Why do towels stink when used for a long time?
1, summer, we use a towel to wipe the sweating oily skin, but did not immediately clean, the towel is easy to accumulate fat and dirt, a long time, it is easy to feel sticky, dry will produce odor; 2, if you The bathroom environment is not ventilated, and each time the towel is not completely wrung out, the water accumulates at the bottom of the towel and the lower edge will have a moldy phenomenon, and the towel will naturally have an odor or yellowish appearance.
What to do if the summer towel stinks?
1, when the highest temperature disinfection of towels, towels can be opened with boiling water for 10 minutes, and then cleaned with detergent, after washing it to get ventilated place to dry;
2, salt or alkaline detergent can be added to the water alkaline detergent or wash with salt, after washing and then rinse with water, you can improve the towel yellow or odor phenomenon;
3, with vinegar or soda powder to taste when cleaning towels can be added to the washing machine, two spoons of white vinegar and the amount of hot water, this time do not add any detergent, directly start the washing machine cleaning. After the cleaning process is finished, add a little laundry soap or soda powder and wash it again to remove most of the odors.
The above is a small series of popular solutions to the problem of towel odor, of course, there is a fastest, most effective and most trouble-free solution, that is, for a high-quality pure cotton towels, such as double expensive towels, use of cotton fabric, feel comfortable , Has excellent moisture permeability, can effectively alleviate the above symptoms!
Nickel Based Laser Cladding Powder
Ni base alloy powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has good wettability, corrosion resistance and high temperature self-lubricating effect, and is used in components with heat resistance, corrosion resistance and thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser cladding, the No means hardness of powder. Inconel 625 and 718 has good corrosion property under higher temperature, also widely used for laser cladding process.
Cobalt based Laser Cladding Powder
Cobalt-based alloy powder is the cemented carbide resistant to various types of wear and corrosion as well as high temperature oxidation. That is, the so-called cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based alloy is mainly composed of cobalt, containing a considerable amount of nickel, chromium, tungsten and a small amount of molybdenum, niobium, tantalum, titanium, Alloying elements such as lanthanum, and occasionally a class of alloys containing iron.
Co-based self-fluxing alloys have good high temperature performance and wear resistance and corrosion resistance, and are used in petrochemical power, metallurgy and other industrial fields where they are wear-resistant, corrosion-resistant and high-temperature resistant.
Iron based Laser Cladding Powder
The work pieces required for laser cladding and manufacturing in the actual industry are mainly carbon steel and cast steel. The Fe-based alloy is close to the base material in composition and has good wettability. The advantage of Fe base powder is lower cost and good wear resistant of cladding layer. As a result, it`s the most widely used for laser cladding process. It is suitable for parts that require local wear resistance and are easily deformed.
WC blended Laser Cladding Powder
Tungsten carbide blended with Ni alloy powder is the best choice for wear resistant work piece. This unique process can bring excellent wear, corrosion and high temperature resistant. Our blend powder can achieve different portion of WC from 35% to 60% without crack under suitable cladding parameter.
Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com