Shenzhen man was drowned when he was ready to leave the hospital

Shenzhen man was killed when he was ready to go to hospital, said the pear was killed by a diesel generator | diesel generator price / 2012-06-20

The 48-year-old man from Hunan Province, Wang Liangshou, was recently admitted to Longhua Longji Hospital because of heart-beating. When he was ready to leave the hospital on the afternoon of June 13th, he suddenly suffered abnormal facial expression after being fed two pears. He was later rescued by the hospital. Invalid died. Longji Hospital explained that Wang Liangshou died because of pear suffocation, but family members refused to accept this argument from the hospital.
Families questioned the death of a hospital
According to the families of the deceased, Wang Liangshou was admitted to Longhua Longji Hospital because of a delay in the afternoon of June 6. After receiving a week of treatment, the patient's condition and mental state have some relief. As soon as the hospital informed the patient that he was preparing to leave the hospital, he did not expect a sudden tragedy. According to family members' recollections, on June 13, Wang Liangshou started sweating after he had finished using the medicine after lunch. The explanation given by the doctor was due to the hot weather and the patient’s physical deficiency. At 6 o’clock in the evening, his family members He began to feed Wang Liangshou and ate pears. As a result, when the third piece was eaten, the family members discovered that Wang Liangshou suddenly faced an anomaly, and rushed to the doctor.
“At that time, the doctor said that the emergency needed emergency treatment, but he did not transfer the patient to the emergency room. Instead, after performing chest compressions for almost an hour in the bed, several doctors left the ward and left only a few nurses. At the scene, chest compressions were performed. We ran to the hospital office to request the doctors to continue the rescue. But they said that they had done their best!” The family members believed that Wang Liangshou was still showing signs of life. However, the doctors left the rescue site irresponsibly. This made them Can not accept.
Family members told reporters that afterwards they strongly demanded that the hospital give an account of Wang Liangshou’s death. “But by the afternoon of June 14, Longji Hospital concluded that the patient died of pear suffocation after eating pears. This makes us feel ridiculous. We have never heard that if we grow up, we will never hear that eating pears will die!” The family members said that they refused to accept this conclusion reached by Longji Hospital, and according to their memories, they accepted in Wang Liangshou. Within a week of the treatment, the doctor of Longji Hospital had two mistakes before and after: Once on the second day of hospital admission, the family members found a doctor in the medical history diagnosis sheet of Wang Liangshou and found a colleague in the same room. Another patient’s cardiac diagnosis book was explained by the doctor as a possible negligence of the nurse; the second time was on the morning of June 12th. After Wang Liangshou had taken a CT scan of her abdomen, the family members looked at the examination report and found the CT report above. Actually write someone else's name. “From these low-level mistakes, we can see that Longji Hospital has no sense of responsibility and sloppy work for patients. This work attitude is not conducive to the treatment of patients!” Family members even believe that Wang Liangshou’s death does not rule out the hospital’s Misdiagnosis related.
The hospital emphasized no fault
In response to reports from family members, the Shenzhen Commercial Daily reporter found the verification situation in Longji Hospital and obtained a “Note on the condition of the deceased Wang Liangshou”, which mentioned “At 18:08 on the night of June 13, 2012, the nurse visited. The ward found the patient lying in bed with loss of consciousness and facial cyanosis. At this time, the family of the patient pulled out a piece of Sydney about 3×4cm from the patient’s mouth. Afterwards, the patient asked if they had already fed two pills. When the third pill was eaten, an accident occurred. Pneumoconiosis was also inhaled during endotracheal intubation. Physicians on duty were patrolled to inform doctors and related medical personnel and experts to come to the rescue. The patients were asked to take pears in bed and cause foreign body suffocation, causing respiratory arrest, cardiac arrest, and immediate cardiopulmonary resuscitation. After surgery and first aid medication, the patient was rescued until 19:50. The electrocardiogram was always in a straight line, with no vital signs and clinical death.
Huang Ji, chief of Longji Hospital's medical department, further explained that the case of drowning caused by eating pears had previously happened in Shenzhen. Before the incident, Wang Liangshou was recovering from his illness and he was discharged after he had eaten his pear. "If you do not eat pears, you have basically decided to be discharged!" Huang Kechang said that because Wang Liangshou's death was not due to a medical accident, Longji Hospital had no responsibility in this process, so their hospital refused to accept family members. The claim for compensation was submitted and it was agreed that it should conduct medical and judicial identification through a third party.
Next:Installation, use and regulation of marine diesel generator sets
Prev:The 70th Weng Wish to sell the house for the wife to cure the disease spend 10 yuan to buy Fucai in the 5.76 million emergency

Weld Materials

1.Welding materials

In Welding, substances called filler materials or consumables are used. As the name implies, these substances provide filler or a body of molten materials that provides a strong bond to be formed between the base metals used. Most welding processes will also require some form of shielding to protect both the main components and filler from being oxidized during the process.


