Our company

YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD
Founded in 1998, YUELON is privately held which is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems.
Precision induction heating solutions are our specialty. Using induction heating to improve the efficiency and effectiveness for industrial heating process, and they are used for application such as brazing, annealing, quenching, forging, melting, shrink fitting etc.
Our induction heating machine are Available from 3KW to 1500KW deliverable output power with 0.5KHZ to 1.1MHZ operating frequency range.
All our products are divided into four major series according to the frequency:
Medium frequency series (abbr. MF series): 0.2-20KHZ
High frequency series (abbr. HF series): 30-100KHZ
Super audio frequency series (abbr. SF series): 8-40KHZ
Ultrahigh frequency series (abbr. UF series) : 100-1000KH
Our induction heating equipment are 100% solid state design for unsurpassed reliability, advanced technology with highest quality standards as well as very high performance to make continuously working at maximum power.

Main product

Induction Hardening Machine Applications
A.External circular quenching series, for all kinds of shaft, rods, tubes, circular parts,such as bearings, valve, whole or local quenching of outside round surface.
B.Plane quenching series, the end of the mechanical parts and plane parts of the whole or local quenching,such as machine slide way, linear slide rail.
C.Alien parts quenching series, heterogeneous parts surface integral or local quenching,such as car crankshafts, camshaft.
D.Internal quenching series,for all kinds of tubes, mechanical parts inside circles whole or local quenching,such as cylinder liner,bushings.

Product parameter

Main characteristics

1. IGBT module and inverting technologies,higher reliability and lower maintenance cost;
2. 100%duty cycle,continuous working is allowed at maximum power output;
3. constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
4. Display of heating power and heating current and oscillating frequency;
5. multi-display functions,with displays of over current,over voltage,water failure,phase failure and unfit lad and so on,machine can be protected from destroys and machines can be repaired easily.
6. Simple to install,installation can be done by unprofessional person very easily,connection water and power can be finished in a few minutes.
7. Light weight,small size.
8. Different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer:the power and the operating time of the heating period and retain period can be preset respectively,to realize a simple heating curve,this model is suggested to use for batch production to improve the repeat ability.
10. The separated models are designed to fit the dirty surroundings,the generator can be put in a clean space to increase the reliability;with the small size and light weight of the separated transformer,it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

 

Our service

1. Pre-sale service:
1.1 recommend the most suitable machine for customers, according to their application details. 
1.2. Inquiry and consulting support. 
1.3. Sample testing support. 
1.4. View our Factory.
2. In-sale service:
2.1. Strictly control all the production process
2.2. Take run test, according to relevant equipment test run regulations.
2.3. Strictly inspection the machine, before delivery
2.4. Delivery on time.
3. After-sale service:
3.1. 12 months warranty period
3.2. Within one year free warranty, any fault caused by non-artificial reason, any quality problems such as design,manufacture,or procedure occurs,we will provide replacement  parts after detecting the faults.
3.3. If any big quality problems occurs during the guarantee period, we will send maintenance
3.4. technician to provide visiting service after checking with the customer and charge for a favorable price. 
3.5. We provide a lifetime favorable price to the buyer with the materials and spare parts used in system operation, equipment maintenance.
3.6. The above mentioned are only basic after-sale service requirements, we will make more promises related to quality assurance and operation guarantee mechanism.

Packing & shipping

 

Customer Inspection

 

Certifications

 

FAQ

1,what is your advantage compared to others?
our system has excellent reliability 100% solid state design advanced technology,the highest quality standards as well as high performance continuous working at maximum power.besides,we have owned dozens of agents all over the world,which is attracted by our humanized design,thoughtful after-sell's service,excellent quality and so on

2,If our machine meets fault, how could you help us to solve it?
Dear customer,We have professional engineers team which is preparing for after-sale and install service in 24 hours.first of all,before shipping,?We will checking the machine's condition over and over again,second of all,if it meets fault after installation,The detailed fault description and photos should be informed to us.Our engineer will judge which part meets trouble,then providing advises and accessories list you need. If some problems can not be solved through communication,the engineer will be dispatched to debug on site according to your requirement.YUELON puts quality on our first position.

3. what is your warranty?
Our all machines' standard warranty is 12 months from the date of signing the turning over document after commission.
 

