Double chamber vacuum brazing furnace machinery is consisted of vacuum chambers, heating system,work rest,pumping system,cooling system,electrical control system and so on.
One. Functional Characteristics:
1,Eequpment is double vacuum chamber,a set of pumping system configuration scheme. Two chambers can alternate work,increase production efficiency.Â
2,Vacuum cavity design for double hull,intermediate sandwich for water layer.
3,Electrical adopt PLC program,man-machine interface (touch screen)for operation control system.Can operate by manual ,semi-automatic and full-automatic operation.
4,Heating temperature and time can be set at random.
5,Monitoring system
1) Match digital display compound vacuum gauge.
2) Match temperature monitoring device automatically.
3) Match water automatic alarm device.
4) Match pneumatic automatic alarm device.
6,Automatic control system functions:
1) Vacuum system control and process shows.
2) The basic unit of work control and power show.
3) Security alarm and diagnostic display.
7,Work rest is fixed form,installed in the middle of the cavity.There are three layers(upper,middle and down) ,cup basket is placed in work rest.
8,Using small hydraulic forklift to load and unload the workpiece. (It need to prepare by customer)
Two. Main configuration and parameters:
Item |
Description |
|
|
Vacuum Chamber  |
Inner Chamber Size |
Φ1800×2200  mm/Optional |
Material |
All the material is using Stainless steel. Inner plating thickness≥10mm,Outer plating thickness≥5mm  Door flange thickness≥30mm  Chamber surface spray paint treatment, the paint color could decide by customer. |
|
Structure |
Horizontal,Double door structure. Double layer structure,interlayer for cooling water. Gate use spring hinge,can let the door seel uniform pressure. Door adopt cylinder clamping mechanism,decorate 2 sets. Pumping point was in top of the chamber and flashboard valve connection. |
|
Inspection Window |
There is a inspection window in the vacuum chamber door,can observe the inner working. |
|
Work Rest |
Using Q235 angle iron to make, total 3 layers. Match 6 cup basket,use stainless steel wire mesh production. |
|
Heating System |
Heating using stainless steel U type heat tube.The highest temperature achieved 550ºC in chamber. Heat tube distribution: Around the work rest.Up and  down,right and left,front and back,middle two layers. Match 8 thermocouples,respectively test 8 points  environment temperature in chamber. Using solid-state relay, temperature controller, PID control. Heating power about 90KW. |
|
Pumping System |
Diffusion Pump |
Adopt 1 set of KT-800 diffusion pump,be made by Zhenlong Company in Shenyang. Pumping speed: 30000L/S Â Power:13KW Match 1suit of water cold trap |
Booster Pump |
Adopt one set of RTO-1200 roots pump,be made by Cuiman Company in Shanghai. Pumping speed: 1200L/S Â Â Power:12KW |
|
Mechanical Pump |
Adopt 1set of HL-150 rotary plunger valve pump,be made by Shengong Company in Zhejiang. Pumping speed: 150m3/h  Power:11KW |
|
Holding Pump |
Adopt 1 set of 2X-30 sliding vane rotary vacuum pump,be made by Nanguang Company in Chendu. Pumping speed: 30m3/h  Power:3KW |
|
Vacuum Measurement System |
One suit of digital compound vacuum gauge,be made by Zhenghua Company in Chengdu. Two vacuum chamber switch used. |
|
Cooling System |
3 sets of water separators Inlet and outlet pipe using two colors distinguish,the line specifications, neat, beautiful. |
|
Â
Â
Company Introduction:
"PuYuan Vacuum Technology" is a high-tech enterprise integrated by R&D, manufacture and after-sale service in vacuum coating industry.
With more than 20 years experience, our company has obtained ISO quality management system, CE certificate and a number of national patents such as Special Cooling device for PVD coating machine", "Coating auxiliary ion source "…
We strictly design, manufacturer and test each equipment according to ISO 9001:2008 quality management system to ensure the machine's high stability and quality.
Â
Our machines includes multi arc ion PVD coating machine, magnetron sputtering PVD coating machine, multi-function coating machine, electron beam optical film PVD coating machine, rolling vacuum coating machine, PVD coating machine for DLC film, evaporation PVD coating machine & UV spray line, in-line magnetron sputtering coating system, etc.
Â
We provide turnkey service, including coating film research, equipment's R&D, design, manufacturing, installation, debugging, trial production, personnel training and machine maintenance.
Â
Vacuum Brazing Furance for Vacuum Flask Seal Design Letters Patent
Â
Â
Â
Â
Â
For more factory information, welcome to contact with Lucky at any time!
 Double chamber vacuum brazing furnace machinery is consisted of vacuum chambers, heating system,work rest,pumping system,cooling system,electrical control system and so on.
