Car Oil Recycling Machine, Dirty Motor Oil Distillation Plant, Black Dirty Gear Oil Reclaiming System

Waste Oil Distillation & Converting System Series BOD
(Converting waste Engine oils to Base Oil)
 

Economically advantageous
The price of purchasing regenerated oil is typically less than 80% of new oil and can be as low as 50%. There is no downtime when reclaiming on energized equipment. Replacement with new oil and hot oil flush requires equipment switch off.
Control of strategic asset is retained
Oil in use is an asset. Use of regeneration technology removes dependence on oil companies to deliver replacement supplies and isolates from wildly fluctuating external market prices.
Extended life of expensive capital equipment
In situ treatment of transformers dramatically reduces the aging effects on the transformer slowing down the processes that destroy the asset.
II. Brief Description
With the rapid development of refining industry from waste plastics, waste rubber and waste oils, the produced fuel oils by these industries are more and more widespread applied and adopted, and has been penetrated into all areas of the national economy and people's daily lives. But at the same time, due to the rapid development of these industries and the increase of employees, the price of raw materials also is being greatly increased.
 
So how to increase the fuel oil's added value and price on the basis of keeping low raw material cost? The easiest way is to distill (or called rectification) again the crude oil which produced from waste plastics, rubbers and dirty used oils. This type of fuel oil is in light yellow or light red color and its technical indexes of quality can match diesel's standard.  There are two methods to produce this type of fuel oil, one is to set up a large-size petrochemical refining unit costs more than 1 billion US Dollars, the other one is to use low-cost earth furnace. Large refining system brings high cost, but earth furnace is with low working efficiency, unsafely, and not environmental friendly.
 
Our company just developed a new system which can solve these two problems, save your cost and increase the working efficiency at the safe and environment friendly working conditions. It's Waste Oil Distillation & Converting System Series BOD.

 
Working principle
The waste oil is pre-treated by our JL Series or TYA Series system removing the mechanical particles & impurities, then pumped into distillation kettle, add the liquid catalytic, blend and heat at decompression status, then distillation, oil vapor come into cooling system and cooled down to oil (diesel), some vapor which not cooled will come to furnace system to burn.
 
Main structure:
 
The BOD series machine is composed of following systems:
A.  Pre-treatment System: pre-treat the waste oil, remove particles and water content.
B.  Catalyst system: Catalyst Reactor, blender; 
C.  Distillation system: distilling tower, distilling kettle, heater unit, circle pump; 
D.  Cooling system: refrigerating machine, water pump, water tank, cooler, Condenser; 
E.  Degasification system:  Depends on actual need.
F.  Vacuum System:  depends on actual need.
G.  Transit oil storage system:  distilling oil storage tank 
H.  Controlling system: all kinds of gauge (vacuum gauge, pressure gauge etc.), temperature controlling system and electrical controlling system.
I.   Exhaust gas processing system
J.  Filtering System: connect our filter, TYA series or JL Series to remove more impurities from the oil, make the oil cleaner.

 
 1.  What type of oil can be refined & recycled by BOD Series and convert to Base oil?
A. Crude oil refined from waste plastics and rubbers.
B. Waste Oils: Waste engine oils, diesel oil, gasoline oil, lube oil, waste oil residues, etc…
C. Waste Base Oil.
D. Waste Washing Oil.
 
2.  Can BOD Series recycle mixed oils?
Yes, BOD Series can recycle the mixed mineral oils including diesel engine oil, gasoline engine oil, hydraulic oil, gear oil and other industrial lubrication oil.
 
3.  What residues or by-products BOD System produce after recycling?
Normally there are very few residues or by-products. It's oil residues, which can be used as fuel to heat the oil in the heating system, without any pollution.
4. What is recovery rate?
BOD Series is high efficiency system, which can get more than 85 ~ 95% rate.
 
5. What is treated oil?
You can get mainly base oil from this system, also gasoline and small quantity of desiel oil can be obtained.
 
6. What are treated oil's applications?
Base oil & Diesel can be used directly.
 
7.  Are there any chemical materials needed during processing?
Yes, there is some catalyst needed in the process (please contact our sales, they will provide you detailed information.)
 
