Workflow for installing monitoring equipment

Installing monitoring equipment is a top priority in building wireless video surveillance. Although the process seems simple, if the idea is not clear and you don't pay attention to the details, it will take extra time and effort. Therefore, you have a clear working idea. Very important, the following small series will tell you about the specific process of installing monitoring equipment.

Be prepared for installation:

First, personnel preparation, the general front end needs a group of two, the back end can be one. Need to prepare a walkie-talkie to facilitate communication and debugging.

Second, check whether the equipment is complete, and allocate the equipment to be installed according to the installation drawings. The type and size of the camera lens, the location of the switch, fiber optic transceiver, etc., must be matched one by one.

3. Prepare the necessary installation tools. If a worker wants to do something good, he must first use it. Cameras of different types require different tools. Bring these gadgets with small kits and prepare them for a smooth installation. For example, some cameras have very small screws and are very special. You have to change the small screwdriver or wrench and change the manual tool to a power tool. This will get twice the result with half the effort.

Check the circuit before installing the device and the signal is correct:

To ensure that the line connection is normal, first install the backend device, and transfer the communication device. Then install the camera. Be careful when installing the camera. Check whether the bracket is secure before installation, whether the connector inside the waterproof box is connected correctly, and whether the power connector is secure. Install the camera first in a relatively accurate direction. (If the installation environment is complicated, you can use the engineering treasure to directly adjust the direction of the lens). Wait until all cameras are installed. Before the system is powered on, check it again to see if it is missing. If it is safe, you can power it on.

Equipment commissioning:

Debugging is a very simple task, but if it is not in place, it will bring trouble to future maintenance. Image out is the most basic requirement, so be sure to organize and record the data. For example, the network monitoring system must record the IP address of each camera. The IP address is a continuous value; each camera has a name. Use the table to map the camera name, IP address, and camera location one by one. In this way, if there is a problem with the monitoring, it will save a lot of time to find which camera has a problem, regardless of where the camera is. Just look at the form and you will understand.

Monitoring device installation seems to be a very simple matter, but if you don't have experience or you don't know what to think, it will waste a lot of time.

Based on 13 years of wireless monitoring industry experience, Tengyuan Zhituo has many wireless monitoring application cases in various industries. We will develop targeted control and construction solutions for customers according to the site environment, and recommend suitable wireless monitoring equipment. Please contact our customer service staff for details.