Pneumatic fenders is a leading anti-collision device for marine application in the world today. This compressed air rubber fender is used as a protective medium. Therefore, pneumatic rubber fenders serves as a protective medium against collision when ship-to-ship contact (STS) and ship-to-berthing (STB). Pneumatic fenders has the advantages of massive energy absorption with low unit surface pressure acted upon the ship. So penumatic fenders has become an ideal ship protection medium used extensively by large tankers, LPG vessels, ocean platforms, large docks, harbor and wharfs.
Core attributes
Pneumatic fenders have any advantages including:
Easy and fast to deploy
Very low reaction and hull pressure
Performance adjustable by varying initial pressure
Suitable for areas with large or small tides
Maintains large clearances between hull and structure
Optional chain-tyre nets for heavy duty applications
Low maintenance
Optional chain & tyres for heavy duty use
Application:
Pneumatic fenders are suitable for many applications including:
Tankers, Gas Carriers and Bulk Cargo Ships
Fast ferries and aluminum hulled vessels
Temporary of permanent installations
As stand-off fenders to realign ships with shore facilities
Performance
Pneumatic Fender Technical Performance Table(As followings)
Notes:
1. Guaranteed energy absorption represents the guaranteed energy absorption at 60% deflection.
2. Tolerance of reaction fore and deflection are as follows: Reaction: 10%, Deflection: 5%.
3. Each reaction and energy absorption is measured under static conditions.
4. Testing pressure rate indicates the testing pressure at the factory.
5. Weight of fender body and net may vary 10%.
6. Special sizes are available upon request.
7. Different levels of performance according to internal air pressure levels specified this fenders.
Testing and quality
Yutung is very focused on the quality of their product. Yutung have invested in the most equipment for testing in order to meet the customer'sdemands for high quality. Yutung's fenders are used by customers world wide and they
Have been tested under rough conditions both in warm and cold climate. The large amounts of satisfied customers are our best references.
| Specifications (mm) | At 60% compression; initial pressure is 0.05MPa |
Weight of sphere ±10% |
||
| Diameter | Length | Energy Absorption (KJ) |
Reaction Force (KN) |
KG |
| 200 | 500 | Â | Â | Â |
| 300 | 500 | Â | Â | Â |
| 500 | 1000 | 6 | 64 | 25 |
| 600 | 1200 | 10 | 86 | 35 |
| 700 | 1500 | 17 | 137 | 50 |
| 1000 | 1500 | 32 | 181 | 80 |
| 1000 | 2000 | 45 | 257 | 100 |
| 1200 | 2000 | 63 | 297 | 120 |
| 1350 | 2500 | 100 | 426 | 170 |
| 1500 | 3000 | 153 | 579 | 320 |
| 1700 | 3000 | 190 | 637 | 400 |
| 2000 | 3500 | 308 | 875 | 590 |
| 2500 | 4000 | 663 | 1380 | 1000 |
| 2500 | 5500 | 932 | 2010 | 1400 |
| 3000 | 5000 | 1050 | 2030 | 1800 |
| 3000 | 6000 | 1315 | 2488 | 2200 |
| 3300 | 6500 | 1814 | 3015 | 2700 |
| 3500 | 6000 | 2018 | 3286 | 2800 |
| 3500 | 6500 | 2325 | 3656 | 3200 |
| 3500 | 7000 | 2650 | 4018 | 3600 |
| 3600 | 7200 | 3180 | 4821 | 4320 |
CNC turning is mainly used to process workpieces of revolving bodies, but sometimes it is also possible to clamp workpieces by customizing fixtures to process non-revolving products, such as planes, grooves, etc. Compared with manual turning and automatic turning, CNC turning has the characteristics of high efficiency and high precision. Moreover, with the development of science and technology, the requirements for workpieces are getting higher and higher, and more complex and higher precision workpieces need to be processed. In order to deal with such workpieces, multi-axis linkage CNC lathes have appeared, and multi-axis linkage turning machining usage is becoming more and more common.
SCZY has multiple three-axis CNC lathes, as well as multiple 4-axis linkage and 5-axis linkage CNC lathes, we can process complex-shaped rotating parts, usually the tolerance can reach ±0.01mm (specifically, it depends on the product material and structure. ), if we need better precision requirements, we can cooperate with the grinding machine for finishing, which can achieve a high precision of ±0.002mm. Our processing range includes the processing of stainless steel, alloy steel, special steel, ordinary steel, aluminum, copper, plastic and so on. Here are some CNC turning products we have processed:
CNC Turning Services, CNC Turned Parts, CNC Turning Machining, Precision Turing Parts, CNC Turning
Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com