8.  How long is lifetime of BOD Series plant?
The life time can last more than 6-8 years under proper operation and periodical maintenance. 
 
9.  How about the maintenance of BOD Series?  
The maintenance is very simple. After you read the operation manual which to be provide after you place order, you will know that.
 
10.  Does BOD Series needs professional engineers to operate?
The operation of BOD Series is very simple. Generally, two workers can operate it after two days' training and reading the operation manual carefully.
 
11.  Does BOD Series needs auxiliary equipments?
We suggest that customers order TYA Series Lubricating oil purifier plant from us to improve the oil's quality and recycling precision, and order one JL Series Portable oil purifier machine to remove particles from the waste oil before pumped into distillation kettle.   
 
12.  How to install BOD Series ?
Customer can install BOD Series according to operation manual.  
 
13.  What space does BOD Series need?
For different models, different space is required. Pls contact our salesman and tell them which model you need, then they will provide you more info.
 
14.  How long is the production time & shipping time?
It needs about 20 ~ 45 working days' production period in our factory according to the actual model you order.
As for the shipping time, pls let us know your nearest sea port which you want us to ship to, then we will check out the time for you.  
 
15. How long is warranty period?
 
ZHONGNENG Warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment.
 
ZHONGNENG's obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period.  
 
ZHONGNENG shall not in any event be held responsible for any indirect or consequential damages.  
 
We have been engaged in this industry for 15 years, 11 years certified GOLD SUPPLIER by ALIBABA.
 
For more details, contact us freely:
www.zhongnengcq.com
www.zhongnengcq.cn
Tel: 0086-23-68069021
Fax: 0086-23-68069021
 

 
Posted by Ansen
  Waste Oil Distillation & Converting System Series BOD
(Converting waste Engine oils to Base Oil)
 

Economically advantageous
The price of purchasing regenerated oil is typically less than 80% of new oil and can be as low as 50%. There is no downtime when reclaiming on energized equipment. Replacement with new oil and hot oil flush requires equipment switch off.
Control of strategic asset is retained
Oil in use is an asset. Use of regeneration technology removes dependence on oil companies to deliver replacement supplies and isolates from wildly fluctuating external market prices.
Extended life of expensive capital equipment
In situ treatment of transformers dramatically reduces the aging effects on the transformer slowing down the processes that destroy the asset.
II. Brief Description
With the rapid development of refining industry from waste plastics, waste rubber and waste oils, the produced fuel oils by these industries are more and more widespread applied and adopted, and has been penetrated into all areas of the national economy and people's daily lives. But at the same time, due to the rapid development of these industries and the increase of employees, the price of raw materials also is being greatly increased.
 
So how to increase the fuel oil's added value and price on the basis of keeping low raw material cost? The easiest way is to distill (or called rectification) again the crude oil which produced from waste plastics, rubbers and dirty used oils. This type of fuel oil is in light yellow or light red color and its technical indexes of quality can match diesel's standard.  There are two methods to produce this type of fuel oil, one is to set up a large-size petrochemical refining unit costs more than 1 billion US Dollars, the other one is to use low-cost earth furnace. Large refining system brings high cost, but earth furnace is with low working efficiency, unsafely, and not environmental friendly.
 
Our company just developed a new system which can solve these two problems, save your cost and increase the working efficiency at the safe and environment friendly working conditions. It's Waste Oil Distillation & Converting System Series BOD.

 
Working principle
The waste oil is pre-treated by our JL Series or TYA Series system removing the mechanical particles & impurities, then pumped into distillation kettle, add the liquid catalytic, blend and heat at decompression status, then distillation, oil vapor come into cooling system and cooled down to oil (diesel), some vapor which not cooled will come to furnace system to burn.
 
Main structure:
 
The BOD series machine is composed of following systems:
A.  Pre-treatment System: pre-treat the waste oil, remove particles and water content.
B.  Catalyst system: Catalyst Reactor, blender; 
C.  Distillation system: distilling tower, distilling kettle, heater unit, circle pump; 
D.  Cooling system: refrigerating machine, water pump, water tank, cooler, Condenser; 
E.  Degasification system:  Depends on actual need.
F.  Vacuum System:  depends on actual need.
G.  Transit oil storage system:  distilling oil storage tank 
H.  Controlling system: all kinds of gauge (vacuum gauge, pressure gauge etc.), temperature controlling system and electrical controlling system.
I.   Exhaust gas processing system
J.  Filtering System: connect our filter, TYA series or JL Series to remove more impurities from the oil, make the oil cleaner.

