it is away, the bluestone is suspended, and driven to the discharge port by gravity and the above-mentioned sub-speed, the qualified material Discharge, the unqualified material returns to the cavity and continues to be broken.
Bluestone crusher performance characteristics
1. The feed size is 120-1500mm, the production capacity is 1-220t/h, and the highest compressive strength is 320MPa.
2. Increased the size of the eccentric shaft bearing to make it have higher bearing capacity.
3. Optimize the overall structure and the weight section to effectively reduce the vibration frequency of the machine.
4. The reliability of the bluestone crusher accessories is enhanced and durable.
5. Optimized the crushing cavity type, the seesaw can be interchanged and used four times to improve material utilization.
6. The overall structure of the bluestone crusher is simple, the failure rate is low and the maintenance is convenient.
Combined Flow Closed Cooling Tower
Closed Cooling Tower is operated by circulating water or fluid, which is divided into two closed loops.
1. Circulation in the tower: the circulating water or fluid passes through the hot zone environment. After the water temperature rises, it enters the surface cooler in the tower, and the heat is sent to the environment outside the tower through the surface cooler and ventilation fan. The cooled circulating water or fluid is sent to the heat source by the water pump.
2. Circulation outside the tower: the spray water is sent to the spray system by the water tank through the water pipe. After spraying, the spray water first exchanges heat with the filler, so that the spray water can be cooled rapidly. At this time, the water contacts the surface of the surface cooler for heat exchange. Part of the hot steam is discharged through the ventilation fan, and the cooled spray water drops to the water tank for secondary circulation to form an external circulation for cooling.
Combined Flow Closed Cooling Tower,Bac Cooling Tower,Cooling Tower Systems,Chiller Tower
Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com