The turbofan new high-pressure turbine disk is the first in China to use high-temperature powder metallurgy in the prototype production, which has high strength, high toughness and poor cutting performance. The first air-driving workshop of Liyang is also the first to process this new material; especially the grooving of the gutter, there is no relevant technical information available for reference in China. Choosing the right tool material, designing a reasonable broach structure, and determining the scientific broaching process plan are all key to the process technology. Starting from the trial of the new turbofan machine, the Liyang Pan-axis workshop started the research on the high-speed turbine disk blade grooving process of powder metallurgy materials.
After repeated research and analysis, according to the actual conditions at that time, we chose to use the test piece first, then use the process test piece to test the process, and finally form the technical route of the turbine disk, and put forward more than 10 kinds of process test plans. The process test began in March 2004. However, the process test work encountered difficulties at the beginning. When the test piece was used for trial processing, the tester first used the turbojet engine to produce the shaped broach for trial pulling. As a result, just after several gutters, the gutter size appeared. Changes, razor wear and broaching angles.
Through trial and error, the broach structure was improved, the broaching allowance was redistributed, and the broaching process was optimized by carrying out research on broach selection and heat treatment. The problems were solved one by one. On the basis of the basic solution to the process technology, Yiyang Liyang began trial broaching with the test piece on June 13th, and completed the test on June 16th. The test was considered successful after the review. On the afternoon of the same day, the parts were officially broached. After the broaching was completed on the afternoon of June 19, there was no abnormality in the broaching process. All the dimensions and technical conditions were all qualified after comprehensive measurement.
Zowell 2 tons Electric Towing Tractor is a warehouse machine used for various materials transportation. It can move heavy and numerous materials efficiently with load carriers behind, and widely used in logistics, airport, textile industry, etc.
Zowell electric tractor is featured with compact size, strong power, convenient maintenance, safety and stability. AC motor, active stability and OPS system enable Zowell XT tractors to move materials quickly, smoothly and safely. Our battery side pull design, quick release tow hitch and regenerative braking function significantly improve the working efficiency and operating experience.
The standard capacity Zowell towing tractor ranges from 2 ton to 6 ton with many additional options such as half/full closed cabin, PU wheel, rear solid tire, electric power steering, front bumper to meet any needs. If you need bigger capacity or other customized option, please contact us so that we can provide you best solution with professional knowledge.
Suzhou Pioneer Material Handling Equipment & Technology Co., LTD was established in 2005. The factory is located in Suzhou Wuzhong district, Xujiang industrial park.Zowell is the English trademark and its Chinese trademark is pronounced zhuoyi. The company is a national high-tech enterprise which has been awarded the the title of national intellectual property superiority enterprise and it has its own Suzhou engineering technology research and development center.
electric tow trucks,full electric towing tractor,electric tow tractor truck,Crown electric tow tractor
Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.zowellforklift.com