Temperature impact test box product introduction

Temperature impact test box product introduction

Temperature impact test box detailed material description:

First, it is divided into three parts: low temperature zone, high temperature zone, and test zone. There is no shortage of activities in the test sample layout and test zone, and a common heat storage and cold storage structure is used. A strong cooling hot air channel switching method is introduced into the test zone to complete the hot and cold temperature attack test.

Second, load wiring test components can be added to the test hole;

Third, large-scale planning of black LCD touch-control microcomputer control system, control simple and easy to understand, shape and insight into operation;

Fourth, the entire blockage of imports to shorten the environmental protection refrigerant, plate-type cold and heat exchangers and binary ultra-high temperature refrigeration system;

Fifth, with LAN communication interface, remote control with the tail computer, easy to use;

Sixth, it is possible to self-determine the obedience of three different conditions of low temperature, high temperature, and cold/hot attack. When performing the premise of cold and hot attacks, you can choose 2 or 3 slots to listen to, and have the upper and lower temperature actuators to listen to;

Seventh, the pre-cooling, warm-up, and standby listening can be automatically postponed during the scheduled start-up time;

Eighth, can set the number of rounds and defrost times, automatic (manual) defrost;

Ninth, the controller has a friendly man-machine interface, measures are set to be convenient, and the Defects and Defects Cleanup show is complete.

The temperature impact tester has full control of the application of computer control, is a self-developed program, has a sophisticated operating interface, the user's manipulation and monitoring are more simple and intuitive, adhere to the function can make you keep running in the current form of the pace , Can temporarily change the value of this step, can set the time parameters on the screen, so that cooling, heating, lifting blue transfer switch, according to the set value to actively stop.

Surface Treatment Production Line

For metal castings, the commonly used surface treatment methods are mechanical grinding, chemical treatment, surface heat treatment and spraying surface. Surface treatment is to clean, sweep, deburr, degrease and deoxidize the surface of the workpiece.In the process of processing, transportation and storage of the workpiece, the surface is often with oxide scale, rust mold residual molding sand, welding slag, dust and oil and other dirt.To coating can firmly adhere to the surface of workpiece, the workpiece surface before coating must be clean, otherwise, not only influence the adhesion and corrosion resistance of coating and metal, but also can make the matrix metal under even with protective coating can also continue to corrosion, the coating peeling, affect the mechanical properties and service life of the workpiece.Therefore, the surface treatment of the workpiece before painting is an important guarantee and measure to obtain a good quality protection layer and extend the service life of the product.

Powder Coating Line,Powder Spraying Machine,Surface Treatment Production Line,Electrostatic Powder Spraying Equipment

Foshan Youngmax Machine Co.LTD , https://www.ymaxmachine.com