The maintenance of the mixer driving device The function of the driving device is to drive the rotation of the concrete tank. It consists of a power take-off device, a cardan shaft, a hydraulic pump, a hydraulic motor, a control valve, a hydraulic oil tank and a cooling device. If this part stops working because of a fault, the concrete tank will not be able to turn, which will lead to the scrapping of the concrete in the vehicle, and even cause the concrete of the whole tank to condense in the tank, causing the concrete mixer truck to be scrapped. Therefore, whether the driving device is reliable is a problem that must be highly regarded in use. In order to ensure that the drive is sound and reliable, the following maintenance work should be done:
1. The universal rotating part is a part with frequent faults. Grease should be added on time, and the wear condition should be checked frequently and repaired and replaced in time. The team should have a spare universal shaft assembly to ensure that it can resume work within tens of minutes in the event of a failure.
two. Keep the hydraulic oil clean. The poor working environment of concrete mixer trucks must prevent dirt and cement from entering the hydraulic system. Hydraulic oil should be replaced regularly as required by the user manual. Once the hydraulic oil is found mixed with water or sand during inspection, the hydraulic system must be shut down immediately to replace the hydraulic oil.
three. Ensure that the hydraulic oil cooling device is effective. It is necessary to regularly clean up the hydraulic oil radiator to prevent the radiator from being blocked by the cement, check whether the radiator electric fan is running normally, and prevent the hydraulic oil temperature from exceeding the standard. Hydraulic pressure as long as the hydraulic oil to ensure that the general failure is not much; but different manufacturers, the service life is not the same.
Xiagong Chusheng Special Purpose Vehicle Co., Ltd. is a professional manufacturer of all kinds of special vehicles produced by the National Development and Reform Commission. It is a large-scale special-purpose automobile manufacturer. Its leading varieties include sprinkler series, suction dung (suck) series, garbage truck series, and sweeper vehicles. Series, tank refuelling vehicle series, aerial working vehicle series, truck crane series, fire truck series, cement mixer series, wrecker series... If you need to purchase a car, please call the sales hotline (Manager Wang)
Pool & Spa test strips 6 in 1. Get following 6 parameters: total hardness, free chlorine, total chlorine, cyanuric acid, total alkalinity and pH within 30 seconds.
Urea, also known as carbamide, is an organic compound composed of carbon, nitrogen, oxygen and hydrogen. It is one of the important standards to measure the water quality of swimming pools. In swimming pool water, sweat and urine discharge will increase the content of urea in the water, which affects the water quality. Through the test of urea test paper, the balance of urea value can be maintained, to avoid ammonia in urea and chlorine-containing disinfectant in water reaction, the formation of chloramines, so as to protect the health and safety of swimmers. The urea content in pool water should be less than or equal to 3.5 mg/l (national standard).
Spa Test Strips,Pool Test Strip 7Way,5Way Pool Test Strips,Pools Water Test Strips
Jilin Test Bio-Electron Co., Ltd , https://www.tst-check.com