TIG welders - Maxstar 700 and Dynasty 700
High Power / High Accuracy - The Maxstar 700 meets your requirements for advanced DC TIG/STICK inverter power supplies, and its current output can even solder the largest workpieces. Upgrade to the Dynasty 700 with increased AC arc waveform control for superior control.
Other features of Dynasty 700:
Advanced AC square wave arc that controls the waveform.
AC balance control: 30%-99% anti-half wave - control arc cleaning.
AC frequency control: 20-400Hz - control arc width for better directional control, helping to create the desired arc and weld.
Independent AC current control: Set the current of the positive half wave and the reverse half wave respectively.
Average AC Current Control: Adjusts the calculated average current to maintain the formed positive half-wave, anti-half-wave current ratio, and AC balance and frequency.
Auto-line function:
Automatic connection for any input voltage (208-575V), easy to set up.
Threaded cable glands and torch adapters: for high current welding processes. Miller's patented technology uses a locking thread for a 1/4 turn cable joint that can be locked by simply inserting the plug and turning it clockwise.
Adjustable high frequency arcing parameters: start current, start time and start polarity (EP/EN) (Dynasty only). The starting arc is optimized according to the diameter of the tungsten electrode, the thickness of the substrate, and the shielding gas.
Program storage:
Four separate programs can be stored. Under various welding processes (straight/AC argon arc, hand arc welding), the established welding parameters can be stored, and the last program is automatically restored.
Welding power supply based on inverter technology: It provides users with the most advanced operation interface and excellent setting performance. The control of the output parameters is more precise than the traditional buttons and switches.
Automated Welded Interface Assembly: The 28-pin interface provides critical automation interfaces and functions for welding automation system integration.
Fan-On-Demand: Starts only when needed, reducing the amount of flying dust passing through the machine.
High-frequency arc start: non-contact arc start, avoiding tungsten and material contamination.
Lift-Arc: Provides a non-high frequency TIG arcing method.
Low OCV Stick: The no-load voltage can be as low as 10-15 VDC when the power supply is in standby.
Extraordinary arc characteristics: under all process conditions.
Medium frequency induction heating system - ProHeat 35 preheating and stress relief system
Medium frequency induction heating system, heating temperature and time controllable, small size, light weight, can be equipped with mobile trolley, flexible and convenient operation, is the ideal heating equipment for thick wall material welding.
Features:
Easy to install: Easy to install via cable connection plate.
Multiple outputs: Two insulated joints for air-cooled heating blankets or liquid-cooled cables.
Flexible movement: flexible movement by lifting lugs or optional trolleys.
On-board temperature control: Provides a manual program or a temperature program on an easy-to-learn interface.
Multi-control thermocouple input: The hottest thermocouple can be controlled during heating and the coldest during cooling to ensure uniform heating and quality.
Open Output Detection: To prevent system operation when the output socket (cable or protective socket) is not protected.
Cable Identification System: Identify the type of cable and limit the output to protect the cable and heating blanket.
Insulation failure protection (patented): Automatically shuts off the system when the power supply is shorted. A sensing line directly feeds back the failed state to the power supply.
Operator Coaching System: Provides help information to optimize the winding arrangement of the cable for best results.
Uniform heating: The heating zone can be heated evenly by induction heating. Above the set temperature, the surface of the workpiece is not damaged by concentrated conduction heat.
Fast heating: Due to the different heating methods used, the system heats up faster than conventional heating methods, reducing the heating cycle.
Improve the working environment: the welder does not have to be exposed to the fire, explosive gas and high temperature generated by gas or resistance heating, and the working environment is greatly improved.
High energy efficiency (more than 90% efficiency): more energy is transferred to the workpiece, reducing heating time and increasing efficiency.
Easy to set: Use heating blanket or flexible heating cable when heating, plus convenient and easy to use insulation blanket, easy to set up.
Advanced all-digital welding machine - Axcess system
For semi-automatic MIG-this welding machine combines inverter welding power supply with digital control technology to make semi-automatic pulsed MIG system application easier.
Features:
Auto-Line: The machine is automatically connected at any voltage (190-630V), ensuring a consistent output at the primary voltage fluctuations.
A separate 9-pin Palm handheld computer and a 9-pin RS232 serial communication port allow the welder to transfer data and download programs.
The Axcess four-wheel drive wire feeder has an operator interface that eliminates the need to return to the power supply for control.
MIG welding procedures include Accu-Pulse (patented), standard or adaptive pulse, conventional MIG and metal powder cored wire welding procedures.
The Accu-Pulse MIG process enables precise arc control even for large welds and space-constrained fillet welds.
SureStart technology achieves consistent arc start by precisely controlling the amount of current that is tailored to the specific wire and gas ratio.
Optional software: RMD (Regulated Metal Deposition), Palm OS-based Axcess (File Management) and WaveWrite (File Management + Waveform Program).
