Specifications: Drive motor: Hysteresis synchronous motor drive Operating voltage: 200VAC, 50Hz / 60Hz (with AC24V, 110V to choose from) Power consumption: ≤ 5.7VA Valve body pressure: 1.6MPa Allowable pressure: ≤ 0.12MPa Applicable medium : Cold water, hot water Medium temperature: 2 ℃ -95 ℃ Ambient temperature: 0 ℃ -60 ℃ Opening and closing time: about 10 seconds, about 5 seconds off Installation and commissioning: Before installation must read the instructions carefully, cut off the power and Must be installed by professional and technical personnel. The flow direction must be the same as the direction of the arrow on the valve body. The valve body must be above the coil water tray to ensure that dripping falls into the water tray. The valve body and actuator must be mounted within ± 60 ° C vertical and at least 30 mm above the space for disassembly. With the surrounding pipelines, equipment, buildings must maintain sufficient space for maintenance operations, must be installed in the maintenance personnel through the manhole to reach the place. The valve body can be installed after pressure test and pressure test. If the actuator is already attached to the valve body, never apply force to the actuator during installation and commissioning as this may damage the actuator. After installation and check the correct, power debugging. At a minimum, observe the three full drive cycles and verify that all components are correct. After passing through the anhydrous test, pass the water test. The system pressure on the water must be strictly controlled within 0.15MPa, to ensure that the electric control valve on the effectiveness of the water switch. Scope of application Air-conditioning, heating, ventilation, domestic hot water and other civil system-level chemicals, petroleum metallurgy, electric light industry Industry production process of automatic control. Search Keyword: More Valve Product Information
We are the inventor of automatic down weighing and filling machine. All filling machines are applied in down garments enterprise filling process, and are applicable to 90, 80, 70, 60 and 50 down. High pressure air is used to absorb down through the automatic weighing system, and to fill the panel with a preset weight of down. With dual or triple or fourth weighting system, the speed of down-filling machine is 2-4 times faster than that of manual method, down-filling is no longer needed skilled workers. Non-contact weighing method is used and the highest precision of single down filling can reach 0.01g even 0.001g; According to given target gram weight, the actual down gram weight will be automatically increased or reduced as necessary during filling. At same time ,the application of central dust-removal system greatly improves the overall working and production environment of the down-filling workshop, it can lower down loss as well as reduce the cost of down and reuse the down.
*Related Products:down garment filling machine,down stuffing machine,down apparel filling machine,duck Down Filling Machine,flow down filling machine,down feather filling machine,down coat filling machine.
Down Filling Machine
Down Filling Machine, Down Jacket Filling Machine, High Output Down Filling Machine, Automatic Down Filling Machine, Down Garment Filling Machine, Down Stuffing Machine
Changshu Bealead Automatic Machine CO., LTD. , https://www.bealeadglobal.com