KCB5400 Big Capacity Electric Fuel Transfer Gear Pump

Aplication:
This series pump applies to delivering non-corrosive lubricating-oil or equivalent liquid without solid particles and fibres at temperature below 300 centigrade and with the viscosity of 5-1500cst.

Application Scope:
It can give performance as transferpump or booster pump in oil delivery system. It can be also applied as a fuel pump for delivery system, pressurization and injection in fuel supply system and in all industry fields as lubricating pump.

Structure Features:
KCB series gear pumps are mainly composed of gears, axles pump body, pump, cap safety valve and axle-end seals etc. The heattreated gears have the advantage of higher hardness and intensity, and rotate with the axles inside the replaceable bearing sleeves. All of pump's parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute, which lets the gears bear the least torque force and reduces load and wear on bearings bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.
It is also designed with safety valve for protection against overload. The full return flow pressure of the safety valve is 1.5times higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances.
But please note the safety valve can't be applied as pressure-reducing valve for long time. You may install pressure-reducing valve separately on pipe-line if needed.

Technical Paramter:
Flow: 1.1m3/h~570m3/h
Discharge pressure: 0.28Mpa~1.45Mpa
Speed: 720rpm~2900rpm
Dia of inlet & outlet: 3/4"~350mm

 

BMW Carbon Fiber Hood

With the increasing demand for lightweight in the automotive industry, carbon fiber has gradually been tried and applied in traditional vehicles and new energy vehicles. Carbon fiber composites were first used in high-end sports cars and luxury car models in the automotive field. Since BMW took the lead in applying carbon fiber composites to mass production models such as i3 and i8, the global automotive design and manufacturing industry has set off an upsurge of research and application of carbon fiber composites.

As the largest automobile production and marketing country in the world, China's automobile colleagues have been calm in the research and development of carbon fiber composites. Up to now, the real mass production application is still lacking. Except that Qiantu Automobile, a new force of car making, has used carbon fiber composite body outer covering extensively in its first model K50, almost no complete vehicle enterprise uses this very advanced material for mass production models.

Bmw Carbon Fiber Hood,Carbon Fiber Car Spoiler,Performance Carbon Fiber Hood,Good Carbon Fiber Hood

Dongguan Ludi Automobile Technology Co., Ltd , https://www.ludirefitted.com