Recently, the new pile-driving machine-JZW90 electric crawler type thread pile machine, SPR650 three-axis deep-drilling rig and new building material machinery YZP150-8 disk-turning brick machine have been successfully developed in Fangyuan Group.
It is understood that the JZW90 threaded pile driver was developed by Fangyuan Group in cooperation with well-known domestic research institutions and it was completed in 4 months. The utility model is characterized in that the drill pipe is threaded and the hole is threaded, which can reduce the pouring amount of the concrete during construction, greatly enhance the bearing capacity of the foundation, and the safety and stability of the construction are remarkably improved, and the electrical control equipment of the pile driver adopts frequency conversion control. The threaded pile hole is formed completely. The pile driver also pays attention to the humanized needs in the control room design, which makes the working environment of the operator more refreshing.
The SPR650 three-axis deep-drilling rig is an advanced ground-based processing equipment that can be used for dams and civil buildings to prevent leakage. The pile driver is completely developed and produced by Fangyuan Group. It has high technical content and has high cost performance compared with similar foreign products. It can completely replace the construction of similar products imported from abroad and fill the blank of domestic products in the same industry.
At present, JZW90 threaded pile driver, SPR650 three-axis deep agitating boring machine and YZP150-8 disk-turning brick press have all been successfully tested. After testing, all technical indicators fully meet the design requirements.
It is understood that the JZW90 threaded pile driver was developed by Fangyuan Group in cooperation with well-known domestic research institutions and it was completed in 4 months. The utility model is characterized in that the drill pipe is threaded and the hole is threaded, which can reduce the pouring amount of the concrete during construction, greatly enhance the bearing capacity of the foundation, and the safety and stability of the construction are remarkably improved, and the electrical control equipment of the pile driver adopts frequency conversion control. The threaded pile hole is formed completely. The pile driver also pays attention to the humanized needs in the control room design, which makes the working environment of the operator more refreshing.
The SPR650 three-axis deep-drilling rig is an advanced ground-based processing equipment that can be used for dams and civil buildings to prevent leakage. The pile driver is completely developed and produced by Fangyuan Group. It has high technical content and has high cost performance compared with similar foreign products. It can completely replace the construction of similar products imported from abroad and fill the blank of domestic products in the same industry.
At present, JZW90 threaded pile driver, SPR650 three-axis deep agitating boring machine and YZP150-8 disk-turning brick press have all been successfully tested. After testing, all technical indicators fully meet the design requirements.
A railgrinder (or rail grinder) is a maintenance of way vehicle or train used to restore the profile and remove irregularities from worn tracks to extend its life and to improve the ride of trains using the track. Rail grinders were developed to increase the lifespan of the tracks being serviced for rail corrugation. Rail grinding is a process that is done to stop the deformation due to use and friction on railroad tracks by removing deformations and corrosion.
Rail Grinder,Rail Grinding Machine,Geismar Rail Grinder,Loram Rail Grinder
Shenyang Lubang Railway Maintenance Machinery Co.,Ltd. , https://www.srmfrailwayequip.com