1, Dimension: 77.6X90mm, 3 holes;
2, Thickness: 4.0mm-4.8mm; Rivet holes: 9.4mm;
3, Both smooth and rough surface available
Our clutch button products are suitable for Mack and Tata clutch disc, Leyland tractor clutch disc and some cars, due to the low wearing rate, suitable friction coefficient and the proper hardness, clutch buttons products is replacing part of the clutch facing market, especially in the heavy duty truck market, customers who are using our buttons found it was very economical, as our button is low wear rate, and can compare with the US made clutch button.
We have three clutch button formula currently, one is our regular formula, smooth finish and medium property, another is the low wear formula with rough finish, the third one is a new formula, it's developed with the assistance of the oversea engineer, and this button is following Miba appearance and similar to its finish and property, it is supplied to our OE customers, due to its low cost and excellent property, it is very popular among our customers from South America and India.
One of our formula, the property as follows:
1) Friction coefficient: 0.49-0.58(regular)
Wearing rate: 0.05-0.18(regular).
2) Surface Hardness of button: BHN 25+/-5.
3) Bend test result: Passed, no bearing area on the back plate.
The Single Row Deep Groove Ball Bearing is the most representative structure of the rolling bearing, which is widely used. The raceway located in the inner ring and outer ring is slightly larger than the radius of the rolling ball. In addition to the radial load, it can also bear the axial load of two directions. Small friction torque, the most suitable for high speed rotation, low noise, low vibration use. Besides the way out, there is also a bearing with a steel cover, plus a rubber sealed bearing, or a ring with a retaining ring on the outer ring. Generally, the steel plate punching cage is usually used. The main application of the cage: steel plate stamping cage (wave, crown shape... Single column; S shape... Copper alloy or phenolic resin to cut the cage and synthetic resin forming cage.
Main uses
Car: rear wheel, transmission, electrical equipment parts; electric: General Motors, household appliances. Other: instruments, internal combustion engines, construction machinery, railway vehicles, loading and unloading machinery, agricultural machinery, and various industrial machinery.
Single row Deep Groove Ball Bearing room with the most widely used type of bearing:
1. Basic design of open bearing
2. Seal bearing
3, ICOS oil sealed bearing unit
4, bearing with stop slot, belt or without stop ring
Single Row Deep Groove Ball Bearing
Single Row Deep Groove Ball Bearing,Deep Groove Ball Bearing,Single Row Deep Groove Bearing,Single Row Grooved Ball Bearing
LUOYANG AUTO BEARING CO.,LTD , https://www.ballbearing.nl