The LED industry is optimistic next year. Many Taiwanese companies are worried that mainland manufacturers will be strongly supported by the government and will replace Taiwanese manufacturers, especially the midstream packaging factories with lower technology thresholds. However, mainland manufacturers still have not left the Chinese market, and the mainland LED packaging factory only supplies Chinese domestic lighting. International lighting companies that focus on quality, as well as demanding higher TV backlights, prefer Taiwanese and Korean products.
The LED packaging industry is strong and weak. The LED upstream epitaxial plant has been consolidated in the past two years, and this year, Sanan has reached its peak. Was asked if this consolidation trend extends down to the midstream packaging factory? Ye Weifu, chairman of Everlight, said that 2014 will not appear. He analyzed, mainly because the existing manufacturers are strong, weak and weak, and they are unable to play a comprehensive effect; and the investment threshold of the packaging factory is low, unlike the capital intensive of the epi-plating factory, so small The manufacturer will continue to exist next year and will be eliminated after waiting for a period of loss.
In addition, the technical threshold of packaging is also low. In recent years, mainland China has frequently digged talents. The industry is worried that Taiwanese factories will soon be replaced by the mainland.
Ye Qifu is optimistic that the entire LED industry must be competitive, it is the cooperation between upstream and downstream, not just the package segment is strong. He pointed out that there are many upstream epitaxial factories in the mainland, but there are not many strong ones. Although the mainland packaging factories have a rising trend, the current orders are limited to Chinese lighting brands, and international lighting manufacturers are still placing orders.
Even mainland TV brands such as Haier, Konka, Chuangwei, etc. use more LEDs in Taiwan and South Korea, mainly because of the higher level of backlight technology.
Taiwan’s out of differentiation, Chairman of the Board of Directors, Jian Feng, also said that Taiwan’s products have technological advantages and can make differentiated products. For example, there are three major products in the next round, which can make a clear difference with the mainland epitaxial wafer factory, including flip chip packaging, high voltage LED, and package-free chips. These new technologies save cost and have high gross margin because they do not require wire and leadframes or can replace the entire power supply with a single driver IC.
Matting Agent For Plastic Coatings
Description
1, Matting Agent popular used for the matte plastic coatings. It is synthetic amorphous micronized precipitated silica appearing as white powder and for both solvent-based and water-based system. Advanced matting efficiency is achieved by using silica with high pore volume and by fine control of the particle size and particle size distribution. It provides a superior matting and flatting, excellent coating appearance and transparency, cost efficient, effective anti-settling agent and easy dispersion, smooth, abrasion resistant ï¬lms of high surface quality. Silica Matting Agent reduce the gloss of a variety of products including coatings, paints, inks, lacquers, varnishes, while providing lower viscosity and better flow capability.
2, Silica Matting Agent suitable used for plastic coatings. It provided high matting efficiency, excellent coating appearance and better transparency. As well as low oil absorption, easy dispersion and smoothly touch with minimal impact of viscosity.
Feature
1, Easy to disperse.
2, High Matting Efficiency.
3, Excellent Transparency.
4. Excellent suspended performance.
5, Excellent mechanical properties and chemical properties.
6, Good scratch resistance.
7, Excellent Hand feeling.
Application
|
1, Plastic Coating, 3C Coating, Metal Coatings, Elastic Coatings. |
|
2, Industrial Coating, Metal baking Coating, Decorative Coating. |
|
3, Automotive Coating, Car Coating, Motorcycle Coating, Truck Coating, Bicycle Coating. |
|
4, Printing Inks, Gravure Printing Ink, Offset Printing Ink, Screen Printing Ink, Printing Packing Material. |
|
5, Wood Coating, PU Wood Coating, NC Wood Coating, UV Wood Coating. |
Advantage
|
1, We focus on silica matting agent market about 25 years. Know exactly the customer`s requirements, have most experience about this silica products, provide the best service to the customers. |
|
2, We have strict control of the batch quality, the physical index and performance are strictly tested before delivery. Will ensure that stable products of different batch. |
|
3, We are the reliable supplier for many countries and some International customers, such as AkzoNobel, Valspar, Nippon Paints, Dgl Camel, and PPG. |
|
4, Currently, Many paint/Coating manufacture will choose Chinese Products. To be honest, Chinese Product also have stable quality and the same performance VS the International products.The other things, Cost-effective for the end users. |
Matting Agent For Plastic Coatings,Plastic Coatings Chemical,White Powder Matting Agent,High Matting Effect Matting Agent
Guangzhou Quanxu Technology Co Ltd , https://www.silicamattingagent.com