Our factory is specialized in different kinds of roll forming machine ,also we can design the machine according to you products details :
Roofing and wall panel roll forming machine ,Glazed tile roll forming machine ,Roof ridge cap roll forming machineÂ
Shutter door roll forming machine ,Pu foam shutter door production line,Door frame roll forming machineÂ
Ceiling keel roll forming machine,Tee grid roll forming machine ,C&Z purlin roll forming machine
Floor decking roll forming machine,Pipe roll forming machine and bending machineÂ
Gutter roll forming machine,Guardrail roll forming machine,Stone coated steel tile production lineÂ
Sandwich panel production line ,Slitting line,Curving machine,Decoiler,Cutting and bending machine
__________________________________________________________________________________________________________
       Â
         Decking Floor Cold Roll Forming Machine For Building Construction
Composition of roof roll forming machine
A. Uncoiler.......................................................................1 unit
B.Main roll forming machine  ·································· 1 unit
C. Control panel·····················································1 unit
D. Hydraulic pump..............................................................1 unit
E.Accepting table................................................................1 unit
Details of each roll forming machine composition:
(1) 4 feet manual uncoiler
(2)Capacity of the uncoiler  : 5 tons
(3) Range of segment expansion  : 460 ~ 515 mm
Â
Main roll forming machine
1. Forming stations  : 26stations
2. Material of roller  : 45# steel heat treatment HRC50 and surface is being hard chrome;
3. Shaft : Dia 80mm, high frequency surface treatment and grinding process;the material is 45#steel.
4. Horsepower  : 15KWÂ
5. Transmission  : Chains and gears
6. Forming speed  : 25 M/MINUTE
7. Forming thickness : 0.8Â -1.5mm
8. Cutting:Material of blade: Cr12; heat treatment HRC59~61
9. Approximate Size: Length:11.5Â M * Width : 1.5 M * Height : 1.3M
10.Characteristics of the main machine
   (1) Base is made of high tensile strength H beam with precision welded and
     good rigidity.
   (2)Shaft, roller and all components are manufactured precisely to have long
     lifetime.
Â
Control panel for decking roll forming machine
(1) Voltage, Frequency, Phase:Â Customizable
(2) Automatic quantity measurement
(3) 99 kinds of dimensions can be set in one order at the same time,
  Â
Hydraulic pump
Hydraulic system for cuttingÂ
The motor is used to drive the hydraulic pump ,which enables the hydraulic   oil to drive the hydraulic motor and then drives the main machine.
Accepting table( one manual for free)
1.material: welded steel rube and the rollers with rubberÂ
2.also suggest you the automatic stacker for the highe speed roll forming machineÂ
_________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Pre-Sales Service
* Inquiry and consulting support
* Sample testing support.
* View our Factory.
Â
After-Sales Service
* Training how to instal the machine, training how to use the machine.Â
* Engineers available to service machinery overseas.
_______________________________________________________________________________________________________
Packaging | |
Packing method: nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipment will be moisture-proof, anti corrosive, and will not be damaged during transportation.  | |
__________________________________________________________________________________________
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi(1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. How to get a quotation?
a. Give me the profile drawing and thickness, this is the important. If no,I will suggest you some.
b. Other specific requirements are welcome, such as the speed, power and voltage you want.
5. What can you do if the machine broken?
Our machine's warranty period is 12months! If the broken parts can't repair, we can send the new parts replace the broken parts free. If after warranty period,we can through negotiation for to solve the problems, and we supply the technical support for the whole life of the equipment.
6. Can you be responsible for transport?
Yes, please tell me the destination port or address. We have rich experience in transport.
7. You are trade company or factory?
We are factory. Welcome to our workshop for visiting.
8. How long the machine could be made?
Normally speaking, common roof profile roll forming machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a month.
8:If need more machine pictures or videos,welcome to contact me.
Â
Our factory is specialized in different kinds of roll forming machine ,also we can design the machine according to you products details :
Roofing and wall panel roll forming machine ,Glazed tile roll forming machine ,Roof ridge cap roll forming machineÂ
Shutter door roll forming machine ,Pu foam shutter door production line,Door frame roll forming machineÂ
Ceiling keel roll forming machine,Tee grid roll forming machine ,C&Z purlin roll forming machine
Floor decking roll forming machine,Pipe roll forming machine and bending machineÂ
Gutter roll forming machine,Guardrail roll forming machine,Stone coated steel tile production lineÂ
Sandwich panel production line ,Slitting line,Curving machine,Decoiler,Cutting and bending machine
__________________________________________________________________________________________________________
       Â
         Decking Floor Cold Roll Forming Machine For Building Construction
Composition of roof roll forming machine
A. Uncoiler.......................................................................1 unit
B.Main roll forming machine  ·································· 1 unit
C. Control panel·····················································1 unit
D. Hydraulic pump..............................................................1 unit
E.Accepting table................................................................1 unit
Details of each roll forming machine composition:
