Model NO.: PD-AP
Principle: Volumetric Meter
Medium Pressure: General Water Meter
Work Environment: Wet Water Meter
Stucture: Traditional
Material: Plastic
Type: Volumetric Rotary Piston Type
Size: 15mm-50mm
Temperature: 0 Degrees Celsius to 50 Degrees Celsius
Working Pressure: 16 Bar
Dial Reading: 0.02L to 99999 Cubic Meter
Pressure Loss: 63
Connecting Standard: Bsp & NPT
Trademark: Aimei
Specification: Export Standard
Origin: China
HS Code: 9028201000
Volumetric Rotary Piston Water MeterIt is a volumetric rotary piston water meter for residentialÂ
application in sizes 15mm-40mm for cold meter.
Features
Ensures high sensitivity and accurate registration throughout a wide flow range Â
Mechanical transmission movement equates to maximum reliability. Â
Corrosion resistant body
Liquid sealed register, easy reading and long time clear reading
Low starting flow rate.
Internal non return valve, internal strainer
Install in any position
Plastic meter body
Standards ComplianceÂ
Directive 2004/22/EC on measuring instruments;Â
the European  Standard EN14154+A1+A2: Water Meter;Â
the International  Organization of Legal Metrology OIML R-49: 2006(E)
Optional FeaturesÂ
Several lengths and connections available on request
Non return Valve
Reed switch option
Working Conditions
Water temperature: ≤50ºC for cold water meter Â
Water pressure:   ≤1MPa or 1.6MPa optional
                 (10bar or 16bar option)
Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
Installation requirements
The meter should be installed in horizontal position with the direction of the flow asÂ
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
Â
| DN(mm) | 15 | 20 | |||||
| Size(inch) | 1/2" | 3/4" | |||||
| Q4(m³/h) | 3.125 | 5 | |||||
| Q3(m³/h) | 2.5 | 4 | |||||
| R160 | Q2(l/h) | 22.5 | 40 | ||||
| Q1(l/h) | 15.62 | 25 | |||||
| R200 | Q2(l/h) | 20 | 32 | ||||
| Q1(l/h) | 12.5 | 20 | |||||
| Max.Reading (m³) | 9999 | ||||||
| Min.Reading (Liter) | 0.02 | ||||||
| Max.Pressure (bar) | 16 | ||||||
| Pressure Loss (ΔP) | 63 | ||||||
| Max.Temperature | T30 or T50 | ||||||
| Pulse Output Option | Vmax=24V,Imax=100mA,Pmax=2W |
||||||
Bolt Bonnet Globe Valve with ASME, DIN, GOST or EN standard is the best popular type shut off and regulating valve in any kind of low pressure industrial pipelines, Class 150(PN16) to Class600(PN100) matching valve size from 2"(DN50) to 20[(DN500), which can be operated by electric actuator or handwheel. Bolt bonnet Globe Valve normally with flange ends connection with industrial pipeline as well as welding ends. Valve material can be carbon steel, stainless steel, alloy steel or special steel according the requirements of the working medium.
Bolt Bonnet Globe Valve
Bolt Bonnet Globe Valve,Low Pressure Globe Valve,Flanged Globe Valve,Cast Steel Globe Valve
Yongjia South Trading Co.,Ltd , https://www.n-lvalve.com