The type of welding materials used during welding depends on the nature of the job intended. Electrodes draw the necessary energy in order to perform welding applications. Luoyang Golden Egret Company has any kind of welding materials include CTC Welding Rod /rope, SCTC welding rod/rope, TC electronic welding rod, Ni-based welding rod, flux-cored Welding Wires, solid welding wires and etc.

Welding can be applied in different kinds of industries such as building and construction, oil and gas, marine, power generation, steel, mine tools, automobile, transportation and etc.


2. Welding rod

1)Cast tungsten carbide based tubular rod

The hard phase of the rod is cast tungsten carbide which leads to higher hardness and better wear-resistance.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65

Mainly used for Mining machinery, Geological tools, Petroleum drilling tools etc, by Oxy-Acetylene with weak carburizing flame.

Ni Based Welding Rod


Product recommendation:

GT1103 (CTC, 60-80 mesh),

GT1103-1(CTC, 20-30 um),

GT1103-2(CTC, 40-60 um)

2)The hard phase of tube rod is carbide pellets which leads to higher impact resistance and better wear resistance than CTC cloase rod.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65 wear test.

Mainly used for mining machinery. Geological tools etc; by Oxy-acetylene with weak carburizing flame.

Product recommendation:

GT2102 (Cemented carbide grit, 30-60mesh)

GT2102-2(Cemented carbide grit, 30-40mesh)

GT2102-3(Cemented carbide grit, 40-60mesh)

3)Tube rod is composited by Cemented carbide pellets, Spherical CTC and CTC. The layer has higher impact resistance, better wear resistance and good fluidity than other rods.

Wear resistance: the wear resistance is 6-7 times better than others. Tested by ASTM G65.

Mainly used for oil method drill bits, such as Tri-cone bit, Steel tooth bit, PDC bit, etc. By Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT3302 (carbide pellets, 20-40mesh)

GT3302-1(carbide pellets, 14-40um)

4)The hard phase of the rod is monocrystal WC, the welding layer has a higher wear resistance and better impact resistance.

The wear resistance is 6-7 times better than others, tested by ASTM G65 method.

Mainly used for the repair and strength for oil drills bits, such as PDC bit diameter holding by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GT4104 (Monocrystal WC, 80-200mesh)

3. Welding Rope

Made form mixture of CTC and self-fluxing nickel alloy covering on nickel wire. The CTC is in spherical or irregular with good wear resistance; the nickel alloy is in spherical or nearly spherical shape with good wettability and erosion resistance and better corrosion resistance than tubular rod.

Recommend to use Petroleum drilling tools, Concrete mixing blade, Mud pump, Coal sluice, Coal drill pipe, Tunnel drilling machinery etc.

By Oxy-Acetylene Welding with weak carburizing flame.

5mm Welding Rope

Product recommendation:

GS110450N (CTC, 4mm, HRC 47-55)

GS110550N (CTC, 5mm, HRC 47-55)

GS110650N (CTC, 6mm, HRC 47-55)

4. Welding Bar

The rod is sintered by CTC and Ni-based powders. The CTC(Cast Tungsten Carbide) is in irregular or spherical shape with better wear resistance and the nickel alloy is in spherical or nearly spherical shape and has good wettability with cast tungsten carbide. The cladding layer has a higher impact resistance and better wear resistance.

Its wear resistance and corrosion resistance is between tube rod and flexible rope.

Mainly used on the Steel PDC bit, Concrete mixer blade, Mud pump, Miner chute, Miner drill stem and Mechanical parts of Tunnel rock drill machine etc.

Welded by Oxy-Acetylene with weak carburizing flame.

Product recommendation:

GD4025253-3(CTC, SCTC, 4*600/6*600)

GD4030303-3(CTC, SCTC, 4*600/6*600)

5. Welding wire

Intensified molybdenum titanium vanadium composite chromium carbide welding wire can improve layer`s bonding strength and tenacity. This wire can use for multilayer welding which has no peel off, and it can maintain good wear resistance under certain impact working condition.

Product recommendation:GSQD671Mo-4(1.6mm)

Medium carbon and high chromium wear resistance welding wire has a higher hardness, stronger wear resistance, and excellent toughness by adding a certain amount of molybdenum alloys and boride. It has a better impact resistance and strip resistance than high chromium cast iron type materials

Product recommendation: GSQD621Mo-4(1.6mm)

6. Tungsten Carbide Pellets

With high sphericity & excellent alloy organization, cemented carbide pellet is mainly used in welding, as an adding material of PTA Powder , tubular welding rod, to improve the wear resistance of the workpieces greatly.

Product recommendation: GQ06


Wc 6co Tungsten Carbide Pellets


7. Tungsten Carbide Grits

Cemented carbide grit with different percent of cobalt has good abrasive resistance and is widely used for making grinding, polishing and cutting tools.

Product recommendation: GS08A


Wc 8co Tunsgten Carbide Grits




Weld Materials,Tubular Welding Rod,Welding Electrodes,Stainless Steel Welding Rod

Luoyang Golden Egret Geotools Co., Ltd , https://www.lygoldentool.com

Posted on