Metallurgical equipment is a technology-intensive and capital-intensive enterprise. Over the past few years, the rapid development of China's metallurgical equipment industry has benefited from the rapid economic growth in China, which has led to the development of the iron and steel industry and thus promoted the development of China's domestic metallurgical equipment manufacturing industry. . The Central Economic Work Conference pointed out that in 2008 the implementation of a sound fiscal policy and tight monetary policy, there is no doubt that the country adopts a "tight monetary policy," will have an impact on the entire manufacturing industry, including metallurgical equipment. .
At the end of 2007, the General Office of the State Council issued a notice requiring strict control over new projects. The General Office of the State Council has forwarded the Opinions of the National Development and Reform Commission on Strengthening the Control of Fixed Assets and Strictly Controlling Newly Launched Projects, requiring that all new projects be cleared up. The five ministries and commissions including the National Development and Reform Commission, the Ministry of Land and Resources, and the China Banking Regulatory Commission issued the “Guidelines for the Clearance of Newly-Launched Projects†with “special dispatchesâ€, requiring new projects with a total investment of 100 million yuan or more to be included in the statistical scope in the first half of 2007. One-by-one comprehensive clean-up. Among them, the electricity, steel, electrolytic aluminum and other industries are required to clean up the total investment of 30 million yuan and above. This is precisely the specific measures taken by the state to implement a tight monetary policy, to prevent the rapid growth of economic growth from overheating, and to prevent price from structural rise to obvious inflation.
Therefore, the difficulty of loans and the increase of financing costs are serious problems faced by the steel industry and the metallurgical equipment industry in 2008. In 2008, a number of backward steel production lines in China will be eliminated. A number of metallurgical construction projects that do not meet the requirements will be cancelled, and the market demand for metallurgical equipment will also be reduced. This is an inevitable trend.
With the implementation of the “tight†monetary policy of the country, the competition in the metallurgical equipment market in 2008 will be more intense. For manufacturers and merchants, innovating the service concept and raising service awareness is also under the “tight†environment. It is an important measure to expand the metallurgical equipment market. China's metallurgical equipment market is very large. Under the macro-control, as a metallurgical equipment manufacturing enterprise, it is necessary to study the status quo of China's steel industry and China's metallurgical equipment industry, target the metallurgical equipment that China's metallurgical enterprises urgently need, conduct research and development, and open up new markets.
Relevant experts stated that the effect of the national policy to revitalize the equipment manufacturing industry will be further manifested in 2008.
For example, a series of policies that the state encourages the use of domestically produced equipment will drastically boost the demand for domestically produced equipment, thereby bringing about an overall upgrade of the domestic manufacturing industry and a continuous increase in long-term competitiveness. Currently, a series of policies including 40% of domestically-manufactured equipment for offsetting income tax, production-type value-added tax in the northeast and central and western regions, and consumption of imported complete machines and parts and components are being gradually implemented in accordance with the Opinions on Revitalizing the Equipment Manufacturing Industry. Refined policies are gradually being introduced.
At the end of 2007, the implementation of a large-scale metallurgical equipment implementation program in the field of equipment manufacturing was introduced. This is another substantive measure for promoting the localization of the equipment manufacturing industry following the implementation of import tax preferential policies for the equipment manufacturing industry. In the large-scale metallurgical equipment autonomy program, in addition to determining the autonomy goal of the metallurgical equipment during the “Eleventh Five-Year Plan†period, eight metallurgical equipment independent support projects were added. The plan confirms that the large sheet hot and cold continuous rolling complete sets of equipment, pickling and annealing coating processing equipment, large-scale blast furnace gas turbines and autonomy rate of 100,000 cubic meters and below large-scale oxygen generators to reach 70%; 5000 cubic meters and The following autonomy rate for blast furnace blower and blast furnace gas residual pressure heat recovery power generation equipment, oil film bearings for 5 m and below rolling mills and DCS control systems and key instruments shall reach 80%; and for equipment with an autonomy rate of 90%, 5.5 m and below Coal-fired coke oven machinery and equipment, 1,000 tons of daily-active lime and complete sets of equipment, annual production capacity of 5 million tons of pellet production equipment, large-scale converter gas dry purification and recovery device, large-scale heavy plate continuous casting complete sets of equipment, large-scale thick and thick Plate complete sets of rolling equipment, large-scale rolled sheet finishing equipment, large-scale metal tube rolling equipment, and finishing complete sets of equipment. This will be conducive to the development of China's manufacturing equipment industry and the expansion of the metallurgical equipment market.
