Â
Brand:Â ASIDA
Model:Â XG5000
2. Usage
The machine use X-ray transmission principle, and make detection at the pictures of internal structure of the production.
The machine is widely used in battery, SMT, LED, electronic products manufacturing and casting processing industries.Customer can easily obtain image with high quality, high magnification and high resolution to effectively analyse the internal defects of product.
Â
3. Characteristic
Product performance:
Good stability of power supply with 90 KV X-ray tube.
The machine can detect small differences in density and gray with excellent image quality and high contrast.
Motion device equipped with ball screw and synchronous wheel, make the movement more smooth and steady.
Â
4. Function characteristics:
Ø Measurement: Measure the straight-line distance,circle-diameter, concentric circles, the distance between a point and center of a circle.
Ø Automatic navigation: Imaging system automatic moving to the target area and testing it if user click the mouse to any part of the image of a product.
Ø CNC functions: User can set the test path ,the machine automatic sorting NG product. It is convenient to the small batch and repeat testing.
Ø X-ray tube voltage and current can be adjusted according to actual requirements.Effective using time of X-ray tube can be checked online .
Ø Software can control imaging system in X, Y, Z axis movement and speed.
Ø Safety protection design, the fuselage photoelectric interlock. The machine immediately stop emission X -ray and get into a protection model if any a door open by misoperation.
Ø Keyboard shortcuts can be rapidly control the movement of the imaging system speed (high /medium s/low/) and the direction of the transformation.
 5. Testing Samples:
    Â
       
6.Technical parameters
| X-ray Tube | Tube Voltage | MAX 90KV |
| Tube Current | MAX 89uA | |
| Focal Spot Size | 5μm | |
| Cooling Mode | Strong wind cooling | |
| Image-forming  System | Field of View Range | 2"/4" |
| Resolution | 75/110lp/cm | |
| X-CCDÂ Resolution | 1392*1040pixels | |
| Geometrical magnification | 12-48X | |
| Loading platform | Standard size | 460mm X 410mm |
| Effective size | 400mm X 350mm | |
| loading weight | ≤5Kg | |
| Safety Standard | International Radiation Safety Standards | ≤1usv/hr |
U tube heat exchanger is suitable for the large temperature difference between tube side and shell side. The shell side media is easy to scale and needs cleaning, while the tube side media is clean and not easy to scale. It is also suitable for high temperature, high pressure, fluid corrosive working conditions.
Each heat exchange tube is bent into U-shape, the two ends are fixed in the upper and lower areas of the same Tube Sheet, and divided into two chambers of inlet and outlet with the partition in the tube box. This kind of heat exchanger completely eliminates the thermal stress, the structure is simpler than the floating type, but the tube side is not easy to clean.
The number of tubes is small, the utilization of the tube sheet is not frequent, and the shell side fluid is easy to short circuiting, which is unfavorable to heat transfer. If there is a leak or damage in the tube, the external U-tube can be replaced, while the broken inner tube can not be replaced, only plugged, and one broken U-tube means two broken, so the U-tube easily scrapped.
U Tube Heat Exchanger,Beu Heat Exchanger,U Type Heat Exchanger,U Tube Type Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jmheatexchanger.com