China Automotive Network Road Sweeper Columns Listed by the Ministry of Industry and Information Technology of China Road Sweeper Vehicles Announcement All 6 Categories 111 Manufacturers 98 Road Sweeper Brands 770 Sweeper Products, Latest Road Sweeper Announcement, Environmental Notices , fuel announcements, exemption announcements, pictures, news, and the most timely information on prices of road sweepers.
Description Jianghuai Road Vehicle garbage bin volume of 3.5 cubic meters, the clean water tank capacity of 1 cubic meter, the use of Jiangling Deputy Engine, vehicle operation efficiency.
Performance characteristics â—† Control box in the cab, the system of electrical centralized control, easy to operate. â—† The four-sweep plate is combined with a suction nozzle to perform suction and suction. The suction and suction capability is excellent, and the swash plate has anti-collision function. â—† Both sides can work at the same time, but also can work independently on one side â—† Cleaning device mechanism is simple and reliable, it is difficult to damage; â—† The use of stainless steel trash, water tank; â—† The hydraulic system core element is imported; â—† appearance design computer design, high side skirts, surface transition, the overall coordination of symmetry;
Vehicle configuration basic configuration
Dedicated configuration
Road sweeper principle The auxiliary engine drives the hydraulic oil pump and fan. The hydraulic oil pump drives the left and right reticle to retract, lift, and rotate. Scrub the left and right sides to sweep the trash on both sides to the front of the suction nozzle. The fan creates a high-speed air flow through the air duct formed by the waste container, the suction pipe and the suction nozzle. Under the effect of the air flow, the waste is sucked into the suction nozzle and enters the waste container. Chassis engine drives the sweeper to walk forward. Rubbish that sweeps to the front of the nozzle continuously enters the suction nozzle and is continuously sucked into the bin to clean the road surface.
Operation procedure 1: Cleaning work 1 Turn on the power of the control box and point the control valve to the sub valve position 2 Start the auxiliary machine 3 Turn the slave clutch control button to the closed position and the fan starts to work 4 Point the vacuum box control to a lowered position 5 Point the left or right control to the down position 6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right) 7 Point the left spray, right spray, and rear spray water control knobs to the open position 8 Point the pump control knob to the open position 9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving 2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position 3 Point the broom control to the middle 4 Point the swash plate control to the ascending position and then to the middle position 5 Point the vacuum box control knob up and then back to the middle position 6 Point the secondary engine clutch control knob to the sub-position and then to the middle position 7 Point the control valve control button to the middle position 8 Shutdown the secondary engine 9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve. 2 Start the vehicle's main engine 3 Depress the vehicle clutch 4 Open the vehicle's additional oil pump clutch switch (pull outward) 5 Loosen the vehicle clutch at an appropriate speed 6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds 7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops. 8 Garbage Cleaning 9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position. 10 Point the rear door control to the off position, and then to the middle position after 10 seconds 11 Clean up the end of rubbish 12 Depress the vehicle clutch 13 Close the additional pump clutch control knob (pull inwards) 14 Loosen the vehicle clutch at an appropriate speed 15 Point the control valve of the control box to the middle position 16 Switch off the control box
Description Jianghuai Road Vehicle garbage bin volume of 3.5 cubic meters, the clean water tank capacity of 1 cubic meter, the use of Jiangling Deputy Engine, vehicle operation efficiency.
