Temperature range:-35C to 5C
HTSL series low temperature screw chiller is widely adopted in manufacturing process in industries such as non-ferrous smelting, chemical and pharmaceutical, petroleum chemistry, grain and oil, food and beverage, mechanical, electric, air separation, etc.
Unit main parts include Semi-hermetic screw compressor, oil separator, condenser, economizer, evaporator and control system.
Design features:
Coolant temperature range -35C to 5C
High efficient semi-hermetic twin-screw compressor adopted, high COP, steady performance and long service life.
Compressor stepped capacity control, minimize starting current and impact to grid.
25%-100% continuous capacity control, ensuring compressor full performance, saving running cost for customers.
High accuracy touch screen and imported PLC controller adopted.
Multi-protection function: Compressor discharge over temperature, motor over temperature, anti-freezing, over current, phase sequence, high/low pressure, flow switch.
Mass Storage PLC, allows permanent reservation of more than 100 fault records, precisely monitors unit running state.
Pass word setting, avoids unit from shut down or damaged by accidental factor.
Control components including thermal expansion valve, solenoid valve, check valve are supplied by international brand, ensuring steady and efficient running under wide range of working condition.
Units are completely tested and operated at full load, leave factory with refrigerant, can be start once water and power is connected.
Compressor with built-in exhaust pot silencer ensures low noise running.
Corrosion-resistance water system upon request.
Refrigerant option: R22, R407C, R404A, R134A and R410A.
Â
| model[HTSL-***] | 80AD | 100AD | 120AD | 140AD | 160AD | 180AD | 200AD | 240AD | 280AD | |||
| nominal cooling capacity |  -10ºC | kw | 128 | 170 | 184 | 224 | 246 | 292 | 336 | 402 | 478 | |
|  -20ºC | 86 | 112 | 122 | 150 | 164 | 194 | 224 | 266 | 318 | |||
|  -30ºC | 64 | 84 | 90 | 112 | 122 | 144 | 166 | 200 | 236 | |||
| max power consumption | kw | 87.2 | 106.4 | 120 | 142 | 158 | 178.4 | 203 | 249 | 285 | ||
| power source | Â | 3PH-380V~415V/ 50HZÂ Â | ||||||||||
| refrigerant | type | Â | R22/R404A | |||||||||
| charge | kg | 62 | 78 | 94 | 108 | 124 | 140 | 154 | 186 | 218 | ||
| control | Â | thermostatic expansion valve | ||||||||||
| compressor | type |  | semi-hermetic screw |  | ||||||||
| motor power | kw | 40×2 | 50×2 | 55×2 | 67×2 | 73×2 | 82×2 | 95×2 | 115×2 | 133×2 | ||
| start mode |  | Y-Δ | ||||||||||
| capacity control | % | 0-25-50-75-100 | ||||||||||
| evaporator | type | Â | shell and tube (ss plate heat exchanger) | |||||||||
| coolant volume |  -10ºC | m 3 /h | 22 | 29.2 | 31.6 | 38.5 | 42.3 | 50.2 | 57.8 | 69.1 | 82.2 | |
|  -20ºC | 14.8 | 19.3 | 21 | 25.8 | 28.2 | 33.4 | 38.5 | 45.7 | 54.7 | |||
|  -30ºC | 11 | 14.4 | 15.5 | 19.3 | 21 | 24.8 | 28.5 | 34.4 | 40.6 | |||
| water pressure drop | kPa | 45 | 43 | 43 | 41 | 42 | 45 | 42 | 46 | 48 | ||
| pipe connection | inch | 4 | 4 | 5 | 5 | 5 | 6 | 6 | 8 | 8 | ||
| condenser | type | Â | air cooled type high efficiency finned cooper tube | |||||||||
| fan information | type | Â | big volume & low noice axil fan | |||||||||
| motor power | kw | 1.2× 6 | 0.8×8 | 1.2× 8 | 0.8×10 | 1.2× 10 | 1.2× 12 | 0.8×16 | 1.2× 16 | 1.2× 16 | ||
| air volume | m 3 /h | 60000 | 75000 | 90000 | 105000 | 120000 | 135000 | 150000 | 180000 | 210000 | ||
| safety devices |  |  inner thermostat for compressor motor, unit overload relay, high and low pressure switch, freeze protection thermostat,reverse phase protection relay, discharge gas thermostat, flow switch, | ||||||||||
| dimension | length | mm | 3200 | 4000 | 4800 | 5500 | 6200 | 6800 | 7800 | 8500 | 10500 | |
| depth | mm | 1950 | 1950 | 1950 | 1950 | 2000 | 2000 | 2200 | 2200 | 2200 | ||
| height | mm | 2200 | 2200 | 2200 | 2200 | 2200 | 2200 | 2350 | 2350 | 2350 | ||
| net weight | kg | 2600 | 3050 | 3450 | 3800 | 4200 | 4450 | 4850 | 5300 | 5550 | ||
| running weight | kg | 2900 | 3350 | 3750 | 4200 | 4600 | 4950 | 5350 | 5900 | 6150 | ||
| The above specifications is according to the following design conditions: 1. Condensing temperature 50ºC. 2. Cooling air inlet/outlet temperature 30ºC/38ºC. We reserve the right to modify the specifications without further notice. |
 | |||||||||||
We are a manufacturer of silicone products in China and Silicone Car Key Cover is our main products. Among silicone car key cover, Kia silicone car key cover have a good selling in worldwide markets. Our silicone raw material is 100% silicone and haven`t add other impurities. Of course we always use SGS silicone raw material for our silicone car key cover. What`s more we often spray a layer of silicone oil on the surface of car key cover, after this, when silicone car key cover fall on the ground, silicone oil is dust proof, waterproof and have a good touch. What`s more, we have many color options about Kia silicone car key cover, you can choose the color which you like. As for our company, we have many machine and our own inventory to provide enough store; We also have professional team to design and open the mold, so OEM is welcome. To guarantee the quality of our silicone car key cover, we have a strict production process: 1:prepare the real material 2:mix the material and the color material 3:cut them up for one Kia silicone key cover that need the material .4:vulcanizing them to become the car key cover shape ,5:cut off the extra silicone ,6:Spraying oil the key button ,7 :spray the oil to make the case touch is smooth ,8 :roast it to dry,9: Assembly and inspection ,10 :packing the goods.
Up to know, we only have Kia silicone car key cover without logo. Its technology is debossed. If you want to make your own design or want to add car logo on the silicone car key cover, oem is welcome. We can open the mold for Kia silicone car key cover.
Kia Silicone Key Cover,Kia Silicone Key Fob Cover,Kia Silicone Key Case,Kia Key Cover
Shenzhen Beautiful Earth technology Co.,Ltd , http://www.siliconekeyfobcover.com