Vertical Ribbon Mixer looks like vertically standard Ribbon Blender. Our Vertical Ribbon Mixer is suitable for the mixing of especially fine materials or adding of grain materials, as well as the mixing of fluid or half-fluid materials such as very evenly distributed fine powder and paint. The processes adopted are pressurization, vacuum mixing, reaction and adhesion.
Â
Working Principle:
Vertical Ribbon Mixer contains three parts - the mixing barrel, mixing helix and flying blades. The coagulated material is cut when the middle helix moves circularly and the flying blades on the barrel side circulate. Vertical Ribbon Mixer is a central tapered ribbon with very small clearance between the edge and the wall. The ribbon moves the materials upward along the vessel wall to the top, the materials then drop by gravity into the center as well.
Features:
1) Materials: Carbon steel, stainless steel
2) Batch capacity: 300--15, 000kg
3) Huge volume, easy to clean and maintain
4) Spraying device can be added to the mixing arm
5)Price Terms: FOB, CIF
6)Delivery Lead Time: 10 - 60 days
Datasheet:
| Model Project | All volume (M3) |
Loads coefficient | Electrical machiney power (KW) |
Size(mm)× Max-diameter ×High | Equipment weight (kg) |
| GPH-0.1 | 0.1 | 0.4-0.6 | 1.5 | Φ1100×1229 | 700 |
| GPH-0.3 | 0.3 | 0.4-0.6 | 4 | Φ1350×1696 | 850 |
| GPH-0.5 | 0.5 | 0.4-0.6 | 4 | Φ1575×1689 | 1300 |
| GPH-1 | 1 | 0.4-0.6 | 7.5 | Φ1900×2262 | 2000 |
| GPH-1.5 | 1.5 | 0.4-0.6 | 11 | Φ2200×2692 | 3300 |
| GPH-2 | 2 | 0.4-0.6 | 15 | Φ2650×2897 | 3600 |
| GPH-3 | 3 | 0.4-0.6 | 18.5 | Φ2400×3267 | 4300 |
| GPH-4 | 4 | 0.4-0.6 | 18.5 | Φ2600×3407 | 5500 |
| GPH-5 | 5 | 0.4-0.6 | 22 | Φ2600×3347 | 7500 |
| GPH-6 | 6 | 0.4-0.6 | 37 | Φ2650×3637 | 8100 |
| GPH-8 | 8 | 0.4-0.6 | 45 | Φ3200×4195 | 9800 |
| GPH-10 | 10 | 0.4-0.6 | 55 | Φ3820×4307 | 11000 |
| GPH-12 | 12 | 0.4-0.6 | 55 | Φ3820×4657 | 13000 |
| GPH-15 | 15 | 0.4-0.6 | 55 | Φ3820×5082 | 15000 |
2.    Changes are available according to customer's special requirement;
3. Â Â Shuang Long Group might develop new data which is not modified timely on the Web.
Application:
Seamless steel pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow - liquids and gases (fluids), slurries, powders and masses of small solids.
Hot rolled seamless steel pipe deformation process can be summarized as three stages: extension, perforation and finishing. Hot rolled seamless steel pipes is relative to the cold-rolled, cold rolling is below the recrystallization temperature of the rolling and hot rolled is carried out at above the recrystallization temperature of the rolling. Hot rolled seamless steel pipe can damage the refinement of the crystal grains of the steel, cast microstructure of the steel ingot and eliminate the defects of the microstructure so that the the steel organization compacting, improves the mechanical properties. This improvement is reflected in the rolling direction so that the steel is no longer at a certain extent isotropic; pouring the formation of bubbles, cracks and osteoporosis, under high pressure and temperature can also be welded together.
Hot Rolled Steel Pipes (Seamless Tube) in different size, specifications, grades & thickness as per the client's requirements. The range offered by tubes is available as per the international & national standard and can be available from us at affordable prices. These pipes are used in various application industry like shipbuilding, power plants, oil and gas, automotive, sugar mills and distilleries, cement and construction industries etc.
Steel Pipe,Seamless Pipe,Welded Pipe,Square Pipe,Round Pipe
Tianjin Youfa Steel Co., Ltd , https://www.youfametal.com