Performance characteristics â—† Control box in the cab, the system of electrical centralized control, easy to operate. â—† The four-sweep plate is combined with a suction nozzle to perform suction and suction. The suction and suction capability is excellent, and the swash plate has anti-collision function. â—† Both sides can work at the same time, but also can work independently on one side â—† Cleaning device mechanism is simple and reliable, it is difficult to damage; â—† The use of stainless steel trash, water tank; â—† The hydraulic system core element is imported; â—† appearance design computer design, high side skirts, surface transition, the overall coordination of symmetry;
Vehicle configuration basic configuration
| Overall size (mm) | 5920×1990×2350,2310 | Total mass (Kg) | 6145 |
| Carriage size (mm) | × × | Rated load quality (Kg) | 1240 |
| Approach/Departure angle | 23/10 | Service quality (Kg) | 4710 |
| Front suspension/rear suspension (mm) | 1105/1455 | The maximum speed (km/h) | 98 |
| Vehicle identification code | LJ11KDBC×××××××××× | ||
| Chassis model | HFC1060K20T | ||
| engine model | Engine manufacturer | Displacement ml | Power kw |
| HFC4DA1-2B2 HFC4DA1-2B1 | Anhui Jianghuai Automobile Co., Ltd. Anhui Jianghuai Automobile Co., Ltd. | 2771 2771 | 88 80 |
| Fuel type | Diesel | Emission Standards | GB17691-2005 State III, GB3847-2005 |
| Number of axes | 2 | Number of tires | 6 |
| Wheelbase | 3360 | Tire specifications | 7.00R16, 6.50-16 |
| Axle load | 2645/3500 | Front track | 1440 |
| Number of leaf springs | 7/4+5,8/4+5 | Rear track | 1425 |
| Sub engine model | JX493G |
| Secondary engine power | 57 kW 77.5 hp |
| Maximum total mass | 6500 kg |
| Maximum speed | ≥95km/h |
| Sweep width | ≥2.8-3 m |
| Water tank capacity | 0.8-1m3 |
| Trash capacity | 3-3.5 m3 |
| Working speed | 3～15km/h |
| Maximum operating capacity | 45000 m2/h |
| Maximum suction particle size | 100 mm |
| Cleaning efficiency | ≥99% |
Road sweeper principle The auxiliary engine drives the hydraulic oil pump and fan. The hydraulic oil pump drives the left and right reticle to retract, lift, and rotate. Scrub the left and right sides to sweep the trash on both sides to the front of the suction nozzle. The fan creates a high-speed air flow through the air duct formed by the waste container, the suction pipe and the suction nozzle. Under the effect of the air flow, the waste is sucked into the suction nozzle and enters the waste container. Chassis engine drives the sweeper to walk forward. Rubbish that sweeps to the front of the nozzle continuously enters the suction nozzle and is continuously sucked into the bin to clean the road surface.
Operation procedure 1: Cleaning work 1 Turn on the power of the control box and point the control valve to the sub valve position 2 Start the auxiliary machine 3 Turn the slave clutch control button to the closed position and the fan starts to work 4 Point the vacuum box control to a lowered position 5 Point the left or right control to the down position 6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right) 7 Point the left spray, right spray, and rear spray water control knobs to the open position 8 Point the pump control knob to the open position 9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving 2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position 3 Point the broom control to the middle 4 Point the swash plate control to the ascending position and then to the middle position 5 Point the vacuum box control knob up and then back to the middle position 6 Point the secondary engine clutch control knob to the sub-position and then to the middle position 7 Point the control valve control button to the middle position 8 Shutdown the secondary engine 9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve. 2 Start the vehicle's main engine 3 Depress the vehicle clutch 4 Open the vehicle's additional oil pump clutch switch (pull outward) 5 Loosen the vehicle clutch at an appropriate speed 6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds 7 Point the car control button to the up position. At any time according to the inclination of the car box, you can point the control button to the middle position. At this time, the car tilts up and stops. 8 Garbage Cleaning 9 When the garbage is cleaned, point the control button of the car to the lowered position. After the car is fully returned, point the control button to the middle position. 10 Point the rear door control to the off position, and then to the middle position after 10 seconds 11 Clean up the end of rubbish 12 Depress the vehicle clutch 13 Close the additional pump clutch control knob (pull inwards) 14 Loosen the vehicle clutch at an appropriate speed 15 Point the control valve of the control box to the middle position 16 Switch off the control box
Pipe Laminating Extrusion Machine
Pipe Laminating Extrusion Machine,Pipe Extruding Coating Machine,Epe Pipe Laminating Machine,Foam Pipe Laminating Extrusion Machine
Laizhou Jinlida Machinery Co.,Ltd , https://www.jinlidafoammachine.com