API600 Flanged Cast Steel Wedge Gate Valve

Model NO.: ZA40H, ZA540H, ZA940H
Thread Position of Valve Rod: Outside Gate Valve
Usage: Flow Control
Standard: ANSI
Application: Industrial Usage, Water Industrial Usage
Trademark: CD
Transport Package: Plywood Case
Specification: ANSI CLASS150-2500, NPS 2" - 66"
Origin: China
HS Code: 8481804090

API Cast Steel Gate Valves

CHAODA Valves Group is specialized in manufacturing API Cast Steel Gate Valve with following good characteristics: good sealing performance, reliable safety guarantee, long life span and etc. 

All our gate valves have the back seating design. In most cases, the carbon steel gate valve is fitted with a renewable back seat. For stainless steel gate valve, the back seat is machined directly in the bonnet or is machined after welding. When the gate valve is at fully open position, the sealing of the back seat can be very reliable. However, as per the requirement of API 600, it is not advisable to add or change packing by the mean of back seating when the valve is pressure containing.

API600 Flanged Cast Steel Wedge Gate Valve

Type: Z41H,Z40H,Z41Y,Z40Y,Z340H,Z341H
Bore: NPS½~NPS66,DN15~DN1650
Rating: Class150~Class2500,PN20~PN420
Material: Cast Steel
Operation: Manual,Gear Operated,Electric Operated,Pneumatic Operated
Applicable: Oil,Chemical,Natural Gas,Petrochemical,Coal Chemical and so on

CHAODA VALVES GROUP CO.,LTD.
 TEL:0086-577-57757282
 FAX:0086-577-57757273
 

API Cast Steel Gate Valve product description

API Cast Steel Gate Valve (Generally flanged connection, but Butt-welding optional) are suitable for using on various kinds of pipeline from Class150 To Class2500, DN15 To DN1650 to cut off or connect the flowing of medium. By using different material, the valves could be suitable for medium such as water, steam, oil, nitric acid, acetic acid, oxidizing substance, carbamide and etc. Manual/bevel gear/pneumatic or electric actuators could be chosen by needs. 

Just as the other Cast steel JIS gate valve, molded flexible graphite is used for packing. PTFE or combined packing material can be also used if being requested by the customer. The internal surface of the stuffing box, of which area is contacted with the packing, is of excellent finish (Ra 3.2μm). The stem surface, contacting with the packing, should be rolled and pressed after being precisely machined, so as to reach to the high finish and compactness (Ra 0.8μm) and ensure the reliable tightness of the stem area.

Pneumatic Spider

Tubing Pneumatic Spider,Type E Pneumatic Spiders,Pneumatic Spiders Drilling Pipe Spider,Drill Pipe Pneumatic Spider

JIANGSU PETROLEUM MACHINERY CO.,LTD , https://www.jspmgroup.com

Posted on