Metal Tube Rotameter/Liquid Flow Meter Ht-0426

Model NO.: HT-0426
Measurement Range: Water(20oc):6-200000L/H
Ratio of Range: 10:1 for Standard, 20:1 for Special
Media Temperature: Standard: -80oc~140oc
Temperature of Operation Environment: H1:-40oc~100oc, H2:-80oc~250oc
Connection Pattern: Standard Flange
Cable Interface: M20*1.5, Pg11, 1/2 NPT
Power Supply: Standard:24VDC (10.8VDC-36VDC)
Output Signa: Standard: Two Wires System4~20mA
Protection Level: IP65
Transport Package: Standard Exporting Packing
Origin: Prc
HS Code: 9026100000
Metal tube rotameter is a kind of flowmeter which is suitable for measuring flow of liquid and gas through floater movement inside metal tube. Data of flow can be read from dial scale thanks to magnetic coupling to act on signal transmitter. Output of electrical signal is 4-20mA.
The rotameter can be used in any harsh working environment due to its shatter-proof, pressureproof, temperature-resistant and corrosion-resistant characteristics.

1. Features of the product
1. Double lines LCD, showing both instantaneous and accumulated flow.
2. More stable signal output: Construction of single axis and non-touching magnetic coupling.
3. Fully metal-made body, suitable for high temperature, high pressure and corrosive media.
4. Can be used even in flammable, explosive and harsh working environments.
5. Power supply: Two-wire system, battery and AC for selection
6. With functions of data recovery, backup and power failure protection
7. New design for less pressure loss.


2. Technical data
Measure range Water (20ºC) 6L to 200000L/h,
Air (0.1013MPa 20ºC) 0.05m3 to 4000m3/h
Ratio of measuring range 10:1 for standard,  20:1 for special 
Accuracy  1.5 for standard, 1.0 for special 
Temp of mediums  -80ºC to 120ºC for standard type, 400ºC for high temperature type, ≤85ºC for PTFE lining type 
 
Temp of working environment
 
-40ºC to 120ºC 
Viscosity of mediums DN15: η≤5mPa.s(F15.0-F15.4) η≤30mPa.s(F15.5-F15.9) 
DN25:η≤250mPa.s DN50-DN150:η≤300mPa.s
 
LCD display  LCD display with backlight can show instantaneous flow, accumulated flow (positive, negative and net), velocity, working status and etc. 

Filter Press

Sludge Dewatering Recessed Plate Filter Press

Chamber filter press takes filter cloth as the medium to separate solid and liquid. It is a separating machine with wide rang of particle size. The filter cloth spreads in a filter board surface, it is supported by the swelling groove of filter board, when the filter board is clamped, filter cloth turns to sealing materials, and the cavity between every two filter board forms a separated filter room. During the filter processing, the materials come through the central opening into filter room, the filtrate flow by the feeding pressure, flow out of the filter board after converged. Chamber filter press can be divided into two types according to filtrate discharging ways: open channel flow and under channel flow.

Filter Press

Advantages:

1.Automated operation,Stable structure, no labor required;
2.Automatic control, continuous operation,High cycle life;
3.Easy management, easy maintenance,low cost.

Applications:

Sludge dewatering for wastewater treatment, Foodstuff, Chemicals,Slaughter, Animal husbandry,Pharmaceutical, Electroplating, Papermaking, Leather, Printing and dyeing, Mining, Medicine, etc

Sludge Dewatering Filter Press,Filter Press,Sludge Dewatering Plate Filter Press,Screw Filter Press,Sewage Filter Press

YIXING HOLLY TECHNOLOGY CO.,LTD. , https://www.watertreatment-machine.com

Posted on