Marine Ship Yokohama Type Pneumatic Rubber Fender 0.05mpa
1. General introduction
ISO17357:2014 Floating pneumatic rubber fender is an anti-clossion device for marine application in the world. It is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the sea surface and work as a shock absorber when ship to ship transfer operation and ship to dock berthing and mooring operations.
Evergreen floating pneumatic rubber fenders fully company with all requirements on ISO17357:2002 Sstandard. Our products are certificated by CCS, DNV, GL, LR and BV.
 2.  Construction  features
The basic body construction of  Floating pneumatic rubber fender consists of outer rubber layers, synthetic-tire-cord layers and inner layers. Please take the picture for reference.
All of these layers are vulcanized together ,and then compress air  inside to enable the fender to float on the sea surface.Â
 3.  Specification and Performance
| DiameterxLength (mm) |
Initial internal pressure(kPa) | Energy(kj) | Reaction(kN) | Hull pressue(kPa) |
| 500x1000 | 50 | 6 | 64 | 132 |
| 600x1000 | 50 | 8 | 74 | 126 |
| 700x1500 | 50 | 17 | 137 | 135 |
| 1000x1500 | 50 | 32 | 182 | 122 |
| 1000x2000 | 50 | 45 | 257 | 132 |
| 1200x2000 | 50 | 63 | 297 | 126 |
| 1350x2500 | 50 | 102 | 427 | 130 |
| 1500x3000 | 50 | 153 | 579 | 132 |
| 1700x3000 | 50 | 191 | 639 | 128 |
| 2000x3500 | 50 | 308 | 875 | 128 |
| 2500x4000 | 50 | 663 | 1381 | 137 |
| 2500x5500 | 50 | 943 | 2019 | 148 |
| 3300x4500 | 50 | 1175 | 1884 | 130 |
| 3300x6500 | 50 | 1814 | 3015 | 146 |
| 4500x9000 | 50 | 4752 | 5747 | 146 |
Yokohama Pneumatic rubber fender are available from 500X1000mm to 3300X6500mm, including all the standard and no-standard specifications.
Details:
   
4.Pressure requirements of Yokohama type Pneumatic Rubber Fenders -
Evergreen-Maritime manufactures marine rubber fender with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO17357:2002.
Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.Â
Â
Contact manufacturer directly for more details !
Marketing Manager:Â Â Â Â Aimee Sun
 Email: aimee.sun(at)evergreen-maritime.com
Tel/whatsapp: 0086 17663929266
Steel Wire Winding Hydraulic Rubber Hose
High pressure hose steel wire braided hose steel wire wound hose
High pressure steel wire wound reinforcement rubber Hydraulic hose/ Temperature Oil Resistant Steel Wire
Main uses: suitable for conveying hydraulic fluid such as alcohol, hydraulic oil, fuel oil, lubricating oil,
Reinforcement:2 ~ 6 plies.
Cover:synthetic rubber resistant to oils,abrasion and weather.
Applications:General hydraulic fluids,crude oil,fuel and lubeicating oil.
Operating Temperature:-40C ~ +100C
Product Standard: Rubber Hose Pipe is Q/XXC058
Our Products Range:
1. Hydraulic Hose
Steel wire braided hose, Steel wire spiral hose, Texible braided hose
2. Industrial Hose:
Smooth(Wrapped) Air/Water/Oil/Gas/Lpg hose, Welding hose, Oxygen hose, Acetylene hose,
Lpg hose/Propane hose, Twin hose, Oil/Water suction and discharge hose, Steam hose, Sandblast hose,
Large diameter hose etc.
3. Automotive Hose
Air brake / condition hose, Power steering hose, Fuel Oil Hose,
4. PVC Hose
5. Hose Fitting / Coupling / Ferrule
6. Hose Machine
Steel Wire Winding Hydraulic Rubber Hose,Wire Wound Hydraulic Hose,Steel Wire Braided Hose Pipe,Steel Wire Wound Reinforced Flexible Pipe
Shaanxi Yanchang Petroleum Northwest Rubber Flexible Pipe Co., Ltd. , https://www.cnrtp.com