Black Wax Using New Formula with High Gloss

BLACK WAX
Features:
 
  This product is made of raw material extracted from the natural palm wax in Brazil.The wax is fine and smooth, has good ductility and deep absorption ability.Unique black pearl essence helps to form a protective reticular membrane on the surface of car paints, efficiently remove dirts and stains, immediately improve the glossiness of painted surfaces, restore the luster of car paints, prevent oxidation and color fading.
 
Directions:
 
First flush the vehicle with clean water. Remove dirts and stains on car body with neutral car washing liquid.Blow off the water and keep car body dry.
Unpack the product, dip suitable amount with sponge and spread thinly on the car body.
Wait for drying (5 to 10 mins in Summer, 15 to 20 mins in Winter) and wipe with soft clean towel.
Operation points: Before operation, it is suggested to remove stains, water scale and iron powder on car paints with clay.For engine hood and vehicle doors etc., the operation needs to be done step by step.
This product only has the function of polish, not suitable for removing deep scratches. if scratch removing is necessary,please first use polishing agent.
Please use specialized sponge and wiper.
 
precaution:
 
Shall not be used for any other purposes.
Avoided treating car body under long exposure to sunshine, which will cause uneven treatment effect.
Should not be applied to deteriorated car paints likely to color fade and get rash.
Avoid treatment at dusty, windy and sabulous places, otherwise scratches will occur to painted surface.
Avoid long time lay-aside after treatment, otherwise, the product will be hard to remove and the painted surface will get rash and uneven.
Do not use on the surface of other materials (such as plastic, tire, rubber, glass etc.) except for car paints. if unintentionally used on other materials, please immediately wipe off the product.
Once opened, use up before losing effectiveness.
This product is special for dark colour cars, for other colors cars, please have a trial on a small area to decide whether to continue to use.
 
This is Oleg from Tonyin Industrial Co., ltd, manufacturer & supplier of car care products. We are engaged in about 120 kinds of products.
For Exterior: 9H Nano Ceramic, Polish Compound, Polish Pads, Clay Bar, Auto Wax, Shampoo, Towels…
For Interior: Coating for Leather & Plastic & Headlight, Interior Cleaner, Dashboard Polish(Protectant Wipe)…
For Glass: Glass Coating, Anti-rain, Anti-Fog, Glass Cleaner…
For Wheel: Tyre Foam Cleaner, Tyre Inflator, Iron Off (Wheel Cleaner), Tyre Gel, Rubber Paint…
For Engine: Carb Cleaner, Injector Cleaner, Oil treatment, Catalytic Cleaner, Fuel System Cleaner, Brake Fluids, Engine Cleaner…
Others: Coolant, De-Rust, Spray Paint, A/C Cleaner, Air freshener, and so on.Currently our products have been sold in Europe Union, USA, Mexico, Russia, Turkey, Singapore about 30 countries.
Any interests, pls feel free to contact us. Sample could be send for your testing if necessary.

Look forward to cooperating with you.

Oleg Wong
Marketing Executive
TONYIN INDUSTRIAL CO., LTD
A: 23I, Tianzhi Int'l Mansion, Free Trade Zone, Qingdao, China.
T: +86-532-86945891  M: +86 185 6175 6871 
  W: www.tonyingroup.com
  BLACK WAX
Features:
 
  This product is made of raw material extracted from the natural palm wax in Brazil.The wax is fine and smooth, has good ductility and deep absorption ability.Unique black pearl essence helps to form a protective reticular membrane on the surface of car paints, efficiently remove dirts and stains, immediately improve the glossiness of painted surfaces, restore the luster of car paints, prevent oxidation and color fading.
 
Directions:
 
First flush the vehicle with clean water. Remove dirts and stains on car body with neutral car washing liquid.Blow off the water and keep car body dry.
Unpack the product, dip suitable amount with sponge and spread thinly on the car body.
Wait for drying (5 to 10 mins in Summer, 15 to 20 mins in Winter) and wipe with soft clean towel.
Operation points: Before operation, it is suggested to remove stains, water scale and iron powder on car paints with clay.For engine hood and vehicle doors etc., the operation needs to be done step by step.
This product only has the function of polish, not suitable for removing deep scratches. if scratch removing is necessary,please first use polishing agent.
Please use specialized sponge and wiper.
 
precaution:
 
