To explain why these large vehicle vehicles use diesel engines instead of gasoline engines, we must first understand the difference between gasoline engines and diesel engines. It is clear where the advantages of the diesel engine as a power output.
We all know that diesel cars are noisier than petrol cars, especially when starting and accelerating. This is because of the difference in the ignition methods of diesel engines. Because diesel has a low ignition point, diesel engines use high-pressure injectors to inject diesel fuel directly into the cylinders of the engine. After the cylinders are atomized, the diesel engine reaches the deflagration point and self-ignites by compressing the gas in the cylinder. Deflagration sounds louder than normal ignition.
But the energy efficiency of diesel is higher than that of gasoline for a certain distance. The energy consumption is 45%-60% of gasoline engine, and the thermal efficiency is also higher than that of gasoline. The calorific value of diesel is relatively high, and the combustion of diesel of the same quality releases more energy than gasoline. That is to say, the same displacement of diesel vehicles will save about 30% of the oil than gasoline vehicles, and the fuel economy is one-third higher than that of gasoline engines. Using a diesel engine for large vehicles can save a lot of costs.
A diesel engine has a larger torque than a gasoline engine at low speeds, and the power will be more powerful. Especially when climbing a hill, a large vehicle used to drive several tons of weight is more suitable than a gasoline engine. Moreover, because the diesel engine eliminates the ignition process, there is no spark plug, and there is less chance of a single part missing a point of failure. Â
But when it comes to diesel, it's not so convenient. Gasoline vehicles only need to be refueled according to the required label. Diesel vehicles need to fill the corresponding negative diesel oil when the temperature is too low in the winter, because diesel oil will freeze in the tank and cannot be started.
In general, the diesel engine has a relatively simple structure, low-speed torque, good fuel economy, and is suitable for large-scale automobiles.
Safety Seats Injection Molding Parts
There are many kinds of Plastic Injection Components, customized drawings, factory direct sales prices are more favorable, various material specifications are complete, from design to processing, we have all-inclusive, professional customer service, and provide you with the best solution.we will quickly quote you, the customer confirms the quotation and places an order, the product processing is completed and the packaging logistics is arranged, and the customer confirms the receipt Goods praise. Plastic Injection Insert Molding is versatile and durable, we only make high-quality Plastic Parts.
Plastic mold casting systems can be divided into three categories according to different types of molds:
(1) Door mold, gate and gate parting line, mold and peeling, the most simple design, convenient processing, and low cost, so more and more people use the door system to operate.
(2) Nozzle mold: The gate and gate line are not divided into types. Usually, a set of nozzle parting line is designed directly in the product design. The design is more complicated and the processing is difficult. The fine nozzle system is often selected according to the product requirements.
(3) Hot runner mold, the mold is the same structure and fine nozzle, the biggest difference is that one or more heat flow, temperature and hot pumping nozzle, but not cold feeding and demoulding, the runner and gate are directly on the product, So the port does not need demoulding, also known as pouring system, this system can save raw materials, suitable for products with expensive raw materials, high demand, difficult mold design and processing, and high cost. The heat flow channel system, also known as the heat flow channel system, is mainly composed of a heat flow channel cover, a heat flow channel plate and a temperature control electrical box. There are two commonly used heat flow channel systems: single-point heat flow channels and multi-point heat flow channels. Using a single-point thermal gate, the molten plastic is injected directly into the cavity with a single thermal gate sleeve. Multi-point hot sprue is used to branch molten material into each hot sprue sleeve and then through the hot sprue plate into the mold cavity
Safety Seats Injection Molding Parts,Abs Plastic Injection Handle Molding Parts,Plastic Injection Molding Abs Cover,Custom Plastic Injection Molding Car Parts
Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com