Giving you the parts of an IR horizontal single-stage single-suction centrifugal pump, can you assemble them? Or to you a complete IR horizontal single-stage single suction centrifugal pump, you will disassemble it?
IR horizontal single-stage single-suction centrifugal pump should be checked before assembly of parts have no affect the assembly defects, and scrub clean before assembly.
1, will be around the connecting bolts, plug, etc. were tightened in the corresponding parts.
2, the 0 ring, paper pad, felt, etc. were placed on the corresponding parts.
3, the seal ring and packing, packing ring, packing gland, etc. are installed into the pump cover.
4, the rolling bearing mounted on the shaft, and then loaded into the suspension, and then close the gland, bearing pressure on the rolling, and set the shaft on the connecting bolts.
5, the shaft sleeve on the shaft, then the pump cover mounted on the suspension, and then the impeller, stop pad Wai, impeller nuts, etc. installed and tightened.
6, Finally, the above components into the pump body, and tighten the pump body, pump cover bolts.
In the above assembly process, some small parts, such as flat key, gear oil pan, gear shaft, o-ring seals and other easy to escape or wrong order, should pay special attention.
Know the order of the pump assembly, demolition is also much easier, pump disassembly order can basically reverse the order of the assembly.
This is one of the biggest characteristics of stretch film packaging. With the strong winding force and retraction of the film, the product is compactly and fixedly bundled into a unit, so that the scattered small pieces become a whole, even in unfavorable environments, the product does not have any looseness or separation, and is not sharp and sharp. The edges and stickiness to avoid damage.
hand stretch film,Machine stretch film,color stretch film,mini stretch film,Jumbo stretch film
BILLION PLASTIC MANUFACTURING CO.,LTD, JIANGMEN , https://www.jmtrashbag.com