Classic design with heavy duty 10,500 lb winch . Powerful fast speed series would motor sealed ,mechanical design brake . sealed completed gear box with all steel gears , 265.2:1 gear ratio . steel cable and 4-way roller included . All -in-on remote control with the disassembled wire , two ends with airplane terminals ,waterproof .Reliable solenoid (450 A ,IP67 ) ,Separated control box .
Features and Specifications :
PN:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â XM-TE906
Performance:Â Â Â Â Â Â Â Â 12 V or 24 VÂ DC
Single line rated pull:Â Â 10,500lbs ( 4757kg)
Motor:             6.0hp/4.5kw series -wound Sealed
Braking action:Â Â Â Â Â Â Automatic locking with motor
Clutch:             Flip up and down  Sliding ring gear
Gear train :Â Â Â Â Â Â Â Â Â 3 -stage planetary
Gear ratio:Â Â Â Â Â Â Â Â Â Â 265.2: 1
Remote Switch:Â Â Â Â Â 12ft ,wireless remote control integrated with Wired remote control
Battery:Â Â Â Â Â Â Â Â Â Â Â Â Recommended:650CCA minimum for winching
Battery Leads:Â Â Â Â Â Â Â 2 Gauge 72"(1.83m)
Fairlead:Â Â Â Â Â Â Â Â Â Â Â 4-way roller fairlead
Steel cable:        Ф9.5 x 88 ft (Ф9.5 x 27 m )
Weight:            82 pound (37kg )
Overall dimension: Â Â Â 21.3" x 8.6" x 6.3" (550mm x 220mm x 160mm)
Mounting bolt pattern: Â 10" x 4.5" (254mm x 114.3mm)
Line Speed And Amp Draw ( First Layer )
| Line Pull | lb | NO | 4000 | 6000 | 8000 | 10500 | ||
| kg | LOAD | 1812 | 2718 | 3624 | 4757 | |||
| Line speed | ft/ min |
22.8 | 11.8 | 10.2 | 8.5 | 7.0 | ||
| m/ min |
6.95 | 3.6 | 3.1 | 2.6 | 2.13 | |||
| Motor current | Amps | 78 | 166 | 207 | 248 | 310 | ||
| Â | Â | Â | Â | Â | Â | Â | Â | Â |
| Layer of cable | Â | 1 | 2 | 3 | 4 |
| Rated line pull per layer | lb | 10500 | 8927 | 7250 | 5045 |
| kg | 4757 | 4497 | 3737 | Â Â 3191 | |
| Length of cable on drum | ft | 17.8 | 38.2 | 64.2 | 72 |
| m | 5.93 | 12.73 | 19.57 | 24.00 |
Â
Â
Â
Â
Â
Â
Classic design with heavy duty 10,500 lb winch . Powerful fast speed series would motor sealed ,mechanical design brake . sealed completed gear box with all steel gears , 265.2:1 gear ratio . steel cable and 4-way roller included . All -in-on remote control with the disassembled wire , two ends with airplane terminals ,waterproof .Reliable solenoid (450 A ,IP67 ) ,Separated control box .
Features and Specifications :
PN:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â XM-TE906
Performance:Â Â Â Â Â Â Â Â 12 V or 24 VÂ DC
Single line rated pull:Â Â 10,500lbs ( 4757kg)
Motor:             6.0hp/4.5kw series -wound Sealed
Braking action:Â Â Â Â Â Â Automatic locking with motor
Clutch:             Flip up and down  Sliding ring gear
Gear train :Â Â Â Â Â Â Â Â Â 3 -stage planetary
Gear ratio:Â Â Â Â Â Â Â Â Â Â 265.2: 1
Remote Switch:Â Â Â Â Â 12ft ,wireless remote control integrated with Wired remote control
Battery:Â Â Â Â Â Â Â Â Â Â Â Â Recommended:650CCA minimum for winching
Battery Leads:Â Â Â Â Â Â Â 2 Gauge 72"(1.83m)
Fairlead:Â Â Â Â Â Â Â Â Â Â Â 4-way roller fairlead
Steel cable:        Ф9.5 x 88 ft (Ф9.5 x 27 m )
Weight:            82 pound (37kg )
Overall dimension: Â Â Â 21.3" x 8.6" x 6.3" (550mm x 220mm x 160mm)
Mounting bolt pattern: Â 10" x 4.5" (254mm x 114.3mm)
Line Speed And Amp Draw ( First Layer )
| Line Pull | lb | NO | 4000 | 6000 | 8000 | 10500 | ||
| kg | LOAD | 1812 | 2718 | 3624 | 4757 | |||
| Line speed | ft/ min |
22.8 | 11.8 | 10.2 | 8.5 | 7.0 | ||
| m/ min |
6.95 | 3.6 | 3.1 | 2.6 | 2.13 | |||
| Motor current | Amps | 78 | 166 | 207 | 248 | 310 | ||
| Â | Â | Â | Â | Â | Â | Â | Â | Â |
| Layer of cable | Â | 1 | 2 | 3 | 4 |
| Rated line pull per layer | lb | 10500 | 8927 | 7250 | 5045 |
| kg | 4757 | 4497 | 3737 | Â Â 3191 | |
| Length of cable on drum | ft | 17.8 | 38.2 | 64.2 | 72 |
| m | 5.93 | 12.73 | 19.57 | 24.00 |
Â
Â
Â
Â
Â
Â
Deep Stamping Products, it can also be called Deep Metal Stamping Parts, Deep Processing Metal Stamping Parts, or Deep Processing Stamping Parts.
The die used for stamping is called a stamping die, or stamping dies for short. A die is a special tool that processes materials (metal or nonmetal) into the desired parts in bulk. A stamping die is very important in stamping, without meeting the requirements of a stamping die, batch stamping production is difficult to carry out; Without advanced stamping die, the advanced stamping process can not be realized. The stamping process and die, stamping equipment and stamping materials constitute the three elements of stamping processing, only they can be combined with each other to get stamping parts.
Stamping is a metal cold deformation processing method. Therefore, it is called cold stamping or sheet metal stamping or stamping for short. It is one of the main methods of metal plastic processing (or pressure processing), and it also belongs to material-forming engineering technology.
Dongjie can produce stamping parts according to your drawings. Dongjie has more than 1500+ sets of molds and has a professional technical and design team. We can meet your requirements as much as possible. You are welcome to come to consult your drawings.
Stamping Parts,Metal Stamping Parts,Drawing Metal Stamping Parts,Carbon Steel Metal Stamping Parts
Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com