Circulating water vacuum pump maintenance 1. Normal working bearing than the ambient temperature is high 15 ℃ -20 ℃, maximum not allowed to exceed 55 ℃ -60 ℃ :, the normal working bearing should be loaded 3-4 times a year. Clean the bearings at least once a year and replace the lubricant holders.
2. Frequently check? Counseling? In the case of packing seals, the packing should be compacted regularly. If the packing can not guarantee the required sealing performance due to wear, new packing should be replaced. British Prime packing vacuum pump can not be pressed too tight. Normally packed packing, allowing water to drip out, to ensure cooling and to enhance tightness.
4. If the parking time is more than one day, the water in the pump and water separator must be released to prevent corrosion.
5. If the mechanical seal, the phenomenon of leakage, mechanical seals should check the dynamic and static ring is damaged, or the seal has been aging, in case of the above, are required to replace the new parts.
2. Frequently check? Counseling? In the case of packing seals, the packing should be compacted regularly. If the packing can not guarantee the required sealing performance due to wear, new packing should be replaced. British Prime packing vacuum pump can not be pressed too tight. Normally packed packing, allowing water to drip out, to ensure cooling and to enhance tightness.
4. If the parking time is more than one day, the water in the pump and water separator must be released to prevent corrosion.
5. If the mechanical seal, the phenomenon of leakage, mechanical seals should check the dynamic and static ring is damaged, or the seal has been aging, in case of the above, are required to replace the new parts.
Chongqing Huanyu Automobile Sales Company , https://www.huanyuautos.com