Technical Parameters:
Model |
HX-160 |
Voltage |
220V(convertible) |
Power |
375W |
N.W. |
83kg |
G.W. |
133kg |
Cutting Length |
0.1~9999.9mm |
Cutting precision |
±0.1mm |
Cutting speed |
100-120cut/min(take 50 mm for example) |
Cutting Width |
1~160mm |
Measurement |
550x550x1000mm |
Features:
1. Computer controlled PLC system, full automatic .
2. Owing to the servo motor the cutting length is accurate,high precision can reach 0.1mm.
3.Automatic to preset length, quantity & speed on touch screen, it is not erased .even ifÂ
power off & on.
4.Cutting length and cutting speed tunable
5.the cutting speed is 100~120 cut per minute. (take 50mm long for example).
6.Cut up to 160mm wide material or multiple rolls.
7.cutting is neat due to using a cold cutter like scissors and blades are durable .
8.Full English LCD display,easy operating.and you can check the operation manual
 brochure, we will send together with the machine.
9.cutter safety guard included,no danger risk.
10.adjustable pressure on feed roller for thin or smooth materials.
11.this plastic cutter machine  is including one unwinding material rack.
Application:
Ideal for cutting  heavy production to cut non adhesive material,such as variousÂ
tube,tape,label,Velcro,conductive foam,fabric,metal foil,PVC,PET,OPP,PP,CPP,LDPE,
PVC sleeve,craft paper,insulation paper,trademark,PVC pipe,rubber hose,belt loop,
leather belt,plastic strip,plastic zipper etc.
After-service:
1. Warranty for machines is 12 months
2. A promptly reply within 24 hours
3. Free usage training before delivering machines in factory
Details of this belt cutting machine
Â
Vacuum forming is a manufacturing process used to create car parts by heating a plastic sheet and then stretching it over a mold using vacuum pressure.
You may probably find the automotive industry is the most made by vacuum forming,both for comsumer and commercial vehicles,trucks, and buses.Usually the vacuum forming car parts contain:Front bumper, rear bumper, ceiling, roof luggage compartment, wheel arches, doors, tailgate padding, dashboard, fenders, car logo, and interior and exterior plastic decorations.
In addition, the plastic trays which are used for the transportation of the engine block and cylinder also was made by vacuum forming.
Vacuum Forming Car Parts,Vacuum Forming Auto Parts,Thermoforming Car Parts,Thermoforming Auto Carts
Dongguan Yiyongli Industrial Co.,Ltd. , https://www.absthermoforming.com