(1) 4 feet manual uncoiler
(2)Capacity of the uncoiler  : 5 tons
(3) Range of segment expansion  : 460 ~ 515 mm
Â
Main roll forming machine
1. Forming stations  : 26stations
2. Material of roller  : 45# steel heat treatment HRC50 and surface is being hard chrome;
3. Shaft : Dia 80mm, high frequency surface treatment and grinding process;the material is 45#steel.
4. Horsepower  : 15KWÂ
5. Transmission  : Chains and gears
6. Forming speed  : 25 M/MINUTE
7. Forming thickness : 0.8Â -1.5mm
8. Cutting:Material of blade: Cr12; heat treatment HRC59~61
9. Approximate Size: Length:11.5Â M * Width : 1.5 M * Height : 1.3M
10.Characteristics of the main machine
   (1) Base is made of high tensile strength H beam with precision welded and
     good rigidity.
   (2)Shaft, roller and all components are manufactured precisely to have long
     lifetime.
Â
Control panel for decking roll forming machine
(1) Voltage, Frequency, Phase:Â Customizable
(2) Automatic quantity measurement
(3) 99 kinds of dimensions can be set in one order at the same time,
  Â
Hydraulic pump
Hydraulic system for cuttingÂ
The motor is used to drive the hydraulic pump ,which enables the hydraulic   oil to drive the hydraulic motor and then drives the main machine.
Accepting table( one manual for free)
1.material: welded steel rube and the rollers with rubberÂ
2.also suggest you the automatic stacker for the highe speed roll forming machineÂ
_________________________________________________________________________________________________________
__________________________________________________________________________________________________________
Pre-Sales Service
* Inquiry and consulting support
* Sample testing support.
* View our Factory.
Â
After-Sales Service
* Training how to instal the machine, training how to use the machine.Â
* Engineers available to service machinery overseas.
_______________________________________________________________________________________________________
Packaging | |
Packing method: nude, with waterproof cloth and stow-wood. The computer controlled cabinet is packed with waterproof cloth and box. The seller should guarantee equipment will be moisture-proof, anti corrosive, and will not be damaged during transportation.  | |
__________________________________________________________________________________________
1. Does one machine can only produce one style panel profile?
Not exactly.For wider and double layer making machine. It can produce more than 6 kinds of panels.
2. Do you have after sales support?
Yes, we are happy to give advice and we also have skilled technicians available across the world.We need your machines running in order to keep your business running.
3. How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi(1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours), then we can pick up you.
4. How to get a quotation?
a. Give me the profile drawing and thickness, this is the important. If no,I will suggest you some.
b. Other specific requirements are welcome, such as the speed, power and voltage you want.
5. What can you do if the machine broken?
Our machine's warranty period is 12months! If the broken parts can't repair, we can send the new parts replace the broken parts free. If after warranty period,we can through negotiation for to solve the problems, and we supply the technical support for the whole life of the equipment.
6. Can you be responsible for transport?
Yes, please tell me the destination port or address. We have rich experience in transport.
7. You are trade company or factory?
We are factory. Welcome to our workshop for visiting.
8. How long the machine could be made?
Normally speaking, common roof profile roll forming machine could be made within 45 working days.
If you need machines in a hurry, we can make it for you less than a month.
8:If need more machine pictures or videos,welcome to contact me.
Â
All-rounder work center
PTP all-rounder CNC working center is high automatic machinery, it is widely used for engraving, drilling,cutting,milling,chamfer.
This is the professhional machine for the pannel drilling, customized size, customized modle for your reference.
PTP all-rounder working center application materials: Our PTP all-rounder CNC working center is high automatic machinery. It is suitable for various complex processing of work pieces, widely used for engraving, drilling,cutting,milling,chamfer. MDF, wood, organic glass, PVC, double color board, laminboard, aluminium, copper,etc. PTP all-rounder working center application Industries: panel furniture industry,wood furniture,solid wood doors,decorative materials,cabinets doors,computer tables,mahjong table,office furniture,wooden sound box,kitchenware,etc. Also applied to non-metallic mold,automobile mold,foam processing industry.
Ideal for panel furniture, solid wood furniture, office furniture, wooden door productions, as well as other non-metal and soft metal applications.
Features worlds first class components and strict machining procedures.
Word famous brand spare parts optional: Italy HSD Drilling package, Japan Yaskawa Servo Motor, Taiwan Delta driver, Taiwan HIWIN Linear Guide rail, Taiwan H glass Ball screw rod etc.
The number of the product, zero error rate. A CNC drilling efficiency can be equivalent to the traditional six rows drilling and production efficiency of four to five (limited to small customized products). Can and popular elements on the market at present software seamless docking, the realization of digital production of custom furniture. For custom furniture industrial digital production, provides the reliable device can replace the imported similar products country. Meet the needs of the masses of small and medium-sized furniture enterprises, liberated the labor force, improve the quality of the product configuration.
All-rounder work center
Ptp Cnc,Wood Cnc Router Machine,Cnc Router Ptp Machine,Ptp Woodworking Center, All-rounder work center
Nanjing Diding Numerical Control Technology Co.,Ltd. , https://www.dinglicncmachine.com