Throttle Assembly Car Valve Body Automobile Sensor Car Parts Mk07-043 Chery Tiger 2.0 Mitsubishi 4G63

Model NO.: MK07-043
Certification: TS16949, ISO9001, CE, CCC
Type: Sedan
Adjustable Air Inlet: DSI Inlet
Supersonic Inlet: External Pressure
Shock Wave Number: 3 Wave
Main Market: Middle East
Trademark: MIKEY
Transport Package: Box
Specification: 18*16*14/1035g
Origin: China
Throttle is a ke fashion control valve that controls air into the engine, when the gas enters the kiln and the gasoline is mixed into a flammable hun he qi, it burns to form a work. It gets air filter, next engine block, called the throat of a car engine.
Classification:
There are two kinds of traditional cable and electronic throttle, the traditional engine throttle manipulator is connected to the throttle pedal by cable (soft wire) or rod, at one end, the other end connects the throttle board to work. In order to control the opening angle of throttle, electronic is mainly adopted by throttle position sensor, thus regulate the size of the intake.
Name: throttle valve assembly
Product Number: MK07-043
Adapter models:  Chery tiger 2.0 mitsubishi 4G63
Wang Wei:  China



You can add my company public Throttle Assembly Car Valve Body Automobile Sensor Car Parts Mk07-043 Chery Tiger 2.0 Mitsubishi 4G63: 13711793293. For more direct understanding of product information.
My (Whatap)ID:008613711793293



Throttle Assembly Car Valve Body Automobile Sensor Car Parts Mk07-043 Chery Tiger 2.0 Mitsubishi 4G63


































 

Plastic car exterior parts refer to front and rear bumper moulds, fog lamp moulds, and grilles and all plastic accessories, are requesting high quality with hardened steel 1.2738 or Finkl P20 hard steel in order to guarantee specified mould life such as 1000000shots. Plastic injection material is PP or ABS as per customer's requirement. Ceeto company has skilled design engineering team who is able to design plastic car bumper moulds as per part geometry, bumper mould design will be first considered hidden parting line or visible parting line according to DFM analysis and moldflow report.


Car bumper mould making factory


Cnc Workshop to make car bumper mould


Technical information for Car front bumper and rear bumper mould


  1. Design software: Pro-E
  2. Mould cavity: single cavity
  3. Molding material: PP, ABS, PE
  4. Mould cavity and core steel: 1.2738, P20, P20HH, 718H
  5. Hot runner system: Synventive, Yudo, HRS, Moldmaster
  6. Ejection system: Ejector pins, angle lifters
  7. Leadtime: 120 days
  8. Mould life: 500000 shots to 1000000 shots
  9. Mould packing: wooden box


Car bumper mould CNC milling


Ceeto Service Scope to manufacture car bumper mould


  1. Plastic bumper product DFM analysis
  2. Moldflow analysis
  3. Plastic car bumper mould design
  4. Plastic car bumper mould assembly drawing
  5. Plastic car bumper mould machining
  6. Plastic car bumper mould testing via injection molding machine
  7. Plastic car bumper mould packing
  8. Plastic car bumper samples packing
  9. Mould spare parts preparation
  10. We also support you for prototype mould design and manufacture


Plastic car bumper mould


Plastic Car Front Bumper and rear bumper mould test


Before we ship bumper mould to you, we will have bumper mould buy-off in house together with you, and we must make official at least three mould tryouts and 2000 empty cycle for mould to check if mould function is ok in a certain time.


Plastic bumper mould test on machine



Normally, you and we attend the validation procedure together and sign off after checking. What we are checking usually are as follows:

  1. Compatibility with Injection Machine to be used
  2. Is size of the mould ( Leight* width* Height ) correct?
  3. Is weight of the mould is correct?
  4. Are lifting eyebolts fully seated on the mold and not interfering with mold action?
  5. Are all transportation bars installed and in correct color as you request?
  6. Are knock-out holes for mechanical ejection and the layout correct as designed?
  7. Is electric box wired correctly as per injection machine standard?
  8. Are dimensions of locating ring correct?
  9. Is radius and orifice diameter of sprue bush correct?
  10. Are clamping features correct?
  11. Is the mold construction compatible with robot gripping if applicable to take off part?

Plastic bumper mould for car



Plastic car bumper mould material and heat treatment


What we will also inspect mould material and heart treatment as follows:


  1. Is any welding used on mold? Is welding process correct for the steel used?
  2. Have all mold plates been stamped with markings?
  3. Provide the heat treatment certificate and hardness for all applicable mold components
  4. Are moving parts nitrided? Provide nitride certificate.


We warmly welcome you to visit us and send us RFQ, we want to be your part of suppliers and we will do our utmost efforts to make high quality of moulds and products, if you have any doubts about technical points, please don't hesitate to let us know, we are looking forward to hearing from you, thanks a lot.


Automotive Exterior Plastic Injection Mould

Automotive Exterior Plastic Injection Mould,Injection Molding Automotive Parts,Plastic Car Front Bumper,Plastic Car Rear Bumper

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com

Posted on