Engineering emergency vehicle_road maintenance vehicle_iveco blue emergency vehicle-electric engineering vehicle

Engineering rescue vehicle_road maintenance vehicle_IVECO Blue Rescue Vehicle-Electric Engineering Vehicle A cooling system for an electric engineering vehicle, including an engine, the engine is equipped with a turbocharger, the turbocharger includes a turbine, a coupling and The compressor is provided with an EGR pipe before the turbocharger, and an EGR cooler is provided on the EGR pipe. It also includes an oil cooling system for lubricating the turbocharger and the engine. It also includes a water cooling system , Used to lubricate the oil cooling system and the EGR cooler. An exhaust pipe is also provided before the turbocharger for directing exhaust gas into the exhaust gas aftertreatment system without passing through the turbocharger The cooling system of the utility model can select whether the turbocharger is working, effectively cool the turbocharger and the intake air, balance the cooling demand between the various hot components of the engine, and improve the cooling efficiency of the system as a whole.



Iveco Electric Engineering Vehicle Price Manufacturer Telephone Liang Manager
Iveco electric engineering vehicles are used in a wide range, also known as electric emergency repair vehicles, Iveco engineering vehicles, Iveco highway emergency repair vehicles, engineering maintenance vehicles, Iveco municipal maintenance vehicles, road maintenance vehicles, subway maintenance vehicles, tunnel maintenance vehicles, railway maintenance, Iveco engineering emergency vehicles, highways Maintenance vehicles, pipeline rescue vehicles, landscaping maintenance vehicles, garden maintenance engineering vehicles, railway maintenance engineering vehicles, tunnel repair engineering vehicles, highway management engineering vehicles, highway emergency support vehicles

Electric engineering vehicles are special vehicles used in maintenance operations.

The scope of application of the emergency rescue engineering vehicle series is as follows:

â–²On-site rescue and repair of various emergencies;

â–²Pressure plugging of petrochemical equipment and long-distance oil and gas pipelines and on-site emergency repairs;

â–²Emergency repair of pumping stations and pipelines in oil fields;

â–²Emergency repair of urban water supply pipe network;

â–²Emergency repair of power supply lines;

â–²Emergency repair of gas pipeline;

â–²Emergency repair of telecommunications lines;

â–²Emergency repair of the field signal relay station of mobile communication;

â–²Emergency repair of expressway;

â–²Emergency repair of the railway;

â–²Cooperative work at the fire site;

â–²On-site emergency repair of equipment;

â–²Rescue for accidents at the scene of natural disasters.
Engineering emergency vehicle_Road maintenance vehicle Iveco Blue emergency vehicle-electric engineering vehicle shall not be leased out for official use. It is not allowed to borrow, occupy, or apportion or pass on the official car purchase fees and various related operating expenses of subordinate units or other related units. Establish and improve the infrastructure safety management system, set up safety management offices, and allocate full-time safety management personnel to continuously improve and perfect infrastructure safety management. Carry out national laws, regulations, and standards related to production safety, implement company safety work requirements, and formulate company infrastructure safety management systems and technical standards.


How much is the Iveco electric engineering vehicle and where is the manufacturer? Manager Liang
This car is widely used in oil fields, electric power, telecommunications, municipal administration, highway rescue, water supply, cable TV and other departments. It is an ideal car for engineering installation and emergency maintenance of related facilities.
Engineering emergency vehicle_road maintenance vehicle_IVECO Blue emergency vehicle-electric engineering vehicle non-disconnected drive rear axle, integral stamped and welded axle housing, and full floating half-axle greatly improve the stability and stability. Vacuum-assisted dual-circuit hydraulic braking, heating and cooling air-conditioning make driving safer and more comfortable. The whole vehicle is equipped with roof racks and other equipment.

Cold Drawn Steel Bar

Cold drawn steel bar is produced by hot rolled steel bar or wire rod to get smooth surface, more precision size, higher mechanical properties, which improves machining characteristics. It can also get various sections and sizes. So cold drawn steel bar is a better choice for machining users.

According to different steel grade, the production line is usually different. The Basic production line is as below:

For high carbon steel or alloy steel bars, to avoid the cracks in inner or surface, the bars are usually required to be annealed before cold drawing.

To get different mechanical properties or hardness depending on final usage, the cold drawn bars will also be heat treated such as annealed, normalized or quenched and tempered(Q&T).

For CNC machines usage, to get much more precision sizes or much more better surface roughness for chrome plating, the cold drawn steel bars can also be centerless ground or polished.

We have more advantages on producing cold drawn steel bars:

1) Big stocks of hot rolled round bars or wire rods as raw materials

2) Wide range of cold drawn steel bar sizes: from 10mm to 150mm

3) Different cold drawing medias powder or oil to get different surface

4) Straightening machines to get better straightness up to 0.5mm/m

5) Grinding and polishing machines to get better roughness upto 0.4um

6) Heat treating furnaces to adjust the mechanical properties

7) Full sets of testing equipment to test the sizes, mechanical properties and microstructure.

8) Multiple packages to avoid broken packages and anti-rusty

Cold Drawn Bar,Round Steel Bar,Cold Drawn Steel Bar,Aisi 1018 Steel Square Bar

SHANDONG LE REN SPECIAL STEEL CO., LTD. , https://www.sdbrightsteelbar.com