Going abroad to enter China’s metallurgical equipment into the international market is another good strategy to deal with the tight monetary policy this year. In recent years, the infrastructure construction boom in countries such as Asia, the Middle East, Africa, South America, South Asia and Eastern Europe has just started, the steel industry will develop rapidly, and the metallurgical equipment market will have a huge space. This will become a key market for overseas companies to expand overseas. China's existing metallurgical equipment production technology and energy production capacity are well adapted to the needs of the steel industry in these regions. What's more, China's metallurgical equipment products have a clear price/performance advantage compared with European and American countries and have a strong competitive edge. In 2008, the export of China's metallurgical equipment will be an important field for expanding the market and a new economic growth point for the metallurgical equipment industry.
Under the tight monetary policy, the metallurgical equipment manufacturing industry should upgrade the technology for the development of metallurgical equipment in China, and at the same time change the situation of repeated introduction in China. In 2007, China's investment in metallurgical equipment amounted to 2.138 billion U.S. dollars. At present, in China's large-scale metallurgical equipment that has been put into operation, there are symbolic continuous rolling equipment, continuous casting and rolling equipment, and large-diameter seamless pipe equipment. More than 100 tons of super high-power electric furnaces and other equipment are still mainly imported foreign technology or imported equipment.
The repeated introduction of foreign large-scale key equipment in China's steel industry has never been resolved, which objectively restricts the improvement of the overall quality of China's steel industry, and has also adversely affected the technological upgrading of domestic equipment manufacturing companies. For this reason, to prevent the repetition of metallurgical equipment, any project that is repeatedly introduced or that has already been able to provide technology and equipment in the country should not provide preferential policies such as concessional loans and import tax exemptions. In the course of implementation of the project, if any illegal modification or alteration of the localization plan, serious delay in progress, or obstacles in the implementation of major technical equipment in the process of localization, the responsibility of the relevant units and personnel will be investigated.
At the end of 2007, the General Office of the State Council issued a notice requiring strict control over new projects. The General Office of the State Council has forwarded the Opinions of the National Development and Reform Commission on Strengthening the Control of Fixed Assets and Strictly Controlling Newly Launched Projects, requiring that all new projects be cleared up. The five ministries and commissions including the National Development and Reform Commission, the Ministry of Land and Resources, and the China Banking Regulatory Commission issued the “Guidelines for the Clearance of Newly-Launched Projects†with “special dispatchesâ€, requiring new projects with a total investment of 100 million yuan or more to be included in the statistical scope in the first half of 2007. One-by-one comprehensive clean-up. Among them, the electricity, steel, electrolytic aluminum and other industries are required to clean up the total investment of 30 million yuan and above. This is precisely the specific measures taken by the state to implement a tight monetary policy, to prevent the rapid growth of economic growth from overheating, and to prevent price from structural rise to obvious inflation.
Therefore, the difficulty of loans and the increase of financing costs are serious problems faced by the steel industry and the metallurgical equipment industry in 2008. In 2008, a number of backward steel production lines in China will be eliminated. A number of metallurgical construction projects that do not meet the requirements will be cancelled, and the market demand for metallurgical equipment will also be reduced. This is an inevitable trend.
With the implementation of the “tight†monetary policy of the country, the competition in the metallurgical equipment market in 2008 will be more intense. For manufacturers and merchants, innovating the service concept and raising service awareness is also under the “tight†environment. It is an important measure to expand the metallurgical equipment market. China's metallurgical equipment market is very large. Under the macro-control, as a metallurgical equipment manufacturing enterprise, it is necessary to study the status quo of China's steel industry and China's metallurgical equipment industry, target the metallurgical equipment that China's metallurgical enterprises urgently need, conduct research and development, and open up new markets.
Relevant experts stated that the effect of the national policy to revitalize the equipment manufacturing industry will be further manifested in 2008.
For example, a series of policies that the state encourages the use of domestically produced equipment will drastically boost the demand for domestically produced equipment, thereby bringing about an overall upgrade of the domestic manufacturing industry and a continuous increase in long-term competitiveness. Currently, a series of policies including 40% of domestically-manufactured equipment for offsetting income tax, production-type value-added tax in the northeast and central and western regions, and consumption of imported complete machines and parts and components are being gradually implemented in accordance with the Opinions on Revitalizing the Equipment Manufacturing Industry. Refined policies are gradually being introduced.
