65mm Round Universal Tyre Repair Patch

General Info.

 

Product Name: US style all purpose tyre patch

Part No.: UP-R65

Specification: 65mm, Round

Packaging: 30pcs/box, 36box/CTN

MEAS: 43x22x19.5CM

N.W/G.W: 8.3/8.5KG

 

Selling Points

 

1. Designed for use in radial and bias ply tires.

 

2. Rubber-reinforced; US style

 

3. Non-directional, center over injury repair units.

 

4. Permanent, reliable repair.

 

5. Perfect for nail hole repairs in passenger and light truck tires.

 

6. Designed for chemical vulcanization.

 

7. Gray vulcanizing gum, blue poly backing.

 

Quality Guaranteed

 

Excellent quality, similar to Rema Tip Top and Tech; Samples can be sent for customer's testing and evaluation.

 

 

Description

 

HOPSON Universal repair units are rubber reinforced repairs that can be applied in any repairable area of a radial or bias ply tire; They can also be used for tube repairing.

INSTRUCTIONS

•  Inspect tyre for repairability using tyre manufactureer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.
• Probe injury to determine exact size and direction, removing all deris. Injuries must be within repairable area and be no larger than 6mm(1/4'') in diameter.
• Apply vulcanzing cement to injury channel and fill with a vulcanizing insert. Cut insert flush with the innerliner.
• Center patch over injury, outline for reference, clean using buffing solution and innerliner scraper. Mechanically buff area to a velvet texture. finally removing all buffing dust.
• Apply vulcanzing cement allowing it to DRY THOROUGHLY. Apply reapair patch, stitching it down completely, working from the center out.
• Remount and inflate tyre following all safety guidelines. Carefully inspect repair for leaked and tyre for addtional leaks or damage using tyre manufacturer or HOPSON LAB guidelines. If all inspection criteria are met, the tyre is ready to be put back into service.

General Info.

 

Product Name: US style all purpose tyre patch

Part No.: UP-R65

Specification: 65mm, Round

Packaging: 30pcs/box, 36box/CTN

MEAS: 43x22x19.5CM

N.W/G.W: 8.3/8.5KG

 

Selling Points

 

1. Designed for use in radial and bias ply tires.

 

2. Rubber-reinforced; US style

 

3. Non-directional, center over injury repair units.

 

4. Permanent, reliable repair.

 

5. Perfect for nail hole repairs in passenger and light truck tires.

 

6. Designed for chemical vulcanization.

 

7. Gray vulcanizing gum, blue poly backing.

 

Quality Guaranteed

 

Excellent quality, similar to Rema Tip Top and Tech; Samples can be sent for customer's testing and evaluation.

 

 

Description

 

HOPSON Universal repair units are rubber reinforced repairs that can be applied in any repairable area of a radial or bias ply tire; They can also be used for tube repairing.

INSTRUCTIONS

•  Inspect tyre for repairability using tyre manufactureer of HOPSON LAB guideline. If repairable, mark injury with crayon and carefully remove injuring object.
• Probe injury to determine exact size and direction, removing all deris. Injuries must be within repairable area and be no larger than 6mm(1/4'') in diameter.
• Apply vulcanzing cement to injury channel and fill with a vulcanizing insert. Cut insert flush with the innerliner.
• Center patch over injury, outline for reference, clean using buffing solution and innerliner scraper. Mechanically buff area to a velvet texture. finally removing all buffing dust.
• Apply vulcanzing cement allowing it to DRY THOROUGHLY. Apply reapair patch, stitching it down completely, working from the center out.
• Remount and inflate tyre following all safety guidelines. Carefully inspect repair for leaked and tyre for addtional leaks or damage using tyre manufacturer or HOPSON LAB guidelines. If all inspection criteria are met, the tyre is ready to be put back into service.

FIBER LASER CUTTING MACHINES

UTECH`s fiber laser machines are a must-have if you`re looking for quick and accurate cuts on sheets of metal. Metal fabrication shops and companies that manufacture customized metal parts can drastically improve their efficiency of production with our fiber laser cutting machines. Our machines are capable of cutting steel, brass, aluminum and stainless steel without fear of back reflections damaging the machine. By using these fiber laser machines, you`ll reduce your maintenance requirements and cut your operating costs considerably.

FIND THE RIGHT Fiber Laser Cutting Machine:

We offer laser power options at 1000W, 1500W, 2000W, 2500W and 3000W. With a maximum cutting speed of 35 m/min, these fiber laser machines complete jobs quickly with high-level precision. UTECH also offers machines with an enclosed working area to eliminate light pollution.

Product Application:

The Fiber Lasers bring you a cost effective, low-maintenance, low operating cost, environmentally friendly solution to your organization. We deliver a machine that provides quality cutting and tolerances with small productivity loss between jobs, equating to higher returnon investments. Our fiber laser cutting machines are developed and sold based on these criteria.
 
• Manufactured by people who use their own machines.
• The resonator comes with a 100,000 hour warranty from the manufacturer (IPG/Raycus)
• Higher cutting speeds possible
• Dual interchangeable tables allow for faster loading and unloading, reducing downtime
• Laser wavelength is one-tenth of a fiber laser
• Reduction in cutting variables or tribal knowledge
• Fiber Laser is extremely efficient, equates to very low power consumption
• Low cost of operation, energy cost reduced, no laser gases requied to produce beam
• High cutting flexibility (Steel, Stainless Steel, Brass, Copper, Titanium, Aluminum, and more)

• Laser beam transmitted through a fiber optic.cable rather than with mirrors and channel tubing resulting in negligible power loss.

Model	UT-1325	UT-1530	Option
Max Cutting Range	1300*2500mm	1500*3000mm	According to  Demands
Machine Size(L*W*H)	2.4*4.7*1.9m	2.4*5.7*1.9m
Accessory Parts(L*W*H)	Chitler 1*1*1.2m Control Box 1*0.8*1.8m  Fiber Module 0.5*0.6*0.14m
Laser Medium	Single Core Junction Semiconductor Module
Max Cutting Speed	25m/min
Cooling Way	Water Cooling
Laser Power	500W(Option 750W/1000W/2000W)
Min Line Width	0.1mm
Cutting Depth	0.2-6mm
Driving and Transmission Way	Imported Servo Motor and Linear Guide Rail
Power Requirements	380V/50Hz/16A
Continuous Working Time	24Hours
Related Weight	Machine Body 2732kg     Trolley 116kg     Computer Cabinet 56kg     Servo Cabinet 75kg  Transformer 77kg     Chiller 93kg     Fiber Module 50kg

Applicable materials and industry:
 
Fiber Laser Cutting Machine Applicable Target Customers
» This series fiber laser cutting machine is suitable for the customers who need to process plenty of thin metal sheet and high reflective metal materials.
Fiber Laser Cutting Machine Applicable material
» Specially for carbon steel, stainless steel, alloy, aluminum, galvanized steel, titanium, brass, copper and other metal sheets.
Fiber Laser Cutting Machine Applicable Industry

» Sheet metal working, hardware, kitchenware, electronic, automotive parts, advertising sign, furniture, lighting, decoration, jewelry, etc.

Fiber Laser Cutting Machine

Fiber Laser Cutting Machine,Metal Fiber Laser Cutting Machine,Fiber Co2 Laser Cutting Machine,Automatic Fiber Laser Cutting Machine

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com