Shall not be used for any other purposes.
Avoided treating car body under long exposure to sunshine, which will cause uneven treatment effect.
Should not be applied to deteriorated car paints likely to color fade and get rash.
Avoid treatment at dusty, windy and sabulous places, otherwise scratches will occur to painted surface.
Avoid long time lay-aside after treatment, otherwise, the product will be hard to remove and the painted surface will get rash and uneven.
Do not use on the surface of other materials (such as plastic, tire, rubber, glass etc.) except for car paints. if unintentionally used on other materials, please immediately wipe off the product.
Once opened, use up before losing effectiveness.
This product is special for dark colour cars, for other colors cars, please have a trial on a small area to decide whether to continue to use.
 
This is Oleg from Tonyin Industrial Co., ltd, manufacturer & supplier of car care products. We are engaged in about 120 kinds of products.
For Exterior: 9H Nano Ceramic, Polish Compound, Polish Pads, Clay Bar, Auto Wax, Shampoo, Towels…
For Interior: Coating for Leather & Plastic & Headlight, Interior Cleaner, Dashboard Polish(Protectant Wipe)…
For Glass: Glass Coating, Anti-rain, Anti-Fog, Glass Cleaner…
For Wheel: Tyre Foam Cleaner, Tyre Inflator, Iron Off (Wheel Cleaner), Tyre Gel, Rubber Paint…
For Engine: Carb Cleaner, Injector Cleaner, Oil treatment, Catalytic Cleaner, Fuel System Cleaner, Brake Fluids, Engine Cleaner…
Others: Coolant, De-Rust, Spray Paint, A/C Cleaner, Air freshener, and so on.Currently our products have been sold in Europe Union, USA, Mexico, Russia, Turkey, Singapore about 30 countries.
Any interests, pls feel free to contact us. Sample could be send for your testing if necessary.

Look forward to cooperating with you.

Oleg Wong
Marketing Executive
TONYIN INDUSTRIAL CO., LTD
A: 23I, Tianzhi Int'l Mansion, Free Trade Zone, Qingdao, China.
T: +86-532-86945891  M: +86 185 6175 6871 
  W: www.tonyingroup.com
 

LINA Disassemble Dispersion Kneader

LINA  disassemble dispersion kneader provides excellent cleaning performance especially for sticky materials. Without affecting dispersion kneader's mixing effect, the rotor can be separated easily from the mixing chamber. This type of dispersion Internal Mixer is suitable for a variety of materials and able to provide a better performance dust seal for preventing material leakage.

 

Special design for CIM & MIM

1. Higher cleanness: Clean up the material without dead corners; the mixing chamber and rotors of the dispersion kneader can be separated completely; All surface that directly contact with the material is mirror polished, which ensure all the materials easy to clean without stickiness.

2. Wearable inner cavity: Imported special new alloy steel and vacuum heat treatment are adopted. Strong wear resistance, resistance to horizontal erosion, corrosion resistance and high glossy finish effects are achieved.

3. Adjustable rotor speed ratio: The speed ratio of rotors is adjustable, which target at some special material function requirements and achieve best dispersion effect and efficiency. The kneader with adjustable rotor speed ratio is designed especially for those materials that are sensitive of temperature/high require of different temperature/fast change rate of temperature/fast and span molecular chain diversification.

4. Temperature control system: A lot of trials report that stage temperature control has the essential effect of ceramics` color difference. 

5. PLC intelligent control system: 1. Real-time data record and export of kneading time, temperature (mixing chamber and front/rear rotors), ram pressure, current, torque and recipe code. 2. The control system can be set up to 20 mixing steps, save 20 recipe spaces. 3. The control system is capable of remote importing of the process recipe and data monitoring, and communicating with MES via Ethernet communication interface.  4. An Ethernet communication interface and 20% of the control points are reserved. Touch screen is provided.

 

 

 

Specifications of LINA Disassemble Dispersion kneader

 

Type	Size (L)	Dimension (mm)	Weight (kg)
LN disassemble dispersion kneader	0.5	1600*900*1900	800
	1	1600*900*1900	800
	2	1600*900*2000	900
	3	1600*900*2100	900
	5	1900*1000*2100	1200
	10	2200*1350*2150	2500

Disassemble Kneader

Disassemble Dispersion Mixer,Disassemble Kneading Machines,Rubber Disassemble Dispersion Mixer,Ceremic Disassemble Mixer

LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com