One. Functional Characteristics:
1,Eequpment is double vacuum chamber,a set of pumping system configuration scheme. Two chambers can alternate work,increase production efficiency.Â
2,Vacuum cavity design for double hull,intermediate sandwich for water layer.
3,Electrical adopt PLC program,man-machine interface (touch screen)for operation control system.Can operate by manual ,semi-automatic and full-automatic operation.
4,Heating temperature and time can be set at random.
5,Monitoring system
1) Match digital display compound vacuum gauge.
2) Match temperature monitoring device automatically.
3) Match water automatic alarm device.
4) Match pneumatic automatic alarm device.
6,Automatic control system functions:
1) Vacuum system control and process shows.
2) The basic unit of work control and power show.
3) Security alarm and diagnostic display.
7,Work rest is fixed form,installed in the middle of the cavity.There are three layers(upper,middle and down) ,cup basket is placed in work rest.
8,Using small hydraulic forklift to load and unload the workpiece. (It need to prepare by customer)
Two. Main configuration and parameters:
Item |
Description |
|
|
Vacuum Chamber  |
Inner Chamber Size |
Φ1800×2200  mm/Optional |
Material |
All the material is using Stainless steel. Inner plating thickness≥10mm,Outer plating thickness≥5mm  Door flange thickness≥30mm  Chamber surface spray paint treatment, the paint color could decide by customer. |
|
Structure |
Horizontal,Double door structure. Double layer structure,interlayer for cooling water. Gate use spring hinge,can let the door seel uniform pressure. Door adopt cylinder clamping mechanism,decorate 2 sets. Pumping point was in top of the chamber and flashboard valve connection. |
|
Inspection Window |
There is a inspection window in the vacuum chamber door,can observe the inner working. |
|
Work Rest |
Using Q235 angle iron to make, total 3 layers. Match 6 cup basket,use stainless steel wire mesh production. |
|
Heating System |
Heating using stainless steel U type heat tube.The highest temperature achieved 550ºC in chamber. Heat tube distribution: Around the work rest.Up and  down,right and left,front and back,middle two layers. Match 8 thermocouples,respectively test 8 points  environment temperature in chamber. Using solid-state relay, temperature controller, PID control. Heating power about 90KW. |
|
Pumping System |
Diffusion Pump |
Adopt 1 set of KT-800 diffusion pump,be made by Zhenlong Company in Shenyang. Pumping speed: 30000L/S Â Power:13KW Match 1suit of water cold trap |
Booster Pump |
Adopt one set of RTO-1200 roots pump,be made by Cuiman Company in Shanghai. Pumping speed: 1200L/S Â Â Power:12KW |
|
Mechanical Pump |
Adopt 1set of HL-150 rotary plunger valve pump,be made by Shengong Company in Zhejiang. Pumping speed: 150m3/h  Power:11KW |
|
Holding Pump |
Adopt 1 set of 2X-30 sliding vane rotary vacuum pump,be made by Nanguang Company in Chendu. Pumping speed: 30m3/h  Power:3KW |
|
Vacuum Measurement System |
One suit of digital compound vacuum gauge,be made by Zhenghua Company in Chengdu. Two vacuum chamber switch used. |
|
Cooling System |
3 sets of water separators Inlet and outlet pipe using two colors distinguish,the line specifications, neat, beautiful. |
|
Â
Â
Company Introduction:
"PuYuan Vacuum Technology" is a high-tech enterprise integrated by R&D, manufacture and after-sale service in vacuum coating industry.
With more than 20 years experience, our company has obtained ISO quality management system, CE certificate and a number of national patents such as Special Cooling device for PVD coating machine", "Coating auxiliary ion source "…
We strictly design, manufacturer and test each equipment according to ISO 9001:2008 quality management system to ensure the machine's high stability and quality.
Â
Our machines includes multi arc ion PVD coating machine, magnetron sputtering PVD coating machine, multi-function coating machine, electron beam optical film PVD coating machine, rolling vacuum coating machine, PVD coating machine for DLC film, evaporation PVD coating machine & UV spray line, in-line magnetron sputtering coating system, etc.
Â
We provide turnkey service, including coating film research, equipment's R&D, design, manufacturing, installation, debugging, trial production, personnel training and machine maintenance.
Â
Vacuum Brazing Furance for Vacuum Flask Seal Design Letters Patent
Â
Â
Â
Â
Â
For more factory information, welcome to contact with Lucky at any time!
Stainess steel pump,Bronze Pump,Pump impeller
Wuxi Zhenzhe Electric Power Technology Co.,Ltd , https://www.zhenzhecasting.com