In the normal operation of the CNC cutting machine, the operator can successfully complete the cutting work by using the cutting point continuous cutting function of the cutting machine. The method is: When the operator wants to stop working halfway through cutting, and wants to save the breakpoint at the cutting site, press s to stop when running to the freeway segment, and then press the enter key to exit the cutting operation. At this point the breakpoint data is System memory. At this time, the operator should remember the coordinate values ​​in the X and Y directions, and then shift to the idle operation to move the cutting machine in the opposite direction until the coordinate values ​​in the X and Y directions are the same as the above-mentioned coordinate values, and the signs are positive and negative. Different places (this location is the starting point of the program, but also the origin of the steel plate) can be shut down. The next time you start the work, enter the letter C at the corner of the input steel plate to continue the last interrupted cutting operation.
According to the above operation method, the operator must first control the cutting machine to return to the starting point of the program (or the origin of the steel plate) in order to stop working halfway, so that the operator can continue cutting at the next working time. Obviously, if the cutting machine abruptly fails during normal operation (eg, power failure, servo system failure, control computer crash, etc.), because it has no power off memory function, the operator cannot bring it back to the starting point of the program (or steel plate The origin).
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /
A hammer mill is a mill whose purpose is to shred or crush aggregate material into smaller pieces(below 5mm) by the repeated blows of little hammers. These machines have many sorts of applications in many industries.
The screenless hammer mill uses air flow to separate small particles from larger ones. It is designed to be more reliable, and is also claimed to be much cheaper and more energy efficient than regular hammermills. The design & structure of the hammermill is always determined by the end use.
Wood Hammer Mill,Wood Waste Grinder Machine,Hammer Mill Shredder,Wood Hammer Crusher
Shandong Kingoro Machinery Co., Ltd , http://www.kingoromachinery.com