How to install vault door?

1. We can check the products to see if there are any missing parts and the quality is qualified. If there is a problem, it can be replaced before installation, to avoid finding the problem after the installation is completed. It takes time and effort to disassemble it, so we can check it first.

2. At the time of installation, since our vault door has been assembled by the manufacturer, only the door panel needs to be fixed in the door hole, and it is fixed with special equipment provided by the manufacturer. We can use the crane if there is no manual work, just put the door body vertically into the reserved door hole. During the installation process, if you want to achieve a better installation effect, remember to handle some details carefully. Please pay attention to parallel to the bottom of the door hole and the plane when installing, so as not to tilt the installation. Do a good job of cleaning up debris, and clean the door hole to avoid unstable installation and safety accidents in the later period.

3. Welding expansion screws, the installation of the vault door requires at least six expansion screws. All we need to do is weld these expansion screws to the door body. The role of this step is to fix the product in the door opening.

4. Pouring cement. Wrap the vault door when pouring. The purpose of this is to prevent the mortar from splashing onto the door. The trouble of cleaning is not to mention. If it is sprayed into the interior, it will be more troublesome and will affect the later use. .

5. For commissioning, first check whether the appearance of the door body is affected, whether it is tilted, etc.; then check whether the lock can be used normally, whether the password is correct, whether the switch door panel is not smooth, or stuck; after confirming that it is correct, the product is installed carry out.