Our company

YONGKANG YUELON ELECTRONIC EQUIPMENT CO.,LTD
Founded in 1998, YUELON is privately held which is specialized in researching and manufacturing of solid-state medium to ultrahigh frequency induction heating equipment and systems.
Precision induction heating solutions are our specialty. Using induction heating to improve the efficiency and effectiveness for industrial heating process, and they are used for application such as brazing, annealing, quenching, forging, melting, shrink fitting etc.
Our induction heating machine are Available from 3KW to 1500KW deliverable output power with 0.5KHZ to 1.1MHZ operating frequency range.
All our products are divided into four major series according to the frequency:
Medium frequency series (abbr. MF series): 0.2-20KHZ
High frequency series (abbr. HF series): 30-100KHZ
Super audio frequency series (abbr. SF series): 8-40KHZ
Ultrahigh frequency series (abbr. UF series) : 100-1000KH
Our induction heating equipment are 100% solid state design for unsurpassed reliability, advanced technology with highest quality standards as well as very high performance to make continuously working at maximum power.

Main product

Induction Hardening Machine Applications
A.External circular quenching series, for all kinds of shaft, rods, tubes, circular parts,such as bearings, valve, whole or local quenching of outside round surface.
B.Plane quenching series, the end of the mechanical parts and plane parts of the whole or local quenching,such as machine slide way, linear slide rail.
C.Alien parts quenching series, heterogeneous parts surface integral or local quenching,such as car crankshafts, camshaft.
D.Internal quenching series,for all kinds of tubes, mechanical parts inside circles whole or local quenching,such as cylinder liner,bushings.

Product parameter

Main characteristics

1. IGBT module and inverting technologies,higher reliability and lower maintenance cost;
2. 100%duty cycle,continuous working is allowed at maximum power output;
3. constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
4. Display of heating power and heating current and oscillating frequency;
5. multi-display functions,with displays of over current,over voltage,water failure,phase failure and unfit lad and so on,machine can be protected from destroys and machines can be repaired easily.
6. Simple to install,installation can be done by unprofessional person very easily,connection water and power can be finished in a few minutes.
7. Light weight,small size.
8. Different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer:the power and the operating time of the heating period and retain period can be preset respectively,to realize a simple heating curve,this model is suggested to use for batch production to improve the repeat ability.
10. The separated models are designed to fit the dirty surroundings,the generator can be put in a clean space to increase the reliability;with the small size and light weight of the separated transformer,it is convenient to use in the production line and easily assembled inside the machinery or moved mechanism.

 

Our service

1. Pre-sale service:
1.1 recommend the most suitable machine for customers, according to their application details. 
1.2. Inquiry and consulting support. 
1.3. Sample testing support. 
1.4. View our Factory.
2. In-sale service:
2.1. Strictly control all the production process
2.2. Take run test, according to relevant equipment test run regulations.
2.3. Strictly inspection the machine, before delivery
2.4. Delivery on time.
3. After-sale service:
3.1. 12 months warranty period
3.2. Within one year free warranty, any fault caused by non-artificial reason, any quality probleSteel Tube Cutting Machine

Gantry double plasma CNC cutting machine is a stereotyped product carefully developed by our company. It has high processing efficiency and is 2.2 times of single gun cutting. It is a numerical control equipment for metal sheet blanking. It not only has an appearance atmosphere, but also has stable operation, high work efficiency and long service life. It can realize cutting of any metal material according to any pattern. It is widely used in the cutting of sheet metal in various mechanical manufacture industry.

Features

Servo drive, high control precision, stable moment frequency characteristics, strong overload capability and fast response.

The numerical control and drive adopt modular integrated design, and the buttons and the chassis are completely shielded from all steel structures, preventing electromagnetic radiation and anti-static.

Double gun operation reduces labor costs by 50%.

Transportation and material costs are reduced by 10%.

High processing efficiency, 2.2 times that of single shot cutting.

Optional capacitor or plasma automatic height adjustment system to effectively avoid plate deformation wave deformation collision.

Imported electrical appliances, stable performance, anti-interference and long life.

Tube Cutting Machine,Steel Tube Cutting Machine,Steel Laser Cutting Machine,Steel Pipe Cutter

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachines.com