Special considerations for three roller brakes

pay attention:

1: All the above operations should be performed with power off, and the system's protective ground wire should be properly connected and securely connected.

2: When the selected equipment is used outdoors, a concrete installation platform with a height of 100mm to 200mm should be installed at the equipment installation site to prevent moisture; at the same time, rain shelters such as sun sheds should be installed above the equipment. It is strictly prohibited to directly place the equipment Placed for use in an open air environment;

Instructions for use of three roller brake

1 Make sure the equipment is working properly before putting it into use

2 During the reading and writing period, it is strictly forbidden to squeeze, lean, and push the brake lever before the traffic light turns green, so as not to affect the normal operation of the equipment.

3 When the equipment is not in use, it is strictly forbidden to sit and press hard on the brake lever, so as not to cause unnecessary damage to the brake.

4 It is recommended not to use the equipment directly in the open, humid or corrosive environment, so as to prevent the service life of the equipment due to rain, moisture or corrosive matter (if it is used outdoors, it must be equipped with rainproof facilities such as sun sheds)

5 When passing, the passer only needs to push the brake lever gently, instead of pushing the brake lever strongly during the pass.

pay attention:

1: Do not use this machine when there is lightning, to prevent damage to the gate

2: Ensure that the protective ground of the system is connected reliably to prevent accidents such as injury to personal safety