At the end of 2007, the implementation of a large-scale metallurgical equipment implementation program in the field of equipment manufacturing was introduced. This is another substantive measure for promoting the localization of the equipment manufacturing industry following the implementation of import tax preferential policies for the equipment manufacturing industry. In the large-scale metallurgical equipment autonomy program, in addition to determining the autonomy goal of the metallurgical equipment during the “Eleventh Five-Year Plan†period, eight metallurgical equipment independent support projects were added. The plan confirms that the large sheet hot and cold continuous rolling complete sets of equipment, pickling and annealing coating processing equipment, large-scale blast furnace gas turbines and autonomy rate of 100,000 cubic meters and below large-scale oxygen generators to reach 70%; 5000 cubic meters and The following autonomy rate for blast furnace blower and blast furnace gas residual pressure heat recovery power generation equipment, oil film bearings for 5 m and below rolling mills and DCS control systems and key instruments shall reach 80%; and for equipment with an autonomy rate of 90%, 5.5 m and below Coal-fired coke oven machinery and equipment, 1,000 tons of daily-active lime and complete sets of equipment, annual production capacity of 5 million tons of pellet production equipment, large-scale converter gas dry purification and recovery device, large-scale heavy plate continuous casting complete sets of equipment, large-scale thick and thick Plate complete sets of rolling equipment, large-scale rolled sheet finishing equipment, large-scale metal tube rolling equipment, and finishing complete sets of equipment. This will be conducive to the development of China's manufacturing equipment industry and the expansion of the metallurgical equipment market.
Going abroad to enter China’s metallurgical equipment into the international market is another good strategy to deal with the tight monetary policy this year. In recent years, the infrastructure construction boom in countries such as Asia, the Middle East, Africa, South America, South Asia and Eastern Europe has just started, the steel industry will develop rapidly, and the metallurgical equipment market will have a huge space. This will become a key market for overseas companies to expand overseas. China's existing metallurgical equipment production technology and energy production capacity are well adapted to the needs of the steel industry in these regions. What's more, China's metallurgical equipment products have a clear price/performance advantage compared with European and American countries and have a strong competitive edge. In 2008, the export of China's metallurgical equipment will be an important field for expanding the market and a new economic growth point for the metallurgical equipment industry.
Under the tight monetary policy, the metallurgical equipment manufacturing industry should upgrade the technology for the development of metallurgical equipment in China, and at the same time change the situation of repeated introduction in China. In 2007, China's investment in metallurgical equipment amounted to 2.138 billion U.S. dollars. At present, in China's large-scale metallurgical equipment that has been put into operation, there are symbolic continuous rolling equipment, continuous casting and rolling equipment, and large-diameter seamless pipe equipment. More than 100 tons of super high-power electric furnaces and other equipment are still mainly imported foreign technology or imported equipment.
The repeated introduction of foreign large-scale key equipment in China's steel industry has never been resolved, which objectively restricts the improvement of the overall quality of China's steel industry, and has also adversely affected the technological upgrading of domestic equipment manufacturing companies. For this reason, to prevent the repetition of metallurgical equipment, any project that is repeatedly introduced or that has already been able to provide technology and equipment in the country should not provide preferential policies such as concessional loans and import tax exemptions. In the course of implementation of the project, if any illegal modification or alteration of the localization plan, serious delay in progress, or obstacles in the implementation of major technical equipment in the process of localization, the responsibility of the relevant units and personnel will be investigated.
Diesel Fuel Oil Centrifugal Pump have two type: 1. self-priming Centrifugal Pump 2. high temperature centrifugal pump. CYZ self priming diesel fuel oil transfer centrifugal pump have 2-5 meters self suction. pump can be used to transfer flammable and explosive light fuel oil. RY high temperature diesel fuel oil centrifugal pump, pump have cast steel and stainless steel two kind of material, pump can bear 350 degree high temperature. diesel fuel oil transfer centrifugal pumps is easy to transfer light oil, it's no wear, low noise, smooth operation. it's good choice for unlubricating oil.
Diesel Fuel Oil Centrifugal Pump
Diesel Fuel Oil Centrifugal Pump,Diesel Oil Centrifugal Pump,Fuel Oil Centrifugal Pump,Electric Kerosene Oil Centrifugal Pump
Botou Honghai Pump Co.,Ltd , https://www.gearpump.nl