Installation principle of outdoor wireless bridge
1. The wireless bridge point-to-point scheme is aligned at both ends. The point-to-multipoint scheme pays attention to the bridge angle range, and does not exceed the maximum angle of the center point. Both ends of the installation are visible and unobstructed
2. When two or more center ends are installed together with the installation position, the installation distance between them is staggered by more than 1 meter, and the installation distance of bridges over 10 kilometers should be staggered by more than 2 meters (distance is farther away, between each other) The interference is smaller).
3. When two or more center ends are installed together, the frequency between them is staggered by more than 100 MHz.
External antenna panel bridge installation
Among the common outdoor wireless bridges, the DS-3WF03A, DS-3WF05A-5AC, and DS-3WF20A-5AC three bridges have external antenna panels that need to be installed separately.
Installation of external antenna bridge, taking DS-3WF03A/DS-3WF05A-5AC as an example
Packing List
installation steps
The installation of the DS-3WF20A-5AC bridge is similar to the installation of the DS-3WF03A/DS-3WF05A-5AC.
No external antenna bridge installation
No external antenna bridge installation, with DS-3WF03C/DS-3WF05C-5AC
DS-3WF03C packing list
DS-3WF03C installation steps
DS-3WF05C-5AC packing list
DS-3WF05C-5AC installation steps
The installation of the DS-3WF10A-5AC and the DS-3WF15A bridge is similar to the installation of the DS-3WF05C-5AC.
The following is the wireless bridge site installation diagram
Correct installation method and some model installation examples
The wrong installation method is as follows:
Lifting Chamber Baler,Used Clothings Baler Machine,Vertical Clothes Compress Baler,Vertical Lifting Chamber Baler
DILOYA GROUP CO.,LTD. , https://www.diloyabaler.com