Small meteorological stations have an important role in monitoring weather warnings and can better prevent all kinds of hidden disasters. However, while the use of small weather stations has increased, the maintenance and technical support of weather stations are very worth considering. The quality of maintenance guarantees has a direct impact on the observation quality of weather stations. Therefore, the maintenance of small weather stations and technical guarantees will be discussed in a focused way. It is hoped that this method can greatly improve the maintenance and protection technologies of weather stations. It is more real and effective, and it can provide the most reliable weather monitoring data for local residents.
Because of the relatively remote, installed cables, etc., it is likely to be destroyed by man-made or wild animal damage. Therefore, if the temperature and precipitation data collected and analyzed by the small weather station are abnormal, it is necessary to find the data abnormally in time. Cause, and troubleshoot the equipment failure and correct it. If it is a fault such as a cable or a line break, it is necessary to do a good job of connecting the lines first, instead of blindly doing a fault analysis.
In addition, sensors for small weather stations are easily covered with dust due to weather, etc. Therefore, it is necessary to regularly clean dirt and other materials accumulated on or around the temperature sensor protection cover to maintain the sensitivity of the sensor. For the maintenance of the air pressure sensor, it is necessary to check the vent nozzle, whether it is blocked or contaminated. Every month, the inside of the buffer box molecular sieve should be taken out, dried with a special method and then sealed back.
For a small weather station cable and other lines, more mice are normal conditions. Always check the route for rat bites, and if it is found to perform maintenance and repairs in a timely manner, ensure that the cables are installed as required.
Add WeChat more and more professional just waiting for you to come: 
Is it Time to Change Your Windshield Wiper Arm?
All windshield wiper arms have a hinge at the base that allows the arm to flex as it follows the curvature of the window. If the wiper skips over certain spots, even with a new blade, chances are the hinge is binding from corrosion. It`s most common on rear window wipers since they`re used less often.
You can oil the hinge, but that`s just a temporary fix-the corrosion and binding usually return. To fix the problem permanently, replace the wiper arm (available at an auto parts store).
What you`ll need to replace your windshield wiper arm:
- Socket/ratchet set
- Flat-blade screwdriver
Now you`re ready to get started!
Plug-In Wiper Arm,Rear Window Wiper Arm ,Rear Windscreen Wiper Arm,Front Wiper Arm
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com