High Power / High Accuracy - The Maxstar 700 meets your requirements for advanced DC TIG/STICK inverter power supplies, and its current output can even solder the largest workpieces. Upgrade to the Dynasty 700 with increased AC arc waveform control for superior control.
Other features of Dynasty 700:
Advanced AC square wave arc that controls the waveform.
AC balance control: 30%-99% anti-half wave - control arc cleaning.
AC frequency control: 20-400Hz - control arc width for better directional control, helping to create the desired arc and weld.
Independent AC current control: Set the current of the positive half wave and the reverse half wave respectively.
Average AC Current Control: Adjusts the calculated average current to maintain the formed positive half-wave, anti-half-wave current ratio, and AC balance and frequency.
Auto-line function:
Automatic connection for any input voltage (208-575V), easy to set up.
Threaded cable glands and torch adapters: for high current welding processes. Miller's patented technology uses a locking thread for a 1/4 turn cable joint that can be locked by simply inserting the plug and turning it clockwise.
Adjustable high frequency arcing parameters: start current, start time and start polarity (EP/EN) (Dynasty only). The starting arc is optimized according to the diameter of the tungsten electrode, the thickness of the substrate, and the shielding gas.
Program storage:
Four separate programs can be stored. Under various welding processes (straight/AC argon arc, hand arc welding), the established welding parameters can be stored, and the last program is automatically restored.
Welding power supply based on inverter technology: It provides users with the most advanced operation interface and excellent setting performance. The control of the output parameters is more precise than the traditional buttons and switches.
Automated Welded Interface Assembly: The 28-pin interface provides critical automation interfaces and functions for welding automation system integration.
Fan-On-Demand: Starts only when needed, reducing the amount of flying dust passing through the machine.
High-frequency arc start: non-contact arc start, avoiding tungsten and material contamination.
Lift-Arc: Provides a non-high frequency TIG arcing method.
Low OCV Stick: The no-load voltage can be as low as 10-15 VDC when the power supply is in standby.
Extraordinary arc characteristics: under all process conditions.
Medium frequency induction heating system - ProHeat 35 preheating and stress relief system
Medium frequency induction heating system, heating temperature and time controllable, small size, light weight, can be equipped with mobile trolley, flexible and convenient operation, is the ideal heating equipment for thick wall material welding.
Features:
Easy to install: Easy to install via cable connection plate.
Multiple outputs: Two insulated joints for air-cooled heating blankets or liquid-cooled cables.
Flexible movement: flexible movement by lifting lugs or optional trolleys.
On-board temperature control: Provides a manual program or a temperature program on an easy-to-learn interface.
Multi-control thermocouple input: The hottest thermocouple can be controlled during heating and the coldest during cooling to ensure uniform heating and quality.
Open Output Detection: To prevent system operation when the output socket (cable or protective socket) is not protected.
Cable Identification System: Identify the type of cable and limit the output to protect the cable and heating blanket.
Insulation failure protection (patented): Automatically shuts off the system when the power supply is shorted. A sensing line directly feeds back the failed state to the power supply.
Operator Coaching System: Provides help information to optimize the winding arrangement of the cable for best results.
Uniform heating: The heating zone can be heated evenly by induction heating. Above the set temperature, the surface of the workpiece is not damaged by concentrated conduction heat.
Fast heating: Due to the different heating methods used, the system heats up faster than conventional heating methods, reducing the heating cycle.
Improve the working environment: the welder does not have to be exposed to the fire, explosive gas and high temperature generated by gas or resistance heating, and the working environment is greatly improved.
High energy efficiency (more than 90% efficiency): more energy is transferred to the workpiece, reducing heating time and increasing efficiency.
Easy to set: Use heating blanket or flexible heating cable when heating, plus convenient and easy to use insulation blanket, easy to set up.
Advanced all-digital welding machine - Axcess system
For semi-automatic MIG-this welding machine combines inverter welding power supply with digital control technology to make semi-automatic pulsed MIG system application easier.
Features:
Auto-Line: The machine is automatically connected at any voltage (190-630V), ensuring a consistent output at the primary voltage fluctuations.
A separate 9-pin Palm handheld computer and a 9-pin RS232 serial communication port allow the welder to transfer data and download programs.
The Axcess four-wheel drive wire feeder has an operator interface that eliminates the need to return to the power supply for control.
MIG welding procedures include Accu-Pulse (patented), standard or adaptive pulse, conventional MIG and metal powder cored wire welding procedures.
The Accu-Pulse MIG process enables precise arc control even for large welds and space-constrained fillet welds.
SureStart technology achieves consistent arc start by precisely controlling the amount of current that is tailored to the specific wire and gas ratio.
Optional software: RMD (Regulated Metal Deposition), Palm OS-based Axcess (File Management) and WaveWrite (File Management + Waveform Program).
Air condition ventilation equipment
hisense , https://www.hisensegroups.com