 
 1.  What type of oil can be refined & recycled by BOD Series and convert to Base oil?
A. Crude oil refined from waste plastics and rubbers.
B. Waste Oils: Waste engine oils, diesel oil, gasoline oil, lube oil, waste oil residues, etc…
C. Waste Base Oil.
D. Waste Washing Oil.
 
2.  Can BOD Series recycle mixed oils?
Yes, BOD Series can recycle the mixed mineral oils including diesel engine oil, gasoline engine oil, hydraulic oil, gear oil and other industrial lubrication oil.
 
3.  What residues or by-products BOD System produce after recycling?
Normally there are very few residues or by-products. It's oil residues, which can be used as fuel to heat the oil in the heating system, without any pollution.
4. What is recovery rate?
BOD Series is high efficiency system, which can get more than 85 ~ 95% rate.
 
5. What is treated oil?
You can get mainly base oil from this system, also gasoline and small quantity of desiel oil can be obtained.
 
6. What are treated oil's applications?
Base oil & Diesel can be used directly.
 
7.  Are there any chemical materials needed during processing?
Yes, there is some catalyst needed in the process (please contact our sales, they will provide you detailed information.)
 
8.  How long is lifetime of BOD Series plant?
The life time can last more than 6-8 years under proper operation and periodical maintenance. 
 
9.  How about the maintenance of BOD Series?  
The maintenance is very simple. After you read the operation manual which to be provide after you place order, you will know that.
 
10.  Does BOD Series needs professional engineers to operate?
The operation of BOD Series is very simple. Generally, two workers can operate it after two days' training and reading the operation manual carefully.
 
11.  Does BOD Series needs auxiliary equipments?
We suggest that customers order TYA Series Lubricating oil purifier plant from us to improve the oil's quality and recycling precision, and order one JL Series Portable oil purifier machine to remove particles from the waste oil before pumped into distillation kettle.   
 
12.  How to install BOD Series ?
Customer can install BOD Series according to operation manual.  
 
13.  What space does BOD Series need?
For different models, different space is required. Pls contact our salesman and tell them which model you need, then they will provide you more info.
 
14.  How long is the production time & shipping time?
It needs about 20 ~ 45 working days' production period in our factory according to the actual model you order.
As for the shipping time, pls let us know your nearest sea port which you want us to ship to, then we will check out the time for you.  
 
15. How long is warranty period?
 
ZHONGNENG Warrants the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment.
 
ZHONGNENG's obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period.  
 
ZHONGNENG shall not in any event be held responsible for any indirect or consequential damages.  
 
We have been engaged in this industry for 15 years, 11 years certified GOLD SUPPLIER by ALIBABA.
 
For more details, contact us freely:
www.zhongnengcq.com
www.zhongnengcq.cn
Tel: 0086-23-68069021
Fax: 0086-23-68069021
 

 
Posted by Ansen
 

Low Headroom Electric Chain Hoist

he low-headroom chain electric hoist is improved on the structure of the running type HHBB Electric Chain Hoist, shortening the minimum distance between the lower hook and the running track, and reducing the height of the electric hoist body, thereby saving space. The low clearance electric hoist has a unique and optimal structure in shortening the distance between the body and the beam track.

The low headroom electric chain hoist is suitable for use in workplaces with low plant heights and strict requirements on lifting heights, especially in temporary plant buildings or places where effective lifting space needs to be expanded. The low headroom electric chain hoist is composed of 2 sports cars and an electric host.

Low Headroom Electric Chain Hoist,Dc Brake Low Headroom Electric Chain Hoist,Hhbb Low Headroom Electric Hoist,Chain Hoist Of Low Headroom

Hengshui Tianqin Import and Export Trade Co.,Ltd , https://www.itahoists.com