China's first 24-speed transmission matching main engine plant, all-aluminum alloy housing 6DS bus transmission is favored by users, AMT heavy-duty transmission is put into small-batch production... With multi-position, light weight, automation, and energy-saving products advanced to market , Fast rely on leading development to achieve the goal of seizing the commanding heights of the industry development.
In recent years, by actively adapting to market demands, Fast has actively guided the market and continuously expanded its leading development and market leadership, achieving remarkable results. In 2001, Fast was optimistic about the good development prospects of China's auto market, boldly invested 130 million yuan in the transformation of advanced numerical control equipment, and made great changes in the mechanism, effectively mobilized the enthusiasm of the employees, and then the company’s product sales increased by 150. %; In 2004, the market ushered in blowouts, and China’s heavy-duty trucks were in short supply. However, Fast had met the market demand in the first two years of technological transformation; in 2005, the automobile market was at a low ebb, but Fast did not decline as a result. However, it was the spirit of cohesion that set up a new factory in the Xi'an High-tech Zone. In the same year, in the face of the critical period for the transition of the commercial vehicle II emission standard to the State III, the company made decisive decisions and took the lead in organizing the development of a more fuel-efficient and smoother 12-speed gear. 16-speed multi-gear series heavy-duty transmission. Once the products are put on the market, the demand will rise one after another and take the lead in the market. In 2007, the company took the lead in the development of new 8-speed transmissions and small-speed 8-speed transmissions in accordance with national requirements for energy conservation and environmental protection, and improved fuel efficiency. It has timely satisfied the needs of construction vehicles, buses, and low-speed trucks, and it has The new growth point in the city.
Faced with the financial crisis since 2008, many manufacturers slowed down the pace of new project construction, but Fast's forward-looking vision continued to accelerate the pace of large-scale technological transformation and new product development, leading to the development of 12 files, 16 files, and 20 files. , 6DS, AMT, and a series of new transmission products that adopt lightweight design of all-aluminum alloy housings quickly occupied the commanding heights of energy-saving products, meeting the needs of heavy-duty commercial vehicle users for multi-speed, light-weight transmissions, and becoming a leader in the development of the industry. banner. In the following years, the heavy truck market in China ushered in the peak period of history. When engines, axles, and other components were successively in short supply, the only thing that was not lacking was the transmission product. In 2010, Fast relied on its solid strength to make transmission sales. It has reached over 850,000 units, and has achieved sales revenue exceeding 10 billion yuan for two consecutive years. Through precise understanding of the market development trend, Fast has enabled companies to lead the heavy-duty truck transmission industry with significant advantages in the fluctuating market, and continues to maintain a high-speed development trend. At present, the company has formed an annual production capacity of 1 million automobile transmissions, 50 million gears, and 100,000 tons of automotive forgings. Leading development made Fast's operating indicators rank first in China's gear industry for ten consecutive years, and annual sales of heavy-duty vehicle transmissions have ranked first in the world for six consecutive years, becoming a veritable giant in the Chinese auto parts industry.
The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
PVC furniture edge banding is relatively light, which is relative to metal and plexiglass. The reason for the lightness is not because it is a polymer compound, but because they are organic compounds, which are composed of carbon, hydrogen, oxygen, and chlorine. And other lighter elements.
The material of pvc furniture edge banding is plastic, which is easy to process. Plastic has plasticity, that is, it deforms after heating or pressurizing, and maintains its original shape after the temperature drops or the pressure disappears. It can be processed into edge bands of their respective shapes by extrusion and other methods, such as T-shaped edge bands, H-shaped edge bands, D-shaped edge bands, V-shaped edge bands, I-shapes, and so on.
pvc furniture edge banding is of high quality and low price, and the price of plastic is far less than that of metal.
PVC Edge Banding,Edge Banding Pvc,Pvc U Trim Edge Banding,Pvc Edge Banding Trimmer
Henan Shunbang Chemical Industry CO.,Ltd , https://www.sbcpe.com