Smart Self-Priming Pump with Flow Sensor and Pressure Sensor

    
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.




                                                                     



FAQ     
Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.




                                                                     



FAQ

Reel of Thread

Reel Of Thread,Thread Reel,Silk Thread Reels,Sewing Thread Reels

Ningbo Dingming Machinery Manufacturing Co.,Ltd , https://www.dingmingmachine.com