Glue pump is a kind of pump, glue pump also has many categories, large glue pump is mainly used in industrial buildings, the common is the use of glue pump slurry, there are lightweight glue pump.
First, glue pump product advantages:
1, glue pump is mainly inside and outside the rotor, shaft, pump body, pump cover, bracket, seal, bearing and other components.
2, glue pump delivery of liquid smooth, no pulsation, vibration, low noise.
3, glue pump speed and flow linear function, may be appropriate to change the speed to change the pump flow. High viscosity pump is especially suitable for high viscosity medium delivery. High viscosity pump shaft end with mechanical seal.
4, glue pump to prevent leakage.
5, suitable for outdoor installation, closed magnetic coupling cavity can protect the outer magnet is not in contact with moisture or external substances.
6, glue pump a variety of standard bearing materials to choose from: cast iron, copper, graphite, tungsten carbide.
7, the standard magnet material is NdFeB alloy. The optional SmCo permanent magnet allows operating temperatures up to 250 degrees Celsius.
8, glue pump can be two-way delivery.
9, the front cover and magnetic coupling shield external heating jacket is a standard optional components.
10, the real back-pull design.
11, the standard Flange connection, can only provide optical pump head.
12, with jacket protection.
13, Patented cooling system design: Pump cooling circuit in one, without external cooling.
14, dynamic axial balance system, the axial load to a minimum, reduce power consumption and extend the service life.
15, Gardenia closed magnetic coupling cavity to increase safety.
Second, the glue pump Scope of application:
Glue pump for medium temperature: -10 ℃ - 150 ℃
Glue pump for medium viscosity: 1.0 cst - 300,000 cst
Glue pump for petroleum, chemical, paint, grease, medicine, dyes, food and other industries.
Glue pump applications include the delivery of organic acids, fatty acids, alkaline substances, caustic soda, soda, polymers, soaps, shampoos, animal fats, vegetable oils, chocolates and other specialty fluids.
U tube heat exchanger is suitable for the large temperature difference between tube side and shell side. The shell side media is easy to scale and needs cleaning, while the tube side media is clean and not easy to scale. It is also suitable for high temperature, high pressure, fluid corrosive working conditions.
Each heat exchange tube is bent into U-shape, the two ends are fixed in the upper and lower areas of the same Tube Sheet, and divided into two chambers of inlet and outlet with the partition in the tube box. This kind of heat exchanger completely eliminates the thermal stress, the structure is simpler than the floating type, but the tube side is not easy to clean.
The number of tubes is small, the utilization of the tube sheet is not frequent, and the shell side fluid is easy to short circuiting, which is unfavorable to heat transfer. If there is a leak or damage in the tube, the external U-tube can be replaced, while the broken inner tube can not be replaced, only plugged, and one broken U-tube means two broken, so the U-tube easily scrapped.
U Tube Heat Exchanger,Beu Heat Exchanger,U Type Heat Exchanger,U Tube Type Heat Exchanger
Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jiemaheatexchanger.com