Everyone knows that the belt is a very important part of the car. Whether it is an engine or other systems, the belt plays an important role, so we must protect our car belt, then, in turn, how should we maintain it? Our car belt, Xiaobian summed up some relevant knowledge about the car belt , the following small series will introduce to you.
Car belt maintenance method
First, wear and aging
First, the owner should observe the aging and wear of the belt. If the wear is serious or the aging degree is high, then it should be replaced in time. Continued use may cause a great safety hazard and also affect the normal life of the owner. .
Second, the tension is insufficient
There is often a phenomenon of belt slippage. If the belt is not damaged, the tension of the belt is generally too small, and it is necessary to reflect. You can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10 kg, and if the belt pressing amount is about 10 mm, the belt tension is considered to be suitable. Assuming that the amount of reduction is too large, the tension of the belt is considered to be lacking. Assuming that the belt has almost no reduction, the tension of the belt is considered to be too large.
However, it must be noted that the tension of the belt should not be too large. Excessive tension will cause some damage to the components, so proper tension is very necessary.
Third, matters needing attention
If the car belt is aging or seriously damaged, then Xiaobian recommends going to the car repair shop for replacement, to ensure the most suitable tension is very important, otherwise the car parts can not work properly. The belt is seriously worn, and the contact area between the belt and the pulley is sharply reduced, so that it is prone to breakage.
Car repair is defined for car engine belt wear and aging prevention. A rare root belt is defined at the front end of the machine, and each belt bears the primary result. On the proposed machine, various types of auxiliary machines are driven via belt drives, such as air conditioner shrinking machines, power steering oil pumps, alternators, and the like. Assuming that the belt is broken, and there may be slippage, it will cause the related auxiliary machine to lose its function, or its function will be reduced, and then affect the normal use of the car.
The reflection method of the belt is very simple. First, reflect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10 kg, and if the belt pressing amount is about 10 mm, the belt tension is considered to be suitable. Assuming that the amount of reduction is too large, the tension of the belt is considered to be lacking. Assuming that the belt has almost no reduction, the tension of the belt is considered to be too large. When the tension is lacking, the belt is slippery. When the tension is too large, the bearings of various auxiliary machines are easily damaged. To this end, the relevant adjustment nut or bolt should be loosened to adjust the tension of the belt to the shape.
In addition, car repairs must also pay attention to the wear of the belt. The old belt is worn out seriously, causing a sharp drop in the contact area between the belt and the pulley. At this time, the belt is pressed hard and the belt is deeply sunk into the groove of the pulley. The rubber of the belt also has an aging problem. If the belt rubber is seriously aged, it is necessary to change the new belt in time.
Some small knowledge about car belt maintenance will be introduced here first. I hope that the above summary can help everyone, so we must protect our car belts in the future, so as not to cause serious consequences.
Single Screw Extruder,Twin Screw Extruder,Small Granulator,15 Screw Extruder,20 Screw Extruder
Dongguan Zhenggong Electromechanical Equipment Technology Co., Ltd , https://www.mixer-cn.com