11.7m 60 square semi-trailer bulk feed truck 2021 latest offer|Picture|Price|Configuration|Factory
Zhang Chaoqun, manufacturer of semitrailer bulk feed truck
Vehicle model: CL9400ZSLSS
Walking part configuration: three-axis high and low semi-hanging frame, 5370+1310+1310mm wheelbase, 6mm below 6mm (double layer) on the web of the front wing of the girder, 50# traction pin, 28 tons of outriggers, 13 tons of Guangdong Fu Huaqiao, car
Axle/3 axle, 16 tons of brake pads, 12R22.5 tires, ABS, 13X8 leaf springs, a 1200mm toolbox, a spare tire holder, four large and two small air chambers. The upper tank body is made of 4mm thick steel plate, and the tank body is divided into
5 warehouses, can independently control the unloading sequence and speed of each sub-silo. The whole vehicle has 4 augers (two bottom horizontal augers, tail lifting augers, and top discharge augers), powered by 4 5.5kw Siemens motors, 380v Driven by external power supply
Each screw auger works, the top screw can be operated by wireless remote control, and the top screw is hydraulically controlled to lift, and it can be rotated 180° left and right!
With the development of the aquaculture industry from the original open and free-range farming to centralized, large-scale, and mechanized, bulk feed trucks have also emerged. Its emergence has solved the problems of bagging costs, labor costs, and loading costs in feed factories.
It also solves the time-consuming and labor-intensive handling and transportation of bags in the farm. With the feed tower and automatic feeding system in the farm, it can quickly and efficiently solve large-scale feeding.
1. Purpose
Bulk feed truck, also known as bulk feed truck, feed truck. It is mainly used to transport finished bulk feed products or raw feed production from feed mills to livestock farms, poultry farms and feed processing users. At the same time, it can also be used to transport
Transport certain non-corrosive powdery and granular raw materials, such as powder materials for pharmaceutical factories and grain storage turnover.
2. Product features
Transporting feed in bulk not only saves labor, but also has a lower cost than transporting it in bags. Bulk feed is sealed and transported in the tank to reduce loss, ensure quality and avoid secondary pollution. Fully automatic loading and unloading, continuous
Work, greatly improve production efficiency. Separate bins can be installed in the tank, which can simultaneously transport a variety of different types of feed or puffing media. The parts are standardized and easy to repair and maintain.
Zhang Chaoqun, manufacturer of semitrailer bulk feed truck
3. Cooperative customers
Large-scale feed mills, livestock farms, poultry farms, etc.,
Such as: Wen Group, Zhengda Group, Zhengbang Group, New Hope Group, COFCO Group, Muyuan Group, Tangrenshen Group, New Wufeng Group, etc.
Four, a few issues to pay attention to
5. The name of the loaded medium; the proportion of the loaded medium; the required volume; special transportation requirements, etc.
Feed truck brand
Currently, the bulk feed trucks on the market mainly include Dongfeng, Shaanxi Automobile, Liuzhou Automobile, Foton, and Jiefang.
Feed cart driving mode
1. Hydraulic drive (the hydraulic motor is driven by the power take-off)
2. Motor drive
Zhang Chaoqun, manufacturer of semitrailer bulk feed truck
ã€Instructions】
1. Loading
When the vehicle reaches the loading position of the feed factory, open the roof feeding cover to realize loading.
2. Unloading
1. The lifting auger is lifted and rotated so that the discharge port is aligned with the feed storage tank, and the lifting auger blades are turned on to rotate.
2. Vertical auger blade rotation work
3. Rotation of horizontal auger blades
※Important: The sequence of shutting down the auger after unloading is: first turn off the horizontal auger blade rotation, then turn off the vertical auger blade rotation, and finally turn off the lifting (discharge) auger blade rotation, lift before driving
Liter (discharge) screw auger is classified, disconnect the external power and store it before driving.
Optional configuration:
1. Optional electric operation
2. Optional hydraulic operation
3. Optional on-board generator
4. Optional wireless remote control
Zhang Chaoqun, manufacturer of semitrailer bulk feed truck
Special vehicle after-sales service
The quality policy we follow is: product leadership is our eternal goal, customer satisfaction is our unremitting pursuit, and quality service is our best promise. To this end, we make the following commitments:
Free warranty period: one year (two years for some models) tracking service time: lifetime
Price method of spare parts supply after free period
1. Method: According to the user's requirements, the user will provide uniformly at the local chassis technical service station or directly supply the accessories by our factory's after-sales service department.
2. The accessories are only charged for the cost of production, no other costs are added.
Complete vehicle issuance: Chassis certification, vehicle certification, motor vehicle registration invoice, vehicle-mounted tools, vehicle warranty manual, national service station directory, etc.
After-sales service: From the day of delivery to the customer, within the normal range of use, within 10,000 kilometers of driving or within one year for free repairs, more than one year, only charge for parts, on-site service Arrival time: within 1000 kilometers, arrive within 24 hours, Arrive within 48-72 hours from 1000 kilometers away, contact me directly, and distribute the corresponding accessories according to customer needs; if the product chassis is faulty, please repair it at the nearest service station according to the chassis manufacturer.
Zhang Chaoqun, manufacturer of semitrailer bulk feed truck
Professional, dedicated, and attentive!
Create high-quality ideal models for you!
Sales Manager: Zhang Chaoqun
Contact: 188-7299-7402 (micro: A18872997402)
Company Address: Gangchengli Automobile Industrial Park, Plain, Southern Suburb, Suizhou City, Hubei Province
Sincerely look forward to your call!
Automatic Tightening Unit,Automatic Locking Tightening Unit,Automatic Tightening Line Unit,Screw Assembly Line Unit
Suzhou Huaweile Automation Technology Co., Ltd , https://www.hwlelocking.com