What is the difference between the so-called EFI engines and direct injection engines? Is it better to save fuel with higher technology? Do not buy direct injection out? Let me tell you about it today. Do you have to buy a direct sprayer?
First of all, what is EFI and what is direct injection?
The full name of EFI is called electronically controlled fuel injection. Fuel injection is controlled by computers and sensors. The cars that can now be purchased are all EFI.
The principle of traditional EFI (hereafter referred to as “EFIâ€) refers simply to injecting fuel into the intake manifold of each cylinder, mixing it with air, and then entering the corresponding combustion. Tube injection.
Direct injection is also a kind of EFI, full name is called direct injection in cylinder. It is to directly inject fuel into the cylinder and mix it with air directly. The representative of direct injection is VW's TSI, TFSI, and GM's SIDI.
Direct injection advantages:
Indeed, direct-injection technology has been updated, and we can also see through a simple comparison of principles. Direct injection can more precisely control the amount of fuel injected, and it also has advantages in oil and gas atomization and mixing efficiency. In combination with high-pressure injection and stratified combustion technology, combustion is more uniform and more fuel efficient.
This also makes direct-injection engines have better power, and the level of fuel consumption control at high-speed cruising is very satisfying.
Therefore, in theory, direct injection engines are more efficient and more fuel efficient.
But in fact, direct injection also has its own problems.
The first is more difficult to remove carbon deposits.
The first thing to say is that carbon deposition is an inevitable phenomenon in the operation of an engine, and any engine will produce it.
For EFI, oil and gas are already mixed in the intake manifold, and their mixture can have the effect of flushing the intake manifold, making the intake and intake valves less likely to produce large amounts of carbon.
Direct injection fuel injection is not through the intake manifold, so it will not clean the intake manifold. Therefore, once the direct injection engine produces carbon deposits at the intake port, it will be more difficult to remove, making the intake efficiency drop.
Therefore, with the direct injection engine, manufacturers will recommend the use of clean additives, not entirely.
Second, direct injection of giant oil?
For example, as mentioned earlier, direct injection engines need to cooperate with many other technologies to achieve maximum efficiency. However, if many domestic direct injection engines are used to castrate the stratified combustion technology, its performance certainly is not as good as the publicity.
Because the fuel consumption problem is related to too many factors, gearbox matching, vehicle weight, driving habits, road conditions, etc. will have even greater impact. Direct injection technology only represents the engineers' efforts in the form of fuel injection, so we cannot simply be rough That said, direct injection will certainly save a lot of oil.
In summary, it is:
The direct injection of greater significance is in fact the overall technological upgrading of the engine. Previously, manufacturers using EFI have also gradually used direct injection technology. But this does not mean that direct injection is invincible, but also has the above-mentioned problems, and each direct injection technology also has different differences. Moreover, direct-injection vehicles are generally more expensive. When buying a car, we don't have to worry about EFI or direct injection. Don't be misled by the exaggerated propaganda of the factory, and we are too superstitious about a certain technology.
Silicone Oils,Linear Polysiloxane Compounds,Silicone Oil For Treadmill,Silicone Oil For Lubricant
Henan Minmetals East New Materials CO. LTD. , https://www.east-silicones.com